US$1.00 - US$2.20 / Kilogram | 5 Kilogram/Kilograms (Min. Order) Payments:This supplier also supports L/C payments. Quick Details Place of Origin: GBA-Alderney Usage: Building Coating State: Emulsion Model Number: REGENT GYPSM PUTTY Main Raw Material: GYPSM PUTTY Main Raw Material: GYPSM PUTTY Brand Name: REGENT GYPSM PUTTY Supply Ability Supply Ability: 20000 Ton/Tons per Year Packaging & Delivery Port Jebel Ali Lead Time : As per your Requirement Product DescriptionSpecially designed Gypsum putty for decoration purpose for gypsum board joint, which provides excellent adhesion to the surface, modified water borne acrylic emulsion Description: Mostly using in interior decoration purpose on concrete Gypsum board, walls, woods, plaster etc Properties: Colour: White Finish: Smooth Solids: 70% Specific gravity: 1.65 +/- 0.03 Theoretical Coverage: 2 �¢??3 m2/ltr Drying time : At 25 To handle: �½ hour To Recoat: Over night Number of coats: 1 Precautions: Keep from freezing, contains water. May cause eye , nose, and throat and skin irritation. Keep out of the reach of children Packing: Metal drums one US gallon, 5 US gallons Category: Emulsion. Tags: gypsm putty, putty. Place of Origin: Alderney Main Raw Material: Gypsm putty Packaging & Shipping In 25kg paper bags inner with PE bags Bulk Shipping: We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
CONTRACTOR LATEX A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Paints contractor latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints contractor latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet. ROPERTIES Colour : Full range - as per shade card Finish : Matt Solids(Volume) : 52% and above Specific Gravity : 1.40 +/- 0.1 Theoretical Coverage : 250 - 400 sq. ft. per gallon DRYING TIME AT 25 T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic copolymer
STUCCO PUTTY A heavy pigmented and highly thixotropic acrylic wall filler, having excellent adherence to the wall and good durability. PROPERTIES Colour : White Finish : Matt Solids: 70% +/- 2% Specific gravity: 1.7 +/- 0.03 Theoretical Coverage 5-8 m2/ltr depends of surface DRYING TIME â?? AT 25 �° To touch: 1/2 hour To Recoat: 1 hours Number of coats: 1-2
ACRYLIC THINNER IT is a blend of Alcoholâ??s, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor : Characteristic Non - volatile matter : Nil S.g kg/l: 0.850�±0.05 Flash Point (ASTM D93) Not less than 12 �°C Description Review
G P THINNER It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor: Characteristic Non-volatile matter : NIL S.g kg/l :0.850�±0.05 Flash Point (ASTM D93): Not less than 12 �°C
MICRO TEX Micro tex is a textured coating containing quartz, based on modified Acrylic emulsion, will give a flexible finish with medium textured, PROPERTIES Colour : As per shade card Finish : Light texture finish Consistency: Thixotropic Solids: 50 % +/- 2 % Specific gravity: 1.55 Theoretical Coverage 2.5 â??3.5 m 2/ ltr DRYING TIME : AT 25 �° To handle: 3-4 hours To Recoat: overnight Number of coats: 1 -2 Application by: Roller or brush Description Review It is suitable for exterior and interior surfaces of cement plaster, concrete, bricks, masonry, asbestos cement panels and suitably primed wood. Magnum helps to conceal any small unevenness and indents in the surface. APPLICATIONS: Surface should be clean and dry, before the application of medium Tex. For the fresh concrete Tollens Tex primer should be used as a primer on new surfaces. SURFACE PREPARATION: Surface must be clean and free of, chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence PRECAUTIONS: Keep from freezing, contains water. Using at temperatures above 4ï?°C May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Metal drums one US gallon, 5 US gallons
It is a mixture of aromatic Hydrocarbon, esters, ketone. It is recommended for Polyurethane varnishes due to its average evaporation PROPERTIES CHARACTERISTICS APPEARANCE COLOR TRANSPARENT LIQUID Specific Gravity ASTM D 3505 0.85 �±.02 Kg. / lit. Colour (Saybolt) ASTM D 1209 +30 Initial Boiling Point ASTM D 850 112�° C Copper Corrosion ASTM D 849 None Non â?? Aromatics ASTM D 2360 40 â?? 50% Flash Point (Abel) IP 170 24 �° C PRECAUTIONS: Contents are Combustible. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Do not use in tank or pit without proper protection Metal drums one lit. 1US gallon, and 5 US gallons
A general-purpose alkyd based primer with anticorrosive red iron oxide pigment for the protection of steel surfaces against moderate corrosive environments.It is an economical anticorrosive primer for general-purpose applications. USES It is recommended for mild steel structures and surfaces in domestic and mild corrosive environments. It is suitable for interior and exterior use. PROPERTIES Colour, Dry Film : Red Finish, Dry Film : Smooth/Matt Volume Solids, % 51�± 2 Specific Gravity : 1.46�± 0.05 Theoretical Spreading Range : 11-12 M2/L Recommended Dft Range (Dry Film Thickness) : 35-45 Microns/Coat Recommended Wft Range (Wet Film Thickness) : 75-90 Microns/Coat Flash Point : 38 �° C Flexibility : Good Drying Time : @ 30 �° C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.) Dry To Recoat/Overcoat : 12 Hours Hard Dry : 24 Hours
>=100 Liters US$ 2.50 Payments:This supplier also supports L/C,T/T,Western Union payments.
Latex at the best Performance of durability tests in any walls, woods and few metals as well. An adventurous Range to sustain the sheen level and coverage of solvent based products. Adding value to extra coverage, low voc, non yellowing, acrylic features, water dilution and more. A Regent Hi-Performance and durable product. A water - base, acrylic semi-gloss paints for interior surfaces. Excellent for heavy use areas such as walkway walls, doors, trim and kitchen cabinets. USES A semi - gloss finish, acrylic resin emulsion formulated to protect and beautify interior surfaces. Excellent for masonary (concrete, cement block, cinder block), wall board, stone, brick, and wood. May also be used on properly primed steel.
Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating. USES Velvet Acrylic Emulsion is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create atractive aesthetic velvet like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet.
FLAT VARNISHES An oxidative drying varnish based on a mixture of alkyds and drying oils. PROPERTIES Colour : Transparent; flat Solids: 42% Theoretical Coverage 6 â?? 7 m2/lit DRYING TIME :â?? AT 25 �° To handle: 4 hours To Recoat: 8 hours Flash point: 38 �° C ( ISO 367 â??83) Specific gravity: 0.90 Solvent: G.P. thinner.max.up to 10% to b added
Industrial Fast drying enamel black. RECOMMENDED USE On metallic surfaces, especially suited for heavy equipments, vehicle etc, especially for defense purpose. PROPERTIES Colour : Special colors available on request. Finish : Smooth and glossy Volume Solid: 35 �± 2 % Viscocity: 200 �± 15 secs in ford cup no. 4. @ 30�ºc S.G. Kg/l: 1.05 Theoritical coverage rate: 10 â?? 12m�²/ ltr Recommended (D.F.T.) Microns 30 Recommended (W.F.T.) Microns 90 Stoving schedule: 120�ºc for 30 minutes
100 Gallon/Gallons (Min. Order) Payments:This supplier also supports L/C,T/T,Western Union payments. Quick Details Place of Origin: United Arab Emirates Usage: Building Coating, Texture Paint for interiors and exteriors. State: Alkyd Model Number: Regent high gloss enamel Premium Main Raw Material: Acrylic Application Method: Brush Brand Name: Regent Paints Supply Ability Supply Ability: 20000 Gallon/Gallons per Day Packaging & Delivery Port Jebel Ali Lead Time : As per your Requirement High gloss enamel is formulated to meet the extremes of exterior exposure in addition to performing the functions of high durable interior enamel for use in bathrooms, kitchens, and laundries. Colour: Full spectrum Solids: 52 % + Gloss: 80 Above Theoretical Coverage: 350 - 500 sq. ft. per gallon Recommended film thick. 63(wet); 29�?�¼ (dry) Drying time At 25: To handle: 4 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.0 - 0.1 Flash point: 23C Categories: Decorative Paints, alkyd base enamel paint, Premium Range. Description Reviews Packaging & Shipping1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs 1 US Gallon, 5 US Gallon Bulk Shipping: We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes
>=100 US$11.50 Shipping: Support Sea freight Payments:This supplier also supports L/C payments. Place of Origin: ; AE-United Arab Emirates Usage: : Building Coating, Texture Paint for State: Liquid Coating, Liquid Coating Main Raw Material: Acrylic Application Method: Brush Brand Name: Regent Paints Packaging & Delivery Port Jebel Ali Lead Time : As per your requirements Product Description Main Raw Material Acrylic Brand Name Regent Paints Application Method Brush
ACRYLIC TOP COAT it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition. PROPERTIES Colour : full range Solids: 38 + 2 % Theoretical Coverage 9 â??12 m2/Lit Recommended (Dft) : 30 - 40 Microns/ per coat Recommended (Wft) : 90-100 Microns/ per coat DRYING TIME â?? AT 25 �° Surface Dry: 5-10 mins To Recoat: 3 â?? 4 hours Vehicle type: Modified alkyd Specific gravity: 1.15 �±0.05 (depends on color)
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 �± 2% Specific gravity 1.40 at 25�° C Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M) DRYING TIME :â?? AT 25 �° T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Flash Point: 35�° C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion. PROPERTIES Gloss level: matt (ISO 2813-78) Solids: 25% (+/- 2 %) Viscosity: 22000 cps @25 �°C Brookfield 4/4) Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u) DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: 24 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Specific gravity: 1.03 (+/- 2%) Flash point: Inflammable liquid.