Emulsion Paint Suppliers and Manufacturers

Product data sheet Flutex 10 Product description Type: Latex wall paint, based on acrylic binder, matt. Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot cleaning. The opacity of tinted colours is indicated on the tinting label. Product application Suitable interior for walls, e.g. in institutions, offices, living rooms and corridors, where the surface is exposed to dirt and/or wear. Technical data Density: 1,35 kg/litre Gloss: 10, matt Solids: Weight%: 56 Vol.%: 40 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top Level (GB/T 9266-1988) Water vapour permeability: Sd= 0.21m equal to class 2, according to EN 7783-2 Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Max. atmospheric humidity 80% RH Drying time at 20oC, 60% RH: Dry to touch: 1 h Recoat interval: 2 h Fully cured: Several days Dilution: 1st coat: Max. 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L.

Flugger data sheet Facade 25 Product description Type: Acrylic emulsion elastomer wall covering facade paint, matt. Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface. The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments. Protects the surface against formation of mould. The opacity of tinted colours is indicated on the tinting label. Product application Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc. Technical data Specific gravity: 1,35 kg/litre Gloss: 9 Solids: Weight%: 58 Vol.%: 43 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top level (GB/T 9266-1988) Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Maximum atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: 1st coat: 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L & 18.2L.

Strong dirt resistance; Easy application Rapid drying speed, 12000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity: 100 ku *solid content:53% *voc: ín47 g/l 1l drum; 5l drum; 18l drum

Water Base Paints Emulsions for Paints Industries

Appearance : White / pigmented viscous Odou : Slight acrylic odour Specific Gravity : 1.3 ± 0.1 at 25oC pH : 7.0 to 10.00

RITVER is a Italian paints manufacturing in Dubai. Shield Emulsion is a strong silk washable coating for exterior and interior building walls that face heavy moisture/humidity, anti carbonation and salinity

RITVER is a Italian paints manufacturing in Dubai. Shield Emulsion is a strong silk washable coating for exterior and interior building walls that face heavy moisture/humidity, anti carbonation and salinity

It is ue standards, bis, iso 9000, and iso 14001 We have enamal piants, emulsion paints, and all the ranges of paints. It comes in 1lts , 1 usg= 4 ltr. , and 5 usg= 19 ltr.