Product data sheet
Flutex 10
Product description
Type: Latex wall paint, based on acrylic binder, matt.
Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot
cleaning.
The opacity of tinted colours is indicated on the tinting label.
Product application
Suitable interior for walls, e.g. in institutions, offices, living rooms and
corridors, where the surface is exposed to dirt and/or wear.
Technical data
Density: 1,35 kg/litre
Gloss: 10, matt
Solids: Weight%: 56 Vol.%: 40
Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£©
Wash ability Top Level (GB/T 9266-1988)
Water vapour permeability: Sd= 0.21m equal to class 2, according to EN 7783-2
Application temp.: Recommended min. working temperature during
drying/curing: +10¡æ
Max. atmospheric humidity 80% RH
Drying time at 20oC, 60% RH: Dry to touch: 1 h
Recoat interval: 2 h
Fully cured: Several days
Dilution: 1st coat: Max. 10% water
2nd coat: Undiluted
Cleaning of tools etc.: Water
Storage: Cool, frost-free and tightly closed.
2.8L & 9.1L.
Flugger data sheet Facade 25 Product description Type: Acrylic emulsion elastomer wall covering facade paint, matt. Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface. The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments. Protects the surface against formation of mould. The opacity of tinted colours is indicated on the tinting label. Product application Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc. Technical data Specific gravity: 1,35 kg/litre Gloss: 9 Solids: Weight%: 58 Vol.%: 43 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top level (GB/T 9266-1988) Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Maximum atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: 1st coat: 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L & 18.2L.
Product description Type: Acrylic emulsion primer. Flugger Sealer is formulated with an acrylic micro-dispersed binder with unique penetration properties. Is alkaline resistant and provides an efficient sealing on slightly chalking and absorbent surface. Product application Suitable for interior priming of building materials, e.g. gypsum board, light concrete, limestone, brick, plaster, cement fibre plates, concrete as well as fillers. Technical data Density: 1,01 kg/litre Solids: Weight%: 14 Vol.%: 13 Spreading rate: 3-7 m2per litre depending on the substrate Application temp.: Min. working temperature during application and drying/curing: + 10¡æ Max atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: Water Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 10L.
