Vintage vinyl records.
Ring Carded cotton yarn from Ne 7/1 to Ne 30/1
Wood product, sunflower oil, agricultural products, candy, medical, biofuel, scraps, soft drinks, hot drinks, energy drinks, spices.Transportation service
Sheet 65g, Wire, Sheet, Electrical Steel, Dynamo Steel, Transformer Steel, Punched Sheet, Hexagon, Circle, Wire For Welding Cast Iron, Cast Iron Pipe, Cast Iron Circle, Galvanized Roll, Galvanized Wire, Galvanized Pipe Copper Sheet, Copper Plate, Copper Pipe, Copper Circle, Copper Wire, Copper Strip, Copper Phosphor Mf9, Copper Bus Brass Sheet, Brass Strip, Brass Bushings, Brass Circle, Brass Pipe, Brass Wire, Brass Mesh, Brass Ingot, Bronze Bushings, Bronze Circle, Bronze Wire, Bronze Tubes, Bronze Sheet, Bronze Casting, Titanium Sheet, Titanium Tube, Titanium Circle, Titanium Wire, Aluminum Sheet, Aluminum Sheet Leather (orange Peel), Aluminum Plate, Corrugated Aluminum Sheet, Perforated Aluminum Sheet, Aluminum Tube, Aluminum Profile Tube, Anodized Aluminum Tube, Aluminum Circle, Aluminum Wire, Aluminum Tape, Aluminum Foil, Aluminum Corner, Aluminum Bus, Aluminum Strip, Aluminum Square, Aluminum Brand, Aluminum I Beam 14, Nichrome Wire.
Perforated racks for tools, metal racks for super markets and mini markets, wire mesh products (promotion tables, point of sales areas, wire containers and customers trolleys, brand racks (for cd products, motor oils, tights, printed leaflet products), trolleys (cages) for logistics companies..
The drum brakes are applied for stopping and holding shafts of mechanisms in a braked position as the driving gear is off.
The electro-hydraulic thruster is employed as a driving gear for spring-applied drum brakes of lifting equipment as well as other machinery serving for mechanization of various production processes.
Applications: designed for delivering treated water (feedwater) at the pumping temperature of up to 438К ted, nsure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication (with forced lubrication from a pressure lubrication installation for the pump pe 270-150). The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise (clockwise in case of pe 270-150), if viewed from the drive side. Pump designation: first number indicates the capacity, m3/h; the second number indicates the head, kgf/cm2.
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
Applications: Designed for delivering treated water (feedwater) at the pumping temperature of up to 438K (165C) into the fossil-fueled stationary boilers with absolute steam pressure of maximum 13.7 MPa (140 kgf/cm2). Capacity, Q = 100 m3/h, Head, H = 580 m, Speed of rotation, 2970 rpm, NPSHr = 4 m. The pump units shall be rigidly anchored to the foundation, and piping shall be also rigidly connected to the pumps. The pumps are motor-driven horizontal, centreline-supported, between-bearings multistage ring-section centrifugal pumps with single flow impeller arrangement. The pump casing comprises a suction casing, a delivery casing and a set of stage casings, which are concentrically aligned with respect to each other on rabbeted fits and are bolted together with tie bolts. Diffusers are built in the stage casings and delivery casing. The suction and delivery casings have flanged suction and discharge pump nozzles respectively, which are oriented vertically to the top. The rotor axial thrust is automatically balanced with a balance disc. In order to ensure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication. The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side.
Sunflower oil from the best sunflower varieties of the South of Ukraine. Refined and deodorized. Use: designated for a direct food consumption and food production. REFINED SUNFLOWER OIL Type: Refined, Winterized, Deodorized, Bleached. Standards: Conform to European Norm CEN/TC 307 or Standard of production country, and International Standard Organization ISO/TC 34/SC11, International Food Standards of United Nations and FAO Codex Alimentarius CODEX STAN 210-1999 Standard for Named Vegetable Oils. Quality: Fit for human consumption, free from foreign matter, any other oil or animal fats. Color: Light yellow, clear and transparent. Odor: Neutral odor, without an artificial odor additive. Visibility: Without any deposition and blurriness. Taste: Neutral, without an artificial taste, free from rancidity or any strange or bad taste and smell. Shelf Life: 24 months Physical and Chemical Analysis Values: (The values may vary within standards) Acidity (Free Fatty Acid): 0,3 maximum. Peroxide Value (meq O2 / kg Oil) at End of Expiry Date: 8,0 maximum. Peroxide Value (meq O2 / kg Oil) at Production Date: 1,0 maximum. Iodine Value (WIJS): 118 - 141 Moisture and Volatile Matter (% at 105oC): 0,2 maximum. Saponification Value (mg KOH / g oil): 188 - 194 Unsaponifiable Substances (%): 1,5 maximum. Insoluble Substances in Fat Solvent (%): 0,05 maximum. Refractive Index (at 40oC): 1,461 - 1,468 Specific Weight (g at 20oC): 0,910 - 0,925 Soap Content (%): 0,005 maximum. Amount of Phosphorous: Maximum 5 ppm. Remains of Solvent: None. Heavy Metal Analysis: Mercury (Hg): 0,02 mg / kg maximum. Cadmium (Cd): 0,02 mg / kg maximum. Arsenic (As): 0,05 mg / kg maximum. Copper (Cu): 0,1 mg / kg maximum. Lead (Pb): 0,1 mg / kg maximum. Iron (Fe): 1,5 mg / kg maximum. Zinc (Zn): 5 mg / kg maximum. Nutrition Facts in 100 gram: Energy: 829 kcal / 3400 kjoule Total Fats: 100 g Protein: 0 g Carbohydrate: 0 g Cholesterol: 0 g Vitamine: The product does not contain any added vitamine. GMO: Free from Genetically Modified Organisms (GMO). X-Ray Contamination Level: Meets requirements Euratom 3954 / 87. Halal Nutrition (Islam): Meets requirements. Kosher Meats (Jewish): Meets requirements. Vegan or Full Vegetarian: Meets requirements. Lacto Vegetarian: Meets requirements. Ovo - Lacto (Egg - Milk) Vegetarian: Meets requirements. PRODUCT NO GMO
D 2500-62-2-S UKhL4 ( 2500-62-2- 4) make Between-Bearings Double Flow Axially Split Pumps Pump parameters: Capacity, Q = 2500 m3/hr, Head, H = 62 m, Speed of rotation 980 RPM, NPSHr = 6 m/ Applications: Designed for the supply of water to industrial plants and communities. They are used also for agricultural land irrigation and drainage. Design: The pump units shall be rigidly anchored to the foundation, and piping shall be rigidly connected to the pumps. The pumps are electrically driven horizontal, foot-mounted, single-stage, axially split volute casing centrifugal pumps with a double entry radial impeller. The pump casing is a locating part of the pumps, which incorporates a lower and an upper casing halves bolted together by means of studs. Pump shaft sealing is by means of packed glands. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side. Upon the Customer request, the pumps may be supplied with a rotor for reverse rotation.
HOT-H stainless steel orthopedic and neurosurgery surgical operating table HOT-H multi-purpose operation table is an improvement product developed on the basis of 3008 series head-manipulation type multipurpose operation table and is for use of general operations in chest surgery, department of ophthalmology, department of otolaryngology, department of obstetrics and gynecology, urological department etc. As a unit of non electronic control system comprehensive operation equipment, it is convenient and flexible to operate. PRODUCT'S FEATURES: 1) A multifunctional operation table that applies to various surgical operations and examinations. 2) Adoption of a foot hydraulic pump that integrates oil tank of oil pump and drive mechanism. 3) Adoption of the imported cylinder that controls actions of table top and is convenient to operate and reliable to locate. 4) Compact and rational structure and originate model. 5) Built-in waist bridge is convenient to use. 6) Both guide rail and accessories are made of corrosion resistant stainless steel. 7) All mattresses use the new-style materials that are acid and alkali resistant and disinfection durable. good price
Ca< 0.213%, Pb< 0.096 %, Al< 0.090 %, K< 0.064 %, Na< 0.021 %, Ag< 0.021%, Fe< 0.019 %, Mg< 0.009%, P< 0.008 %, Cr< 0.002 %, As< 0.0002 %, B < 0.005* %, Bi < 0.005%, Cd< 0.005%, Co< 0.005%, Cr < 0.005%, Cu< 0.005%, Li < 0.005%, Mn< 0.005%, Mo< 0.005%, Nb < 0.005%, Ni < 0.005%, Sb < 0.005%, Sn < 0.005%, Ba < 0.005%, Sr < 0.005%, Ta< 0.005%, Te< 0.005%, Ti< 0.005%, V< 0.005%, W< 0.005%, Zn< 0.005%, Zr< 0.005%, Hg< 0.0001%, Tl< 0.0001%, Be< 0.0001%, Se< 0.0001%, Si-0%
1) Drive mode: Hydraulic drive with 2 individual hydraulic pump 2) Max. pulling and clamping force: 10T 3) Motor power: 3KW2 4) Pulling speed: 0.1m 1m/min 5) Heating system: 6 heating zones with heating blocks (option: heating plate) 6) Heating temperature range: 0-300 with control precision ±1 7) Max. Clamping Space: 600mm 300mm 8) Clamping method: from up to down 9) Max hydraulic system pressure: 10Mpa, with cylinder diameter 110mm 10) Electric control: PLC station with English text display which enjoys the function of speed indication. 11) Linear guide with stainless steel dust cover. 12) Overall dimensions: 10m(length) 0.9m(width) 1.6m(height)
Currently, the most common source of copper ore is the mineral chalcopyrite (CuFeS2), which accounts for about 50% of copper production. The focus of this article is on the process of copper extraction from chalcopyrite ore into pure metal. Processes for other minerals are mentioned. Owing to our wide experience of more than one decade in this domain, we are noted entity engaged in importing, exporting supreme quality Copper Ore. The combo of its abundance and physical properties make our offered ore is more valuable in the national as well as international market. Moreover, this ore is available with us at the most competitive rates. Copper(Cu), % 25.0 Min Lead(Pb), % 5.00 Max Cadmium(Cd), % 0.05 Max Mercury(Hg), % 0.01 Max Flourine(F), % 0.10 Max Arsenic(As), % 0.50 Max Moisture(H2O), % 5.0 Max Size 0-100mm Features: Odorless High density Effectiveness General specifications of copper ore DETERMINATION (mass%) Copper 40.01% Total iron as Fe 21.60% Silicon as Si0 20.24% Total Sulphur as S 17.10% Zinc as Zn 0.01% Moisture or 105 C 1.14%
Key features of the production line: Additional unit for rolling specially for producing taralli Replaceable dies for different diameters of product Option for additional equipment: - dough feeding into extruder automatic system - sprinkler unite (poppy, sesame ect.) - automatic stacking system on baking trays; Design of lines can be developed according to customers production premises Equipment set of the line - - inclined conveyor; - dough ribbon extruder; - multiroller; - feeding conveyor with knife mechanism; - forming machine; - machine for trays feeding; - unite for dough base stacking; - gilliotine. Capacity - 100-300 kg/h Raw material: flour Energy source for oven electricity All components contacting with product are made of stainless steel AISI 304 Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
Key features of the production line: Option to work with biscuit dough and other kind of dough Replaceable knife for different forms and dimension of products Option for add addition equipment: - Automatic feeding of dough into extruder - Offcuts return into extruder - Automatic stacker on baking trays - Double calibrator for thin dough; Design of lines can be developed according to customerâ??s production premises . Equipment set of the line: - extruder; - flour duster; - rolling-pin with dough; - calibrator; - needle drums; - circular knives for slitting; - knife mechanism; - conveyor for offcuts removal; - horizontal knife; - stacker on trays. Capacity - 100 - 250 kg/h Raw materials: flour Energy source for oven electricity All components contacting with product are made of stainless steel AISI 304 Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
Key features of the production line: Automatic washing of divider; Option for add additional equipment: - Automatic feeding of dough into bunker of extruder -Stacker for stacking for grouping products in a stacks; Different recipe; Design of lines can be developed according to customerâ??s production premises Equipment set of the line: - dough divider; - press; - feeding conveyor; - two tired tunnel oven; - cooling conveyor; - inclined conveyor; - two rowed stacker. Capacity - 100 - 250 kg/h Raw materials: flour Energy source for oven - electricity All components contacting with product are made of stainless steel AISI 304 Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
Key features of the production line: Automatic washing of divider; Option for add additional equipment: - Automatic feeding of dough into bunker of extruder -Stacker for stacking for grouping products in a stacks; Different recipe; Design of lines can be developed according to customerâ??s production premises Equipment set of the line: - dough divider; - press; - feeding conveyor; - two tired tunnel oven; - cooling conveyor; - inclined conveyor; - two rowed stacker. Capacity - 100 - 250 kg/h Raw materials: flour Energy source for oven - electricity All components contacting with product are made of stainless steel AISI 304 Drives and components are made in Europe Control system is carried out with controller and TOUCHSCREEN
