DESCRIPTION AS-650 is a flexible, two-components aromatic polyurethane protective coating. It can be used on various substrates for coating and protecting purpose, especially with the excellent adhesion ability with polyurea and polyurethane layers. It cures fast providing quick tack free time (1-2hours), allowing most projects to be completed within one day. CHARATERISTIC Fast drying and fast curing Brushable Solvent free Abrasion and mechanical stress resistant Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etcâ?¦) APPLICATION AREAS Parking areas, warehouse ramps, garages, terraces Outdoor and indoor stores, industrial shop floors Outdoor laundries, gas station, etc
Description CC-105HD Duraflex is one component, eco-friendly, water-based topcoat membrane. Feature Resistant to exposed sunlight and chemicals. When applied, it forms as seamless membrane without joints. Product keeps its mechanical features over a temperature span of 40 to 90 Use Area Roof terraces balconies and verandas. Industrial floor coatings. Stones, marble and ceramic surfaces Coverage. Consumption of each layer: 0.1.5-0.2.5 kg/m2. Minimum two coats should be applied. Total consumption: approx. 0.3-0.5 kg/m2. Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded.
DESCRIPTION AS-600 is a high-solid, solvent-based polyurea coating. Itâ??s also formulated with pure aliphatic resin and contains UV filters, remaining unaffected by the sunlight and adverse weather conditions. It cures fast providing quick tack free time (1-2 hours), allowing most projects to be completed within one day. CHARATERISTIC * Fast drying and fast curing * Brushable * Abrasion and mechanical stress resistant * Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etc) APPLICATION AREAS * Warehouse ramps, garages, terraces, parking areas * Outdoor and indoor stores, industrial shop floors * Outdoor laundries, gas station, etc..
CC-403 Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and aggregate to produce epoxy mortars of various consistencies. Ideal for : bonding, sealing, priming, coating and grouting. May be used on vertical or horizontal applications as structural epoxy adhesive paste and filler. CC-403 is also used as a primer for Epilox floor coatings and toppings as well as Epilox mortars. FEATURES AND BENEFITS 100% solids epoxy Solvent free Low VOC High tensile and compressive strength Bonds to damp concrete High mechanical strength Excellent adhesion to most substrates Cures at temperature down to 5Ã??C High chemical resistance Unfilled system Allows for mortars and grouts to be mixed to any desirable consistency Typically 3-4 times stronger than typical concrete Complies with AS4020 potable water Australian Made Convenient mix ratio- ( 2 parts Resin- 1 part Hardener ).
DESCRIPTION CC-404 is a two component, high performance, pre filled epoxy grout , suitable for use as a pourable or fluid grouting material. Aftek F4 and F6 fillers may be added to produce a trowellable high build mortar or a pourable flowable grout. FEATURES â?? High flow properties â?? Bonds to damp substrates â?? Rapid hardening and strength gain â?? High chemical resistance â?? Pre-measured kits make for ease of use â?? High tensile and compressive strength â?? 100% solid epoxy â?? Excellent adhesion to most substrates â?? Cures at temperatures down to 5oC â?? Negligible shrinkage â?? High mechanical strength â?? Solvent free High early strength PACKAGING CC-404 is available in 3 litre and 15 litre kits
DESCRIPTION * Environmental friendly water-based paints,safe and non-toxic. * Suitable for indoor/outdoor excel wall. * High performance waterproofing application, excellent permeability, and corrosion resisting. * Resist to mold,weather and chemical resistance. * Fast drying and no irritating smell, Expoy is substituted by CC105. * Apply in multiple layers with smooth surfaces. APPLICATIONS * Floor or excel wall fixing on Parking Lot,Mall,and home used. * Industrial factory and white room. * Excellent permeability and enhanced water resistance, Can be used in wet and fouling protection areas. * Used as waterproofing coating and burnish surface coating. PACKING AND STORAGES * 20 kg/pail * The amount of raw 0.1~0.15 kg/m2 (twice usage) * keep the storage environment well ventilated area. Less than 25 degrees can be stored for 6 months.
DESCRIPTION CC-604 is two components of water based surface paint, composed from water based of liquid epoxy resin and hardener and special pigment. APPLICATION 1. Waterproof of concrete wall, resist to mold and decorative coating. 2. Highly resist to chemicals in non-circulated places. 3. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium. CHARATERISTIC 1. It is water based paint, and dilute by water, but its films strong after hard is not less than solvent based epoxy resin. 2. With good light resist quality, uneasy to become powder or change color, suitable for the environment with highly hygienic request. 3. Good to resist the radiation, can be used for the concrete wall and floor in the nuclear power factory. 4. Good adhesion to the moisture floor, can take as the primer for non-solvent or solvent based epoxy resin.
Description CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface. Feature Resistant to UV, exposed sunlight and chemicals When applied, it forms as seamless membrane without joints Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius Use Area Roof terraces balconies and verandas Industrial floor coatings Stadium, car parks Stones, marble and ceramic surfaces Coverage Consumption of each layer: 0.1-0.15 kg/m2 Minimum two coats should be applied Total consumption: approx. 0.2-0.3 kg/m2 Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded
Full Cream Milk Powder (Whole Milk Powder) Physical and chemical characteristics Colorwhite to creamy-white Taste/flavorfresh milk Moisture. Max4.0% Fat content. Min26% Protein content. Min25% Lactose contentApprox. 37% Titratable acidity. Max17 Insolubility index (cm3 of wet sediment). Max0.5 Total plate count. Max50,000 per gram Coliformabsent in 0.1 g Salmonellaabsent in 25 g Antibioticsabsent Scorched particlesdisc �. B Package: 4-ply paper bag with 1-ply inner polyethylene bag of minimum 0.075 mm thickness. The inner bag is independent and separate from the outer one. Weight: Net 25.0 kg; Gross 25.4 kg. Term of storage: 18 months at temperatures 0�+10°С and relative humidity up to 85%. Origin: Ukraine
DESCRIPTION Hydrostatic press stone filmless maintenance agent is a maintenance hybrid comprised of a special kind of Oligomer Silsesquiloxane mixed in a water-based solution, formulated with powerful surfactants attributing to its excellent-resistance properties and a non-yellowing methyl silane hybrid, which reacts with the moisture and CO2 in the air, forming a nonsolvent based resin that penetrates into the substrate heightening its water proofing ability. Its ability to penetrate deep into the concrete, as deep as 3~5m/m, distinguishes it from other products on the market. Moreover, it can cause a chemical reaction with alkaline materials that produces crystals inside the concrete, that can fill and block the micro-vein within the concrete so as to reach the waterproof effect in depth; thus, the longevity of the building can be extended. APPLICATION Water, anti-pollutants and anti-weathering resistance for various surfaces such as: tiles, gaps between tiles, terra cotta, calcium silicate board , plasterboard ,bricks,concrete, natural and process stone, stone carving, stone washing, stone smoothening, stone cutting,sidewalks, parking plywood. ADVANTAGES * Highly active molecule that is eco-friendly, water-based and inorganic produces strong adhesive to the substrate after chemical cross-linking. * High permeability and excellent durability. * Non-yellowing, no stain contaminated, dirt can be easily washed off with water from rain or washing walls. * Excellent water repellent ability (the so-called Lotus effect) can effectively prevent from water permeating. * It is suggested to apply new coat regularly every three years; thus it can continue to maintain water-repellent and anti-pollutant functions.
DEACRIPTION Rockflex-BRH is a specially modified styrene butadiene rubber emulsion with widely applicable for use in repair and general purpose mortars and overlay applications. Also, it is likely to be applicable to floors, bridge deck, surfacing and compounds for repairs, road of concrete structures. CHARATERISTICS * Increase the performance of bonding agent for old and new concrete. * Improving tensile and flexural properties of repair mortar. * Reduces water penetration and shrinkage. * Repair damaged, sprawled concrete and filling of cracks. * Better abrasion resistance and chemical resistance of cement screeds. * Suitable for waterproofing and laying floor screeds. * Strength to adhere concrete, masonry surfaces. APPLICATION PROCEDURE * Substrate should be cleaned and free of dust. Use wire brush to remove loose material. * Clean surface with water to remove loose particles and dust before primer application. PRIMER COAT Apply directly or mix cement and Rockflex-BRH in the ratio of 2:1. Apply as a slurry coat before placing polymer modified primer application.
DESCRIPTION CC-610S Modified Polyurethane weather-shield is a two component with great bonding strength on materials that are hard to adhere. CHARATERISTIC More suitable coating on surface as soft plastic, PVC, ABS, PCâ?¦..etc. Non-yellowish and excellent gloss and color retention after exposure in outdoor. Resist from most chemical products Coating oil or color changing for tiles, imitation rocks. Glass-painting and painting for iron, zinc plate, and stainless steel High weather resistance and high gloss corrosion prevention paint for cement, stones, asbestos, bricks, wooden materials, and bamboo wood. NOTES Please mix and stir well before using Please make sure the lid is closed tightly. Please keep the surface free of dust, loose or paint before painting The tools are washable by solvents after application. Avoid direct sunlight or high temperature environment to ensure excellent product quality. Keep the storage environment well ventilated and stay away from flammable when applying paints. The actual volume application depends on the surface condition.
DESCRIPTION CC-700 is a 100% solid content, two components, high performance polyurea elastomer based on aromatic MDI and amine-terminate Polyether. It displays extremely fast cure times about 10-100 seconds and shrinkage resistance which also provides excellent acid, alkali and chemical resistance. WORKING PROCEDURE 1. Surface preparation - please make sure the surface in clean, dry, sound and smooth condition. 2. Crack repair â?? Epoxy resin mortar, Epoxy resin repair material, single component polyurethane sealant and single component polyurethane waterproofing material. 3. Primer 4. Application â?? 2.1-2.5kg per 2mm thickness. (1.3kg of CC-700 could be applied 1mm thick) 5. Top coat CHARATERISTIC 1. Well abrasion resistance, flexibility and elasticity. 2. Corrosion resistance 3. No building restriction, wide working temperature range. None sensitive to temperature and humidity, it can be harden at 5â??. It can be applied in -40â?? ~ 120â??. 4. Environmental protection and high solid content. 5. Non-sagging and seamless, can be used over flat or vertical surface at the same time. 6. Excellent adhesion to a wide range of substrates.
DESCRIPTION CC-200 is a indoor, high fluidity, rapid strength and leveling material. It still has high bonding,low shrinkage, low water absorption, acid resistance, alkyl resistance and chemical resistance. It special use for fast repairing, putty and leveling for epoxy coating. APPLICATION Floor fixing on parking garage, factory, and warehouse. Leveling before epoxy coating. Basic layer for non natural paint. Bec ause of the early strength and low moisture content, CC 200 has widely application. Contact out agent when you have doubt on CC 200. ADVANTAGES 1. Curing and enhancing are fast and rapid below 25 mins. High strength and low water absorption/ content could be reached after curing. 2. Good acid and alkyl resistance. 3. Good wear resistance, high compressive strength, leveling and anti cracking. PREPARE TO USE 1. Clean with vacuum to ensure the surface dustless. 2. Working site is free from dust, sand, oil, and loose. a). Crack and Joint Treatment b). File on the crack, open a width of 2 3 cm depth of 1 cm or more groove joints and clean up dust and loose. c). At the same time taking CC 200 mortar, filled in and up the crack and sizing 1 2 times primer after 2 4 hours. 4. Shorter wor king hours to achieve saving time, fast leveling and convenience work.
Description 1. Tough film and good adhesion on the concrete, able to penetrate into concrete. 2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties. 3. Good resistance to impact and abrasion. 4. Easy application , drying fast. Prepare to use 1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity. 2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application. 3. Two packs product, must be used completely during the duration of its pot life. 4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??. 5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion. 6. Keep away from heat, sparks and flame. 7. Stored with good ventilation. 8. Keep adequate ventilation during application. 9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying. **The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel. Color : Clear Drying time : Tack-free : 2 hours Hardness : 8 hours Full cure : 7 days (grease)
Introduction Bentonite Mat are consisting of three different layers supported by geotextiles and/or geomembranes, mechanically held together by needling, stitching, or chemical adhesives. A Bentonite Mat construction would consist of two layers of Bentonite Mat stitched together enclosing a layer of natural or processed sodium bentonite. The engineering function of a Bentonite Mat is containment as a hydraulic barrier to water, leachate or other liquids and sometimes gases. Typical Applications Includes Ponds and stormwater impoundments: Bentonite Mat are widely implied in sewage reservoir, storage ponds, and regular reservoir. The Bentonite Mat does not require specialized machine nor skilled workers, which makes it a great material for ecological pool protection. Landfill liner : Bentonite Mat can replace the clay layer of geosynthetic membrane compound system, offering less systematic leakage rate. For a better result,combining with geosynthetic membrane is recommended. By doing so, when the geomembrane is compromised, the Bentonite Mat can still work for its purpose. Anti-leakage of gas or oil depot:Due to the ease of application and great toughness, it is the most economic and reliable choice of leakage protection for oil or gas depot. Landfill cap: Using the Bentonite Mat are widely adopted in different countries, for the damage and crack effect of uneven subsidence, desiccations, and dampness are drastically less than ordinary clay layer. Hence, the Bentonite Mat are extraordinary suitable for landfill cap. Underground project waterproofing: The protruding thin fibers of Bentonite Mat surface can lodge in concrete and served as an anchor. When the subsidence occurs, the small anchors would prevent the Bentonite Mat and structure from forming a water intrusion interface.
DESCRIPION FR-48 is solvent-less moisture cure type, single-component flame retardant RTV silicone product. It is suggested for use in applications requiring neutral cure, fast cure and excellent adhesion. FEATURES * Sealing of electrical components * Industrial plastic sealing, electrical insulation properties. * Low flammability â?? has a UL rating of V-0(1) * Primerless adhesion to plastics and metals * Excellent resistance to moisture, dust, UV and ozone. * Fast room temperature curing * High temperature resistance (Flexible from -60â?? to 200â?? continuous operation and 260â?? for short periods) COMPATIBILITY FR-48 contamination -free silicone sealant shows excellent adhesion for Al panel, stone, glass, PVC, or wood. As new construction materials appear and the material surface treatment method varies, some materials may cause poor adhesion or discoloration. FR-48 contamination-free silicone sealant is chemically stabilized, maintains a uniform paste shape all the time, and may be workable at the temperature range of -25â??~50â?? unless there is moisture. LIMITATION * For structural construction * At completely enclosed space * On frosty or wet target surfaces * For the parts with potential continuous flooding * In the internal fire area * For materials where oil, plasticizer, or other solvent is leaking. * For polypropylene, polyethylene, polycarbonate, or Teflon material. * At horizontal : joints potential physical friction * For the parts requiring painting on the sealant * For materials with surface temperature over 50â?? PACKING 300ml Cartridge COLOR White and grey STORAGE Shelf life is 1 year if stored unpacked in cool and dry condition away from direct sunlight.
Coating Chemicals..
Silicones in primary forms.
Silica Like Fumed Silica Precipitated Silica..
