Tetrahydrofuran.
Pump.
The size and length of meat can be cut as you wish. Meat from Chilled to Frozen are sliceable. Excellent operation ability by High-Speed processing. Inter-Lock Structure by Sensor, secure and safety for operation. Processing dimensions are various by exchange of the substitute frame. (Substitute Frame is selling separately)
Continuous Feeding! Powerful Slice at max. 300slices/min. 1. Circular blade provides uniform slice even high speed slicing. 2. Machine durability and yield improved. 3. Automatic thickness adjustment for face plate is standard. 4. Each parts around direct meat contact area are removable easily without using any tools.
Completely filled of resin. Removable power cable
The Wilo-Actun OPTI HS is equipped with a helical rotor that moves within a double helix rubber stator. The rotor is made of AISI 316 stainless steel and coated with a hard chrome surface. During operation, the rotor moves on the rubber surface and it’ s lubricated by the pumped water. The flow rate is directly proportional to pump speed while the pressure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump provides high head even at low rpm, ensuring water on surface even with very low available power or low irradiation. In addition, the helical rotor pumps feature higher hydraulic efficiency than centrifugal pumps of same flow. This saves in the number of PV panels necessary for the application. Permanent magnets motor The Wilo-Actun OPTI HS is equipped with AC permanent magnets motor. The rotor uses Neodymium magnets coated with thin layers of Copper and Nickel, to ensure, in addition to superior magnetic performance, greater reliability and durability. High motor efficiency and high starting torque make pump moving even in low light conditions. The integrated inverter module realizes the conversion from DC energy into useful electrical energy to drive the engine efficiently and, at the same time, adjusts the pump speed in relation to available irradiation, maximizing the power extracted (MPPT). Over-current, over-temperature, lack of water protections are integrated on-board.
Product Description Name: KISHO X-02 Maintain agent for glass coating layer Dosage: 25 ml per pallet Price: one liter to do 40 car or so product ingredient: silicone resin Product Feature 1 After plating the crystal construction, in the initial hardening of the film after the use of crystal curing agent, can effectively avoid Avoid the rain, and play a role in the protection film plated crystal hardening stage; 2 After plating crystal construction, brightness and water allocation effect will be reduced according to the use of the car,When can the construction plated crystal curing agent, to supplement the paint and brightness of the water repellent effect. Product Specification / Models Name: KISHO X-02 Maintain agent for glass coating layer Dosage: 25 ml per pallet Application After wiping the body, the plating crystal curing agent is sprayed onto the wet towel to dry the wet towel.Alternating vertical coating, and then dry towel polishing, complete a layout of the construction Other Information To avoid high temperature and frozen storage; avoid direct sunlight; please do not put Save in the vehicle.
Product Description Performance: water skiing coating agent, non crystalline products, silicon and glaze perfect combination, can improve the brightness of the car paint, strong pollution resistance, allow the paint becomes particularly smooth, splashing effect is very good. Construction technical requirements, anyone can operate suggestions for no crystalline plating paint. In Japan lasts up to six months or so Product Feature Performance: water skiing coating agent, non crystalline products, silicon and glaze perfect combination, can improve the brightness of the car paint, strong pollution resistance, allow the paint becomes particularly smooth, splashing effect is very good. Construction technical requirements, anyone can operate suggestions for no crystalline plating paint. In Japan lasts up to six months or so Product Specification / Models Name: X-01 coating agent Dosage: 25 ml per pallet Price: one liter to do 40 cars or so Application clean the paint, dry the body, superfine fiber towels soaked twist dry, the Meiji Japanese car 2 spray on the towel 4 - 5 times (about half a hood amount), smear should be according to first transverse and longitudinal alternating direction method is uniform linear smear, smear after a board, immediately use the stem of a microfiber towel body can polish. The next day will show very good brightness and splashing Other Information This product operation is particularly simple, the effect is very significant, more diversified sales methods, not only the professional construction of the store can be used, individual owners can also be used as the sales target
Product Description Combined different series of products can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-701 and Si-901 double film glass coating overlay, protects vehicle finish with excellent and extended durability, consolidating top-level 3D glass coating film, which is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models 1. 1 Si-701 glass coating agent (30ml); 2. 1 Si-901 glass coating agent (30ml); 3. 1 X-03 protectant (30ml); 4. 2 Glass coating sponges; 5. 1 Manual Application Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary Other Information After completion of whole vehicle Si-901 glass coating practice, postpone for above 2 hours to carry out X-03 protectant practice; 1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.; 2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film. Notice: Do not use excessive quantity leading to nonuniform practice
Product Description Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Feature .Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment Product Specification / Models 1. 5 Si-02 wheel coating agents (10 ml); 2. 1 Manual. Application Si-02 wheel glass coating practice method 1. Completely clear fouling attached on the wheel hub, and use a air gun to blow off moisture until it is completely dry; 2. Drip Si-02 wheel glass coating agent on coating cloth, and smear the wheel uniformly, notice not to smear repeatedly (repeated smearing leads to visible traces); 3. Keep still standing above 5 hours after smearing, or use a hot lamp or hot blast to expedite hardening rate of the glass coating film Other Information Note 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice.
Product Description The Si-701 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties Product Feature , recommended to combine with Si-901 practice to achieve premium coating overlay, which consolidate top-level 3D glass coating film whilst protecting vehicle finish with excellent and extended durability. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models KISHO Si-701 [Specifications]1L,2L,4L,17L [Ingredients]SiO2 [Specifications]1L,2L,4L,17L [Dosage]One liter liquid construction 34 cars, each car was 30ml Application first, degreasing secondly,swearing thirdly. wipe forth. finish, if you want to know the details to use the glass coating, please contact us Other Information Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness.
Product Description The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties Product Feature The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling propertiesrecommended to combine with Si-901 practice to achieve premium coating overlay, which consolidate top-level 3D glass coating film whilst protecting vehicle finish with excellent and extended durability. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models KISHO Si-901 [Specifications]1L,2L,4L,17L [Ingredients]SiO2 [Specifications]1L,2L,4L,17L [Dosage]One liter liquid construction 34 cars, each car was 30ml Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models i-811 Kisho Glass Coating [Ingredients]SiO2 [Specifications]1L,2L,4L,17L Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models 1. 1 Si-811 glass coating agent (30ml); 2. 1 X-03 protectant (30ml); 3. 1 Glass coating sponge; 4. 1 Manual Application Pre-practice treatment Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary Other Information 1. This product is fast try, please avoid practice under burning sun, otherwise wiping would be impeded; 2. Avoid practice in temperature environment under 10; 3. Please carry out practice under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate leading to wiping obstruction; 4. Please completely clear fouling attached on vehicle body and carry out degreasing before practice; 5. Please read practice manual in details and follow practice procedures therein
Product Description This product is fluoride-containing coating film product, used to smear on glass surface to form water repellency film to enhance glass self-cleanness, which can improve visibility in rainy weather and enhance safety driving. Product Feature This product is fluoride-containing coating film product, used to smear on glass surface to form water repellency film to enhance glass self-cleanness, which can improve visibility in rainy weather and enhance safety driving. Product Specification / Models 1. 5 G-01 window coating agents (20ml); 2. 5 Coating film sponges; 3. 5 Coating cloths; 4. 1 Manual. Application 1. Completely clear fouling and oil-film attached on window, and use a air gun to blow off moisture until it is completely dry; 2. Drip G-01 window coating agent on sponge wrapping the coating cloth for 7-10 drops, smear it on window uniformly with an alternating method of first lateral and then vertical; 3. Postpone for 5 min, then use a dry towel to wipe the window with polishing brightness to complete. Other Information 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice
Product Description Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Feature Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Specification / Models Kisho Si-02 Auto Wheel Coating [Ingredients] polysiloxane [Specifications] 1L,2L,4L,17L [Dosage] One liter liquid construction 100 cars, each car was 10ml Application Si-02 wheel glass coating practice method 1. Completely clear fouling attached on the wheel hub, and use a air gun to blow off moisture until it is completely dry; 2. Drip Si-02 wheel glass coating agent on coating cloth, and smear the wheel uniformly, notice not to smear repeatedly (repeated smearing leads to visible traces); 3. Keep still standing above 5 hours after smearing, or use a hot lamp or hot blast to expedite hardening rate of the glass coating film. Other Information 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice.
Product Description Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice Product Feature Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice Product Specification / Models BOTTLE:1L 5L 10L Application 1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.; 2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film. Notice: Do not use excessive quantity leading to nonuniform practice. Other Information 1. Avoid practice under burning sun; 2. Avoid practice in temperature environment under 10; 3. Please carry out practice under complete cool-off state of the vehicle body; 4. After glass coating practice, postpone for above 2 hours to exercise subsequent X-03 protectant practice; 5. Upon later maintenance after 3-6 months, please rinse the vehicle body clean and blow off the moisture using a air gun; 6. Please read practice manual in details and follow practice procedures therein.
Sandal injection style product, capacity sandal shoe.
negotiation Country of origin China Quantity 700kg/month Contract 12 months (extension possible)
Used cloths, used shoes and used bags.
