Product Description
Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice
Product Feature
Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice
Product Specification / Models
BOTTLE:1L
5L
10L
Application
1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.;
2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete;
3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film.
Notice: Do not use excessive quantity leading to nonuniform practice.
Other Information
1. Avoid practice under burning sun;
2. Avoid practice in temperature environment under 10;
3. Please carry out practice under complete cool-off state of the vehicle body;
4. After glass coating practice, postpone for above 2 hours to exercise subsequent X-03 protectant practice;
5. Upon later maintenance after 3-6 months, please rinse the vehicle body clean and blow off the moisture using a air gun;
6. Please read practice manual in details and follow practice procedures therein.
Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.
Commodity: Sodium Sulphate anhydrous Product Nature Molecular formula: Na2SO4 Molecular weight: 142.04 Property: white granular crystal or powder Use As filler of detergent, the making of sodium sulphide, water glass, or used in papermaking, glass, dye and used as filler, dyeing auxiliary, laxative, antidote, t also can be used in fiber, leather, metallurgy, enamel and soap. Specifications Item GB6009-2003 Type First grade Result of common product Result of neutral product Na2SO4 99.0 99.20 99 40 Water insoluble matter %0.05 0.02 03 Ca & Mg %(Mg) 0.15 0.02 02 Chloride %(Cl) 0.35 0.23 20 (Fe) 0.002 0.0001 0001 Moisture % 0.20 0.02 02 Whiteness % 82 88 85 Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Commodity:Sodium sulfite Molecular Formula: Na2SO3 Molecule Weight: 126.04 Appearance: white or light yellow crystalline powder Item Value Top-grade First grade Qualified product sodium sulfite (Na2SO3),% 98.0, 96.0, 93.0 Fe,% 0.003 0.005 0.02 water-Insoluble ,% water-Insoluble ,% 0.02, 0.03, 0.05 Free alkali(as Na2SO3),% 0.10, 0.40, 0.80 Sulfate(as Na2SO4),% 2.5 Chloride(as NaCl),% 0.10 Uses: used in leather and tannage, plant bleaching agent, reductant Packing: in polythene plastic bag with a polypropylene overbag, paper-plastic composite bag, kraft bag, etc. Net weight: 25,50,1000kilograms per bag or following your demand.
Commodity: Calcium carbide Molecular formula:CaC2 Molecule Weight: 64.10 H.S code:28491000 CAS: 75-20-7 UN NO.1402 HAZARD CLASS: 4.3 Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide. Appearance: Grey, black solid, purple when its purity is more than 90%. Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm Package: Net in 100kg or 50kg new iron drums with nitrogen. Specification: GB10665-2004 Specification Superfine Grade First Grade Second Grade Gas yield(L/kg)L/kg 305 295-305 285-295 PH3 content in acetylene (PH3%) 0.06 0.08 0.08 H2S content in acetylene (H2S%) 0.1 0.1 0.1 Loading weight in 1 x 20fcl:22.5mt
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Commodity: Calcium chloride Molecular formula CaCl2 H.S code 28272000 Product feature Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, Specifications: Analysis Item Standard Calcium chloride (CaCl2) 74%min,77% min,94%min Total Chlorinated Alkali: (NaCl) 5.0%max Magnesium Chloride(MgCl2) 0.5%max Insoluble matter in water 0.25%max Calcium Sulfate (CaSO4): 0.2%max Ferric Oxide (Fe2O3) 0.025%max Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max Application Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry. Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped Means of transportation :in containers or by bulk vessel with large quantity
Product Description Performance: water skiing coating agent, non crystalline products, silicon and glaze perfect combination, can improve the brightness of the car paint, strong pollution resistance, allow the paint becomes particularly smooth, splashing effect is very good. Construction technical requirements, anyone can operate suggestions for no crystalline plating paint. In Japan lasts up to six months or so Product Feature Performance: water skiing coating agent, non crystalline products, silicon and glaze perfect combination, can improve the brightness of the car paint, strong pollution resistance, allow the paint becomes particularly smooth, splashing effect is very good. Construction technical requirements, anyone can operate suggestions for no crystalline plating paint. In Japan lasts up to six months or so Product Specification / Models Name: X-01 coating agent Dosage: 25 ml per pallet Price: one liter to do 40 cars or so Application clean the paint, dry the body, superfine fiber towels soaked twist dry, the Meiji Japanese car 2 spray on the towel 4 - 5 times (about half a hood amount), smear should be according to first transverse and longitudinal alternating direction method is uniform linear smear, smear after a board, immediately use the stem of a microfiber towel body can polish. The next day will show very good brightness and splashing Other Information This product operation is particularly simple, the effect is very significant, more diversified sales methods, not only the professional construction of the store can be used, individual owners can also be used as the sales target