The perforating unit is totally an independent group that allows to pre-cut different types of material as film air bubble film, plain pe films, foam, paper to desired intervals. The plant results ideal to put in line with other system as extruders, air bubble film machinery, flexography printing machine. The group, built in steel with auto-level supports, it is composed from a rubber cylinder with neutral movement for the control of the speed of the material, group of pre-cut endowed with brushless motor and cylinder with toothed blades, cylinder of compression brushed and motorization for regulation from keyboard (minimum interval of pre-cut 200mm). The cover protection and the electric plant are conforming to the safety norms ce. The plant can be completed with the trimming group. Contact us
The company manufactures: - Wires: a wide range of unipolar wires is used in products. Section goes from 0,09 mm2 to 50 mm2 and they are made of several materials like PVC, Teflon, AWG according to the UL-CSA, silicone with or without glass tubing. - Probes: temperature probes, Reeds or Hall effect wired probes or any kind of required wrapper like threaded bulbs, perforated bulbs, steel, brass, plastic bulbs, die-cast bulbs. The Company can also work on wrappers designed for a dedicated mould. - Power cables: the production also includes power cables with die-cast plugs/sockets of different types: Italy, Schuko, UK, IEC, Australia. - Cables: wirings with multipolar shielded and shieldless cables, for applications like data transmission, power and dynamic uses; standard wirings like Fror, PVC, LIYY, Silicone, Neoprene or custom-made wirings, according to particular applications . - Panelboards, according to customer’s plan. - Assemblings.
Attery charger due to battery Disconnection, smart charging system according to the discharge level of the battery, Short check of functions and times, option: custom-made colour and custom-made Logo and silk-screen printing, final acceptance test conforming to safety regulations, Charging with decreasing current (wa characteristic): 9÷11 h charging time, charging With decreasing current (wo - wa characteristic): 7÷8 h charging time, complete With mains and battery cables; assembly of plugs and battery connectors on request. Wa (din 41774): Charge at decreasing current with intervention of the Final charge at 2.40 v/cell, final charge with timed Control 9h / 11h, fixed charging time (equalization Charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: Each hour 5’ (repeated for 48 hours), calculation to Determine the size of suitable battery charge: 16a For every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a). Wo-wa: Charge at decreasing current with intervention of the Final charge at 2.42 v/cell, final charge with timed Control 7h / 8h, fixed charging time (equalization Charge excluded), equalization charge (week-end
REF 2012417 The Italian family conducted business produces and distributes travel articles since 1956. They are specialized in the production made in Italy of travel goods in aluminium, abs, combined aluminum and simile leather, polycarbonate, with a large range of types and colours. Functionality, resistance, easy handling and light weights are the main characteristics of the collections. The company produces innovative collections for Business traveling. All the business luggage, briefcases and other travel goods are created to satisfy the business needs. The series in contemporary design are characterized by high functionality, with comfy handle, useful compartments, practical pockets for documents and computer. A compact basic collection of Business guarantees safety and handiness for all practical purposes during the work days. Strict testing of all products is observed to assure using travel products of maximum standards. Since 2002 the Company is certified UNI EN ISO 9001:2008 attesting highest quality standards, in research, material, test circles and company operations. The Company wishes to get in touch with importers/wholesalers as well as representatives/agents from target countries which could be interested in importing and distributing the above products. Target Countries: USA, Mexico, Canada.
Semiautomatic filling machine stainless steel made, mounted on wheels. The unit has limited overall dimensions. â?¢ Linear filler with 2, 4 or 6 filling valves for gravity filling of all flat products as wine, spirits, juices, water... â?¢ Filling valves with diam. 15mm (smaller or larger valves are available on demand for special use) Simple adjustment of the filling levels inside the bottle by means of quick-insertion spacers Pneumatic bottle seats lifting with height adjustment to fit different bottles. The up / down timing of the bottle seats can be adjusted according to the volume of the bottle, by means of timers: This system allows to adjust the filling timing, once the bottles are filled up the bottle-seats are lowering down. The time can be reduced when filling small bottles, to increase the production output. Product infeed with electric valve in stainless steel controlled by measuring probes. Electrical control panel predisposed for controlling the pump for the product. Controls and protection, all complying with EEC regulations. Possibility to fill glass bottles from 0,375 to 1,5 litres (bottles samples to be provided for confirmation) Supply: electric power and compressed air. OUTPUT : approx 600 x 75cl bottles/hour
Icroprocessor control is Designed to optimize the charging cycles for any type of battery, single mains input Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output, Delta-star stray flux single-phase power transformer, tenvex copper windings with Double enamel insulation; class h; impregnated in autoclave with ecological epoxy Resins, with thermocouples for disconnection due to maximum temperature, singlephase Rectifier bridge with silicon diodes, natural cooling, with snubber protection, Mains input and d.C. Output polarized cables, modular installation on galvanized Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10, Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral 2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic Compatibility and ce marking, equalization charge timed, automatic start, automatic Disconnection of battery charger due to battery disconnection, smart charging system According to the discharge level of the battery, short check of functions and times, Option: custom-made colour and custom-made logo and silk-screen printing, final Acceptance test conforming to safety regulations, charging with decreasing current (wa characteristic): 9÷11 h charging time, charging with decreasing current (wo - Wa characteristic): 7÷8 h charging time, complete with mains and battery cables; Assembly of plugs and battery connectors on request.
REF. 2012202 The Company started to handbuild rowing and sailing boats used for fishing in 1849, basing the craft on the shape and form of the traditional Italian boat ''gozzo sorrentino''. Afterwards the boatyard was opened in 1983. Today, the Company is one of the most prestigious Italian sailing brands in the world, and it has a precise niche market among the lovers of luxury and exclusive boats, conjugating the old local tradition and the international modern class. The gozzos’ main characteristic is namely the double pointed hull with a very similar shape both in the bow and in the stern. The major innovative changes are the use of fiberglass for the hull while leaving all the other parts of the boat in wood and the keel which made possible to reach high speeds. The materials used for the furniture are extremely natural and classic, with a predominance of shiny and matt mahogany, Viennese straw and mirrored, chrome plated and steel hardware. The gozzos are finished with craftmade care, and, at the same time, provided with the most advanced structural elements. The products excel in terms of elegance, safety, performance, technology and comfort. All the boats are equipped with ARG anti - rolling system, which is a stabilization system to reduce the rolling effect of the waves. Matching the characteristic old style of the ancient boats with innovation, functional and aesthetic best solutions, a modern research department made up by designers, nautical engineers, architects and technicians, makes the boats some of the most innovative in the international nautical market. The Company wishes to get in touch with importers/wholesalers as well as representatives/agents from target countries which could be interested in importing and distributing the above products. Target Countries: United Arab Emirates, Brazil, Russia.
Noiseless and ecological electric vehicole/tractor. 16 Km/h. Direct use: you get on, drive and stop (movement dynamics). For all employees who move in a range greater than 100 mt. For quick repair service and transport of small-sized components. Average time saving of about 40 to 60 minutes per day. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - lightweight tubular plate traction - 105/125 Ah. - Built-in charger and automatic battery status. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft couplings with 6 quarries - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colors: white, red, green , yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. 10 Km/h. -offers two different advantages: it allows to move very quickly and transport up to 300 kg of materials by using a truck designed by us. Speedy, handy in narrow spaces, it spins around with the truck within a 200 cm radius allowing quick access to other departments. Quick repair and maintenance of big- sized and heavy materials (the truck is 120x80 cm with a carrying capacity of 300 kg). Allows to avoid using big and expensive vehicles to move small volumes of goods. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 123/143 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and charge indicator battery 24 volt 800 watt electric motor RR 1/10 - 24 volt electric motor permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. 2 Batteries 12 volt - tensile tubular plate - 102/157 Ah. - Built-in charger or external high frequency and automatic control of the state of charge. - Traction Chain gear ratio 1/10, 125 - Differential aluminum satellites treated steel - axle shafts with couplings 6 slot - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colours: white, red, green, yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. Moderate purchase price In these facilities, Bigà can be used for: - individual transport of personnel - control, inspection and security service - maintenance, cleaning and transport of small packages - towing with trucks up to 800 kg GENERAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover with 3.00-4 tires room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 800 watt - 24 volt 800 watt motor RR 1/10 - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - Traction tubular plate - 102/157 Ah - Built-in charger or external high frequency and automatic control of the state of charge. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft with grafts and 6 hp - Voltage reducer 24 to 12 volts for lighting system - Brake system: front disc brake, rear differential, brake lever on the left and enhanced engine braking from the calibration of the electronic control. - Blue color.
"coreless rewinder rp" is a completely automatic rewinder (roll to roll) that allows to rewind air bubble film for packaging in small rolls without internal core ( pony roll ) This rewinder born following the request of our customers to enter in the markets of hardware store, shopping mall, bricolage shop, etc., where the air bubble film cannot be sold in rolls with standard dimensions, but only in small rolls with few meters. This rewinder remove also the problem of the internal core cost that could be to much expensive if compared to the sold material. The plant is composed by different groups: Unwinder group complete with bearing brackets for the air expansion shaft with pneumatic closing system where the mother roll with an internal core (° 76mm) is loaded Central group complete with motorized nip-roll cylinder and pneumatic cut system with blade; Rewinder group where the material is rewinded without internal core thanks to rewinding rollers, unhooked and the present length and positioned on a basket. The plant also allows, through the application of an adhesive label or tape, to close the produced roll. Control panel where it is possible to set each parameters of production like number of rolls to produce and length. Once inserted the roll of departure, the "coreless rewinder rp" proceeds to the production of the rolls without internal core without any intervention of the operator which is only necessary to load a new mother roll and to remove the produced roll from the basket. The plant is conforming to the ce safety directives and it is furnished complete of manuals of operation and maintenance. Contact us
disposable 3 ply face mask is made of 3-layers,inside and outside layers are PP non woven,middle layer is high standard N95/N98 filter paper. 1.Size:17.5x9.5cm, 2/3-PLY. With Ear-loop and tie on style. 2. Very low resistance to breathing,free from foreign smell,without any stimulating feeling. 3. Nose bar can be adaptable,comfortable,without glass fibres,latex free. 4. PFE(Filtration efficiency of non oily particles)â?¥30%. 5. BFE(Bacteria filtration efficiency)â?¥95%(99%). 6. Use ultrasonic welding technology, comfortable wearing. 7. white,blue,green,red,pink,yellow can be available. Specification: 1.Directly manufacturer, disposable face masks, any colors. 2.NELSON,ISO,CE, BFE>99%,type II /Type IIR standard. 3.Capacity: 1000,000pcs/day, 1*40HQ can be finished within 8-15 days; 4.Laxet free ,easy breath, eco friendly, OEM packing design, service in 24 hours. Packaging 1)50 pieces per box, 40 boxes & 2000 pieces per carton 2)1 piece per bag, 50 pieces per box, 40 boxes & 2000 pieces per carton Store in a dry, cool place (
Safety gloves.
Metalworking machines, medical, laboratory.
Bevelling machine 10 wheels as is With washer Min. Dim.: 110x110 mm (40x40 with special device) Thickness: from 3 to 25 mm
Cnc work center 4 Axis Kit for engraving and bevelling Max dimensions 2180x2935 mm Thickness 3-50 mm Electrospindle: - Speed 15.000 rpm - Power 13,5 kW Max tool diameter 150 mm Power 24,75 kw
Glass material plexiglass display box.
dap in european union fob for other parts in the world very good prices 3ply masks 0.20 around 100k pcs ffp2 1.80 from 50k pcs all trustly certified
Safety Face Mask fabrics ,3 ply en 14683 masks and ffp2 masks fabrics .
Surgical, dental, lab instrument.