The sweet soap of the tradition, totally vegetable, is born from the saponifiation of vegetable oils of first quality, hence its typical colouring of white paste obtained without the use of optic whitening (dioxide of titanium). The high percentage of fat acids. (80%) and the addition of tuscan extra virgin olive oil in the phase of finish of the soap makes this delicate product to a daily ally for the care. And the personal hygiene. The high qualitative standard of production is constantly controlled in our laboratories of analysis. The soap is totally biodegradable and isn't tested on animals. The presence of the tuscan extra virgin olive oil enriches further the soap and makes it even more moistening and nutritious for the skin. The creamy and not aggressive foam cleans in effective but delicate manner. The precious essences with which the scent is composed are the results of many years of studies on the good perfumes of the tradition.
The perforating unit is totally an independent group that allows to pre-cut different types of material as film air bubble film, plain pe films, foam, paper to desired intervals. The plant results ideal to put in line with other system as extruders, air bubble film machinery, flexography printing machine. The group, built in steel with auto-level supports, it is composed from a rubber cylinder with neutral movement for the control of the speed of the material, group of pre-cut endowed with brushless motor and cylinder with toothed blades, cylinder of compression brushed and motorization for regulation from keyboard (minimum interval of pre-cut 200mm). The cover protection and the electric plant are conforming to the safety norms ce. The plant can be completed with the trimming group. Contact us
Ptek nre3 three phase is designed to recharge medium - large capacity traction And start lead-acid batteries, developed using our forty-year experience in the field Of battery chargers and multi-years application of microprocessor control systems D electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, equalization charge based on Time, charging with decreasing current (wa characteristic):9÷11 h charging time, Transformer thermal protection, modular installation on galvanized steel base, sheet Steel case with modular panels, epoxy powder coating, oven-baked, standard color: Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains Input and d.C. Output polarized cables, complete with mains and battery cables; Assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge). It will start after 55’ from charge end, Duration of equalized charging phase: each hour 5’ (repeated for 48 Hours), calculation to determine the size of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, mass-produced Mains leads, input cable, connection to the battery Through anderson-rema power terminals. Nfm Switching battery charger, high frequency technology, Fully controlled by microprocessor. 240v single-phase +- 10%, luminous display for a Easy reading of the charging parameters. Different charging curves in accordance with the kind Of battery and choose among 16 standard curves, Preprogrammed valid for pb-acid, gel. Battery voltage and charge current can be changed Through the button in the front panel. “soft start” mode and display of the charging cycle With led . Electronic protection and/or fuse against short circuits Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, mass-produced Mains leads, input cable, connection to the battery Through anderson-rema power terminals. Nfc Switching battery charger, high frequency technology, Fully controlled by microprocessor. 240v single-phase +- 10%, luminous display for a Easy reading of the charging parameters. Different charging curves in accordance with the kind Of battery and choose among 16 standard curves, Preprogrammed valid for pb-acid, gel. Battery voltage and charge current can be changed Through the button in the front panel. “soft start” mode and display of the charging cycle With led . Electronic protection and/or fuse against short circuits Over voltages, polarity reversal, anomalies. Error code of any anomaly, inner self ventilation Through forced air, efficiency > 85%, error code Display missing, mass-produced input network cable, Output cables polarized.
Ptek nr3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of Battery chargers and multi-years application of microprocessor control systems which On, short check of functions and Times, option to program the equalized charge automatically, lab tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, equalization Charge based on time, charging with decreasing current (wa characteristic): 9÷11 H charging time, transformer thermal protection, modular installation on galvanized Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen Printing, mains input and d.C. Output polarized cables, complete with mains and Battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah Battery: 16ax5 = 80a).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Benefits of hf technology Optimal availability for use and long service life can only be Achieved from motive power batteries when the battery and The charger are perfectly matched. The hf technology permits: Compact wall-mounted designs to save floor space. Significantly higher electrical performances. Shorter recharge time, saving energy and a reduction of The batteries temperature during the cycle, also a strong Reduction of the co2 emissions and lower water consumption, Which helps prolong the life of the batteries. High production Yield. Soft start mode and a customized charge curve on Request. The three phase black hawk is a versatile device, Different charging curve software could be installed for a Specific customized charging profile for any type of battery. Application: Suitable for the cyclic recharge of lead - acid batteries and Floating of sealed gel and / or lead - acid batteries. Air pump available (optional extra) Download data available trough pc/laptop (optional extra)
The DURFO SET 1200 monoblock is designed to fill jars and bottles with thick products and cap with twist-off closures. Electrowelded stainless steel base-frame placed on 4 adjustable supports (in alternative placed on wheels). All the machine operations (filling, capsule distribution, capsule closure) are achieved on a big sized central starwheel. Machine to be included in a production line, supplied without chain and drive motor. PRODUCTIVITY (with 500 gr. jar): 1.200 pcs. Consisting of: VOLUMETRIC PNEUMATIC DOSING UNIT - for liquid and dense products (honey, jam, mayonnaise, sauces, creams, etc.) - adjustable from 20 a 680 cc with micrometer screw - pneumatically-operated 3-way double buffer valve - anti-dripping pneumatic device CAPSULES DISPENSER * magnetic orienting / feeding bowl for twist-off caps * stainless steel chute, adjustable to fit different caps sizes, with pick-up head * sensor detecting the lack of capsules on the chute AUTOMATIC CAPPING UNIT + automatic capsule distribution + magnetic type capping head with controlled torque power + speed of the capping head adjustable by inverter, + electronic 'no bottle - no cap' device
Dear sir/dear madame, Select monthly product 350000kg italian, swiss, oland and german. We have a huge selection of products is strictly controlled to ensure every customer always a good quality from 39 years makes us leader in the sector of the used clothing. We analyze your business and are interested in a business relationship based on seriousness and professionalism. We offer a wide variety of related products and services: Possible preparing your shipment. We can prepare in max 15 days. The packaging may be made in different packs and weighs: (45-50-55-80-350kg) We can supply you : Africa market selection: (attached in email) Tropical mix 0.75 €/kg exw. Winter mix 0.75 €/kg exw. Original shoes 1, 35 €/kg exw. Paried shoes 2.10€/kg exw. Raw materials 0.22€/kg exw. Original italian used clothing at 0, 75 €/kg exw. As payment do 50% advance payment for the order and 50% of goods are ready to load. Let us know if you are interested at some products. Awaiting your reply as soon as possible. Best regards, The packaging may be made in different packs and weighs: (45-50-55-80-350kg)
Product Name : Men bracelets Product Code : PA373M Product Description : Bracelet man silver pattern. This, like our other and bracelets made with silver foil 925/1000 intertwined with each other, creating a flexible tube of rectangular shape. The effect that comes out is great, modern, we go out from the usual silver bracelets, for the closure is very practical, internally there is a steel spring that allows you to open and close it around your wrist, controlled more or less close. The size: 6 mm wide 3.00 mm thick we encourage it to 18.0 cm but you can request your size and the price does not change, only need 8-10 days to have it. Product Origin : Italy Key Specifications & Special Features : Silver bracelets Man bracelets men enamel and silver bracelets men to throttle, bracelets men's fashion, fashion silver bracelets, bracelets sporty silver, silver and rubber bracelets, antique silver bracelets, silver bracelets semi-rigid, hand-made bracelets men, silver chain bracelets.
With decreasing Current (wa characteristic): 9÷11 h charging time, transformer thermal protection, Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked, Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen Printing, mains input and d.C. Output polarized cables, complete with mains And battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of the final charge at 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging Time (equalization charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from charge end, duration Of equalized charging phase: each hour 5’ (repeated for 48 hours), Calculation to determine the size of suitable battery charge: 16a for Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
The smoke evacuators CS series are innovative suction units designed to evacuate and filter the smoke produced during the electro-surgical procedures. Eliminate the bad smells or the bacteriological risks and solving the problem of the visual field during the laparoscopic procedures. The CS200 model is equipped with an electric suction group at high flow and medium noise with TURBO function to high suction. Suitable for the out-patient treatment, connectable to gynecological speculum, to suction systems on the electrodes-handle, and to the fixed tubing on the operation point. The most complete model CS900LC is equipped with an electric suction group at high flow and low noise, a special circuit for the connection to a centralized vacuum system and another circuit for the controlled output of the CO2 which is used in the laparoscopic procedures with the pneumoperitoneum. Suitable for the usage in the operating theatre, thanks to the low level of noise produced and high performance. The CS200LC model is the same as the CS900LC model, but it is equipped with a less powerful electric suction group. All the models can be used as a shelf for the electrosurgical units. Available specific trolleys for the out-patient treatment and the operating room.
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
ier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic Start, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002 red, option: custom-made colour, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request. “WA” CHARACTERISTIC (DIN 41774): charge at decreasing current with intervention of the final charge at 2.40 V/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization charge (week-end charge) to be recalled. It will start after 55’ from charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable battery charge: 16A for every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
The Company is located in Campania, in Southern Italy. This is the area that provides the source for Mozzarella di Bufala Campana - a pure, fresh cheese obtained directly by processing 100% whole milk from carefully selected buffalos reared on the best farms and from livestock raised in semi-free-range conditions and fed on grass, corn, fodder, hay, bran and straw. The organization owns a factory equipped with the most up-to-date equipment. This facility extends over an area of around 2,000 sq metres with a further 8,000 sq metres used for loading and unloading, car parking, etc. The Company main product is Mozzarella di Bufala Campana DOP in various shapes and sizes: - balls from 25-500g - plaits from 125-500g. - special formats on request up to 3kg in weight. The Company also produces - fresh, homogenized and pasteurized ricotta, - butter exclusively made from buffalo’s milk. Quality in the broadest sense of the term really is the main objective of the Company: quality of the product, quality of customer service, quality of raw materials, all complemented by an unflagging dedication to customer satisfaction. With a view to reaching this objective, the Company has attained the following quality certifications: - ISO (the International Organization for Standardization), Standard ISO 9001 - The Company is subject to a very stringent HACCP (Hazard Analysis and Critical Control Points) system, thus allowing its products to be exported to countries including France, Germany and the United States, where there are extremely strict regulations on the permission to import goods. - As a member of the Consortium for the Protection of Buffalo Mozzarella of Campania with PDO (Protected Designation of Origin) status, the organization is subject to further product certification. - BRC (British Retail Consortium) - IFS (International Food Standard) - The Company also complies with the provisions as laid down by regulation CE 178/2002 concerning product traceability along the production chain. The Company wishes to get in touch with importers and wholesalers interested in high quality and certified milk products from Southern Italy. Target Countries: Russia, China, Australia.
Electric cart SPECIFICATIONS: Dimensions: Total Length mm 930 Width mm. 650 Height mm. 1070 Floor Length mm 870 Width mm. Ground Clearance 620 mm. 330 Weights: Total kg including batteries. 77.90 Batteries kg. 13 each. x 2 Motor: Permanent magnet motor with electric 200 W - rpm 120 - 24 V electro 24VDC 2Nm. Voltage and batteries: no Two 12V batteries 32 A C5 sealed gel - series connection, without maintenance. External charger 24 v - 8 ampere - Electronic microprocessor - Power supply 220 v. Brakes: Electric brake block engine, listing in the event of power failure. braking on deceleration (engine braking) enhanced in the calibration of the parameters of the controller. Speed and Capacity (performance with the vehicle in perfect working order on flat surface: Max 5 Km / h + / - 10% Max 250 kg. terms and 100kg. slope of 15%. Maximum flow rate is considered with the load distributed uniformly on the floor. Tires: 2 wheels rubber tires mounted on rims with pneumatic 3.00-4 6-ply roofing. 2 wheels 200x50 diameter core polypropylene gray synthetic rubber ring mounted on swivel mounts. Frame: Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 6018 Spare parts and tools for the maintenance and repair: Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa. Sound level values: less than 70 dB (A)
"coreless rewinder rp" is a completely automatic rewinder (roll to roll) that allows to rewind air bubble film for packaging in small rolls without internal core ( pony roll ) This rewinder born following the request of our customers to enter in the markets of hardware store, shopping mall, bricolage shop, etc., where the air bubble film cannot be sold in rolls with standard dimensions, but only in small rolls with few meters. This rewinder remove also the problem of the internal core cost that could be to much expensive if compared to the sold material. The plant is composed by different groups: Unwinder group complete with bearing brackets for the air expansion shaft with pneumatic closing system where the mother roll with an internal core (° 76mm) is loaded Central group complete with motorized nip-roll cylinder and pneumatic cut system with blade; Rewinder group where the material is rewinded without internal core thanks to rewinding rollers, unhooked and the present length and positioned on a basket. The plant also allows, through the application of an adhesive label or tape, to close the produced roll. Control panel where it is possible to set each parameters of production like number of rolls to produce and length. Once inserted the roll of departure, the "coreless rewinder rp" proceeds to the production of the rolls without internal core without any intervention of the operator which is only necessary to load a new mother roll and to remove the produced roll from the basket. The plant is conforming to the ce safety directives and it is furnished complete of manuals of operation and maintenance. Contact us
Canon EOS-1Ds Digital Camera Key Features Image Sensor Type CMOS Resolution 11.1 Megapixel Camera Type SLR/Professional Lens Interchangeable Lens With Interchangeable Lens Digital Zoom Without Digital Zoom Focus Type Autofocus & Manual Focus Focus Range Varies With Lens Image Quality Resolution 11.1 Megapixel Resolutions 4064 x 2704 = 2032 x 1352 Exposure Control ISO Speeds 100 Shutter Speed 30 - 1/8000 sec White Balance Auto = Manual = Daylight / Sunny (Preset) = Fluorescent (Preset) = Tungsten (Preset) = Shade (Preset) Overcast (Preset) = Flash (Preset) Frames Per Second 3 Frames Storage Memory Type CompactFlash Card Type I Compression Modes Fine = Normal = Uncompressed Compression Type JPEG = Raw Image File Size (High Res.) 11.4 MB (11 images on 128MB card) File Size (Low Res.) 1.4 MB (about 91 images on 128MB card) Flash Flash Type External Viewfinder / Display Viewfinder Optical (Through-the-lens) LCD Panel With LCD Panel LCD Panel Size 2 in. LCD Screen Resolution 120,000 pixels LCD Protected Position Without LCD Protected Position Interfaces Interface Firewire Power Supply Battery Type Proprietary Lithium Battery Life 600 Images Included Features Self Timer 2 Sec. = 10 Sec. Mp3 Built In Without MP3 Built-in Microphone With Built-in Microphone Built-in Speaker Without Built-in Speaker Tripod Mount With Tripod Mount System Requirements Operating System Apple Mac OS 8 = Apple Mac OS 9 = Microsoft Windows 2000 = Microsoft Windows 98SE = Microsoft Windows ME = Microsoft Windows XP Warranty Warranty 1 Year Miscellaneous Included Accessories Software = Hand Strap = Driver = Battery Charger = Strap Dimensions idth 6.1 in. Depth 3.1 in. Height 6.2 in. Weight 2.79 lb
Technical sheet Biga’ pick-up: Dimensions: Total Length mm 1541 Width mm. 740 Height mm. 1120 Worktop length mm 95 Width mm. 740 Height from the ground mm. 310 Weight: Total including batteries and banks kg.156 Set 3 banks kg. 4 Batteries kg. 27,5 each x 2 Gear Motor: Permanent magnet engine R.R. 10/1 800 W – rpm 330 – 24 V. Voltage and battery: N. 2 batteries capacity 12V 140 A C20 hermetic gel– connected in series, no maintenance. External battery charger 24 v – 12 amp – electronic microprocessor control- Power 220 v. Differential and transmission: Differential, maximum torque of torsion 2 Kgm - 2 Semiaxis with graft at 6 caves Type 13: transmission chain, Sprocket 13 teeth, Crown wheel 45 teeth, Ratio 1/3,47 Type 19. transmission chain, Sprocket 19 teeth, Crown wheel a 45 teeth, Ratio 1/2,37 Type 23: transmission chain, Sprocket 23 teeth, Crown wheel 45 teeth, Ratio 1/2,00 Type 28: transmission chain, Sprocket 28 teeth, Crown wheel 45 teeth, Ratio 1/1,61 Type 34: transmission chain, Sprocket 34 teeth, Crown wheel 45 teeth, Ratio 1/1,33 Brakes: Front drum brake, activation with right hand Back drum brake, activation with left hand Service brake, activation on left lever. Braking increase by the release of the accelerator (engine brake) enhanced in the setting of the parameters of the junction box. Speed and capacity: Towing besides the driver (performance with the vehicle in perfect efficiency) on flat road. The maximum capacity is considered with uniformly distributed load on the worktop and the center of gravity of the goods must not exceed the height of mm. 350 Type 13 max 5 Km/h +/- 10% P/T 800 kg. on the plane P/T 100 Kg. on slopes 15% Type 19 max 6,5 Km/h +/- 10% P/T 600 kg. on the plane Type 23 max 8,5 Km/h +/- 10% P/T 450 kg. on the plane Type 28 max 10,5 Km/h +/- 10% P/T 300 kg. on the plane Type 34 max 12 Km/h +/- 10% P/T 200 kg. on the plane Tires: Covering: 3.00-4 superelastic rubber Structure: Tubular and sheet Fe 37 polyester powder painted for outdoor use Ral 9007 Lights and Devices: signaling and illumination main headlight and tail lights reverse buzzer, horn.
Electric small tower tractor. SPECIFICATIONS: Biga 'Pick-up versions and performance with the vehicle in perfect working on flat surface. type 13 max 5 Km / h + / - 10% P / T 800 kg. on the P / T 100 Kg on slope 15% Type 19 max 6,5 Km / h + / - 10% P / T 600 kg. Type 28 up to 8 Km / h + / - 10% P / T 400 kg. Type 34 up to 11 Km / h + / - 10% P / T 200 kg. The maximum range is considered with the load evenly distributed on the plane and the center of gravity of the goods must not exceed the height of mm. 350. Dimensions: Total Length mm 1540 Width mm. 740 Height mm. 1130 Floor Length mm 940 Width mm. Ground Clearance 740 mm. 310 Weights: Total including batteries and banks kg. 176th September 3 banks kg. Batteries kg. 36 each. x 2 Motor: permanent magnet motor RR 10/1 800 W - rpm from 330 to 24 V. N. 2 batteries 12V 140 A sealed gel - connected in series, without maintenance. External charger 24 v - 12 amp - electronic microprocessor - 220 v. transmission: Differential, max. 2 Kgm torque - 2 Shaft with graft rejection in 6 slot. chain drive with front and rear sprocket. Brakes: Front drum, drive with your right hand. Rear disk drive with his left hand. brake, drive on left lever. increased by releasing the brake (engine brake) enhanced in the calibration of the parameters of the controller. Covers: 3.00-4 rubber tires Frame: Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 9007. lighting and signaling devices : Headlight main and tail lights - reverse buzzer, horn. phonometric values: values ??LpAm max = 77.6 - 85.6 LWA - Attendant Leq dB (A) 77.6 Vibration value: vmax (i) = 0.47 m / s2 (maximum value for operator sitting in the driver's seat). Spare parts and tools for the maintenance and repair: Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa.
