Light sensitive switch is a device that is used for automatically switching on and off the street lights garden lighting, passage lighting and doorway lighting etc in accordance with the natural lighting level. The lights connected to the light sensitive switch are turned on automatically in evening when the natural light falls below 15 lux. And lights are switched off in the morning automatically when the light level reaches above 20 lux. Eliminates the need of human operation for switching on and off any external light connected with this system. Saves energy saves electricity , no need to manually switching on and off the light, easy to install and durable. Applications: roadway lighting , building perimeter lighting , outdoor advertising signs , parking lot lighting, garden lighting passage lighting and doorway lighting etc.
Parameter specification : 1 switching capability 10 w (max) 2 switching voltage 100 vdc (max) 3 switching current 0.5 amps (max) 4 contact resistance 1 ohms max 5 dielectric : between terminals 200vdc for 1minute between body & terminal 500vdc for 1minute body & cable insulation 500vdc for 1minute 6 must operating distance 7- 14 mm with tvsc magnet tvsc-mfax-01 7 must release distance 10-25 mm with tvsc magnet tvsc-mfax-01 8 operating temperature 80 deg c max 9 surface temperature 5 deg c max @ ambient 10 ambient temperature -20 to +50 deg c x denotes for high temperature (50 deg c ) 11 IP rating ip 67. 12 sensor dimension 35x19x10 mm 13 Cable 2 core cable with shield 14 Approvals : CE & Atex.
We are proud to say that for the first time in India, we are launching Battery temperature sensors for commercial purposes. The specialty of the sensor is that we can measure the in situ temperature. So far, the widely popular technique is to monitor the battery temperature by placing a sensor adjacent to it. As expected, the accuracy of this method is not up to the mark. Now with the advent of Arcotherm's unique sensors, more accurate values can be obtained. Currently, we are exporting these to the European market.
We manufacture Automobile Industry related temperature sensors. In BULK: 1) Automatic transmission (position sensor and ATF temperature sensor) 2) Motor temperature sensor 3)Battery temperature sensor/ current senso 4) Exhaust gas temperature sensor (recirculation) 5) Ambient air temperature sensor 6) Steering wheel and seat heat temperature sensor 7) Air duct temperature sensor
SICK connects - complete connectivity from a single source. SICK provides connection devices that easily connect to other devices in your machine, regardless of the selected automatic identification technology. These devices enable easy integration of field bus gateways into the modular connection boxes, making it possible to incorporate the scanner, camera or RFID systems into different field bus technologies. A field bus proxy, external parameter memory, display, and power modules provide a high degree of application flexibility. At A Glance: Connection module for one ID pro sensor Clearly visible, easily accessible screw- and spring-loaded terminals Connection diagram on the inside of the lid Configuration with switches IP 65 connection for one ID pro sensor using standard connection cable Basis for CMC600 parameter cloning module Service plug for direct access to the AUX interface Your benefits: Compact design fits into small spaces Two mounting holes for fast, precise installation saves on installation costs Clearly labeled, easily accessible screw- and spring-loaded terminals save time when connecting to peripherals Quick, easy configuration with switches reduces installation time Industrial-standard connection guarantees a reliable application solution CMC600 parameter cloning module allows rapid exchange and replacement of connected sensors Product Family: In this type of sensors CDM, CDF, CDB series are available. Protection Class Protection class can be up to IP69K.
ARN-TS2D is a MEMS based single/dual axis inclinometer module that boasts a low price tag. It is most appropriate for mechanical industry, transportation, heavy vehicle, construction and survey applications. This device returns highly accurate angular data in static conditions and can be a part of lab instrumentation, platform stabilization equipment and oem alignment measuring instruments. Single axis module returns roll and dual axis returns roll and pitch information. 1. Measurement range: 60deg (Pitch), 180deg (Roll) 2. Accuracy in static conditions: 0.1 degrees 3. Size: < 78 mm x 56 mm x 36 mm 4. Weight: < 200 grams. 5. Output rate: 1 to 50 hz configurable 6. Power supply: - +8 to +12 vdc 7. Interface: RS232, RS485 serial digital.
Details as follows : Rotational-speed range : 20 . 7000 rpm Permanent ambient temperature in the cable area : -40 to + 120C Permanent ambient temperature in the coil area : -40 to + 150C Winding resistance at 20 C 860 : 10 % Inductance at 1 kHz 370mH : 15 % Degree of protection : IP67 Output voltage : 0.200V
Electrical : Output: Analogue or digital Typical Linearity: 2.5% (absolute) 1.0% (independent linearity) Typical Travel: 15mm electrical* / 18mm mechanical* (*application dependent, adaptable to larger or smaller travel requirements) Nominal Index Voltage : Programmable Electrical Limit Maximum : 20 VDC Supply Voltage : 4.5 - 5.5 VDC Typical Current Draw : 12 mA (dependent on program conditions) Maximum Response Time : 600 S Durability : Typical Vibration: 200 hrs.; 3 planes; 20 - 2000 Hz; 40G RMS;-40C -160C. Typical Thermal Shock: 500 cycles, -40C and 160C; 15 sec. transition; 30 min. soak at each temperature Typical Temperature Range: -40C > 160C
Inductive proximity sensor Input voltage 8~32 vdc, sensing distance 2~10 mm Size m-12 and m-18, m-28 , rectengular or as per Specifications diamentions user oriented 12 pcs, 120 pcs
Flow Sensor DN 10 RRH-010 DN 25 RRH-025
Supplier of walk-in environmental test chamber. Designed to perform high-temperature operations for large-sized test specimens. The multipurpose walk-in chamber is the perfect site for testing the components against humidity, temperature, and various climate conditions.
Bag filters are used for removal of solids from liquids. Depending on pressure, flow, viscosity, nature of liquid, we can design and manufacture a suitable liquid bag filter. The housing of the filter can be Mild Steel, Stainless Steel, FRVE or any other.i
We have available following Ships spares for Sale: Product-Oxyzen Sensor Type-RGD90 Part no-S01-169
Ultrasonic Sensor Module HC-SR04 HC-SR04 Sensor Features Operating voltage: +5V Theoretical Measuring Distance: 2cm to 450cm Practical Measuring Distance: 2cm to 80cm Accuracy: 3mm Measuring angle covered:
Gas Distribution Monitoring Systems : Unlike many competitors who sell boxes, PMAS delivers total secure end-to-end connectivity solution that seamlessly integrates remote devices & sites to centralized management systems i.e. SCADA. No changes in the existing system are needed. Gas Monitoring Systems is operator-independent and allows customer to implement two way communication in a similar manner all around the world. Features: Reliable Industry Leading Prices Easy Maintenance
MFS100 is high quality USB fingerprint sensor for fingerprint authentication for desktop or network security. MFS100 is based on optical sensing technology which efficiently recognizes poor quality fingerprints also. MFS100 can be used for authentication, identification and verification functions that let your fingerprint act like digital passwords that cannot be lost, forgotten or stolen. Hard optical sensor is resistant to scratches, impact, vibration and electrostatic shock Features : Lowest FAR and FRR Support Aadhar Auth API Specification V2.0 Device Securely Sign The Biometric Data UIDAI Certified RD Service & PID block Encrypted with in RD Service Plug and play USB 2.0 high speed interface supports multiple devices handling 500 dpi optical fingerprint sensor scratch free sensor surface Supports Windows 7,8,10, Windows Vista, Windows 2000,Windows Server 2003/2007/2008, Linux, Windows ME, Windows 98 SE SDK, Libraries and Drivers support across all above Platforms. (32 Bit and 64Bit) Easy Integration on to production servers and application support SPECIFICATIONS Fingerprint Sensor Optical (scratch free sensor surface) Resolution 500 DPI / 256 gray Sensing Area 15 x 17 mm Operation Temperature 0~50C Standards ANSI-378, ISO19794-2 Supports Encryption algorithms AES256, RSA2048 Supports HASHing algorithms MD5, SHA256 Physical Unique Device ID Interface USB 2.0 High speed/Full speed, Plug & Play CE, FCC, RoHS, IEC60950 Certified
Product Description: The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files). You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar; see these instructions for details. Speed(MHz) 16MHZ Core Size (Number of Bits) 8 Bit RAM Size 2KBYTE ROM Type EEPROM Flash Number of Pins 28 Other Detail: Microcontroller ATmega328P Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz LED_BUILTIN 13
Product Description: The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files). You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar; see these instructions for details. Speed(MHz) 16MHZ Core Size (Number of Bits) 8 Bit RAM Size 2KBYTE ROM Type EEPROM Flash Number of Pins 28 Other Detail: Microcontroller ATmega328P Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz LED_BUILTIN 13
Features Advanced flat surfaced alcohol sensor, high sensitivity Rapid detect results quick response and resume High accuracy, detection range 0.000 0.199 BAC 0.00 1.99 BAC 0.00 0.99 mgL Easy to use, Light weight, With a bag for it, easy to carry Low power consumption , auto power-off, Long span life Sensor fault self checking Blue colored backlight LCD display. Description Color Black LCD Back light Blue Sensor Advanced flat surfaced semiconductor alcohol sensor Warm up time Within 10 seconds Respond time Within 5 seconds Operating temperature range 5 40 Detection range 0.000 0.199 BAC 0.00 1.99 BAC 0.00 0.99 mgL Digital display results BAC BAC mgL Power input 3V 3 alkaline battery, not included Net weight 70g
Electronic sensors.
