Surfaced Alcohol Sensor

DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed. Product Features 1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly. DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency . 2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs 130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc. 3.External reference platinum resistance thermometer to reduce calibration uncertainty In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy. 4.Excellent uniformity of temperature and surface finish on the calibration plane Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform. 5.Temperature control is accurate, stable, and overshoot temperature is small The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature. 6.Portable and easy to use The weight of the whole machine is only 3.5kg, which is small and portable.

Parking system comes on automatically when reversing Sensor: 2, 3 or 4 detectors available to satisfy full needs of customers Digital distance display of obstacles Voltage: 12-16v dc Current: 10ma-300ma Temperature: -30¦~ +70¦ Detective range: 0.4m to 1.5m Operating frequency: 40 khz Features: Multi-purpose lcd monitor for vcd/dvd/tv/gps System comes on automatically while reversing, this optical parking system could be used As car parking sensor. Easy installation, clip the monitor on the original one. Delicate design could match the interior design of car. Multi-layer optical anti-glare blue mirror to make safer driving Blue screen appears with disappearance of video signal Using imported abs plastic and painting, free from scratching and alcoholic erosion and Lasts long

Parameter specification : 1 switching capability 10 w (max) 2 switching voltage 100 vdc (max) 3 switching current 0.5 amps (max) 4 contact resistance 1 ohms max 5 dielectric : between terminals 200vdc for 1minute between body & terminal 500vdc for 1minute body & cable insulation 500vdc for 1minute 6 must operating distance 7- 14 mm with tvsc magnet tvsc-mfax-01 7 must release distance 10-25 mm with tvsc magnet tvsc-mfax-01 8 operating temperature 80 deg c max 9 surface temperature 5 deg c max @ ambient 10 ambient temperature -20 to +50 deg c x denotes for high temperature (50 deg c ) 11 IP rating ip 67. 12 sensor dimension 35x19x10 mm 13 Cable 2 core cable with shield 14 Approvals : CE & Atex.

INFRARED SENSOR WITH SILICON LENS SMTIR9902SIL Typical Applications * Contactless measurement of surface temperatures * Temperature measurement of moving objects * Remote measurement due to small angle of view * Climate control * Medical instruments Introduction The Smartec infrared sensor type SMTIR9902SIL is a standard Smartec SMTIR9902 sensor equipped with a silicon lens for measuring radiation temperatures within a small angle of view (7.27'). The SMTIR9902SIL contains a NI1000 temperature sensor for measuring the temperature of the sensor itself. The temperature range of this internal sensor is -20 to 100 'C. The sensor is mounted in a modified TO-05 encapsulation.

Water fluid liquid level sensor llc200d3sh Model number: llc200d3sh 1.General description The liquid level sensor provides a single point detection via a Ttl compatible output. An infra-red led and phototransistor accurately positioned at The base of the cone ensure good optical coupling between The two when the sensor is in air. When the sensor’s cone is Immersed in liquid, the infra-red light escapes from the cone Causing a change in the amount of light at the phototransistor Which makes the output change state. 2. Cleaning Proper fluids should be selected based on type of Contamination to be removed. Sst sensing recommends Freon and alcohol based solvents. Do not use chlorinated Solvents such as tricholorethane as these are likely to attack The sensor material. 3.Liquid media compatibility Before use check that the fluid in which you wish to use these Devices is compatible with polysulphone.

C4E Conductivity Sensor electrode technology: The sensor works with 4 electrodes: An alternating current of constant voltage is established between a primary pair of electrodes in graphite. The secondary electrodes in platinum regulate the voltage imposed to the primary electrodes to reflect the fouling. The voltage measured between the primary electrodes is the function of the resistance and therefore a measurement of the conductivity. C4E Conductivity Sensor Digital Technology : The smart digital C4E sensor stores calibration history data within the sensor. This allows a 'plug and play' system without re-calibration. C4E Conductivity Sensor Digitally optimised measurement technology * 4 electrode conductivity sensor (2 graphite & 2 platinum) * Smart sensor stores configuration settings and calibration history * Range 0-200 mS/cm * Digital sensor - Modbus RS-485 * Robust and watertight C4E Conductivity Sensor Applications * Industrial effluent treatment * Urban wastewater treatment * Surface water monitoring * Sea water * Drinking water C4E Conductivity Sensor Specification * Measured conductivity ranges: 0-200.0 uS/cmâ?? * Resolution: 0.01 to 1 according the range * Accuracy: +/- 1 % of the full range * Response time: < 5 s * Working temperature: 0'C to 50'Câ?? * Signal interface: Modbus RS-485 ( option SDI-12) * Maximum pressure: 5 barsâ?? * Protection: IP68 -

INFRARED SENSORS SMTIR9901/02 Typical applications * contactless measurement of surface temperatures or infrared radiation * temperature measurement on moving objects * continuous temperature control of manufacturing * thermal alarm systems * climate control * medical instruments * home appliances Features High accuracy High sensitivity (110 V/W) Low resistance (50 Kohm) and therefore Very good signal-to-noise-ratio Good response time (40 ms) Low cost thin film technology Introduction The Smartec infrared sensors SMTIR9901 and SMTIR9902 are sophisticated full silicon infrared sensors which can be used in measuring the radiation temperature without any contact. For the different radiation temperature ranges various filters are available. The sensor type SMTIR9902 contains a temperature sensor for measuring the temperature of the sensor itself. The temperature range of the sensor-element is between - 40 to 100 'C. The sensor is available in a standard TO-05 encapsulation and with a 5.5. µm. high pass filter. Easy and accurate measuring of the sensors temperature by means of a built-in temperature sensor (only for type SMTIR9902).

EKO Heat Flow Sensors MF-180 MF-180M MF-190 MF-200 EKO Heat Flow Sensors are suitable for the direct measurement of heat flow inside materials, and the measurement of the radiant flow emitted by bodies such as refrigerators and containers. Principle of thr measurement There are three modes in heat transmission,thermal conduction, radiation and convection. If the heat flow sensor is placed on the surface of the material, it measures the total value of those three modes. If the sensor is placed inside the material, it directly measures the heat transmission caused by thermal conduction.

NTU Nephelometric Turbidity & Temperature Sensor Optical technology : The measure principle is based on IR nephelometry / 880 nm (ISO 7027). The sensor can be calibrated with a formazine standard solution. The NTU sensor integrates a low-cost optical technology, with a very few maintenance and no consumables. NTU Nephelometric Turbidity & Temperature Sensor Digitally optimised measurement technology * IR optical sensor with optical fibre * Range: 0-4000 NTU or 0-4500 mg/L * Digital sensor: Modbus RS-485 * ISO 7027 compliant * Robust and waterproof NTU Nephelometric Turbidity & Temperature Sensor Applications * Industrial effluent treatment * Urban waste water treatment * Surface water monitoring * Drinking water * Sanitation network NTU Nephelometric Turbidity & Temperature Sensor Specifications * Measurement principle: Diffusion IR at 90' * Range: 0-4000 NTU or 0-4500 mg/L * Resolution: 0,01 to 1 NTU - mg/L * Accuracy: < 5% of the reading * Temperature compensation: via CTN * Operating temperature: -10'C to + 60'C * Signal interface: Modbus RS-485 (standard) and SDI-12 (option) * Sensor power-supply: 5 to 12 volts -