Wire drawing lubricants powder
Products: - Lubricating Oil, Engine Oil, - Grease - Sprayvan Hardware Spray, Hardware Stretch Oil - Additives - Base Oil Benefit: - Lubrication is 6 times than regular products - Extend Maintenance Period 4+ times at least - Reduce Temperature 10~60�¢?? - Reduce Total noise reduces 10dB+ - High-frequency noise reduces100% - Bear heavy duty including impact load and point load - Good Permeability Easily infiltrate any micro defects - Waterproof...
1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases. 2. Specification: Q/SHG19-2008ItemIndex Product: LM200 Apparent: White solid colloidal micro-particle Specific surface area m2/g: 150�±15 PH value3.6~4.3 Heating loss weight % (m/m) â?¤1.0 Burning loss weight % (m/m) â?¤1.0 Apparent density g/Lâ?¤60 3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber. LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink. LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component. LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc. 4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content. 5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.
SAE 5W-30 V-TECH 1 Synthetic Blend VIRGINOIL SAE 5W-30 SYNTHETIC BLEND MOTOR OIL is a premium quality multi-grade motor oil designed with an advanced additive system for superior engine protection even under the toughest driving conditions. It outperforms conventional motor oil, reduces friction and wear at start-up and protects your engine against performance robbing sludge and varnish deposits. VIRGINOIL Synthetic Blend Motor Oil is recommended for use in passenger car, light duty truck, sport utility vehicle and other mobile and stationary engines. VIRGINOIL SAE 5W-30 SYNTHETIC BLEND MOTOR OIL meets or exceeds car manufacturersâ?? ILSAC GF-5 and American Petroleum Institute (API) Resource Conserving SN service classifications and is backwards compatible with all earlier API categories. VIRGINOIL Synthetic Blend 5W-30 has been field tested to be comparable to most American, Asian and European manufacturersâ?? standards including ACEA A1/B1 & A5/B5, Chrysler MS 6395S and Ford WSS M2C945-A, M2C946-A and other specifications where a synthetic blend API SN/GF-5 motor oil is recommended.
VIRGINOIL AUTOMATIC TRANSMISSION FLUID ( ATF III) VIRGINOIL ATF III is a high performance formulation of base oils and a sophisticated additive package designed for Ford Motor Company transmissions since 1997. VIRGINOIL ATF III meets MERCON® and MERCON® V transmission fluid requirements. It meets performance requirements of Dexron® III, and Allison, Voth and ZF heavy duty transmissions. and and anti-wear hydraulic fluid. features/ benefits Excellent all-temperature, year-round protection and performance - VIRGINOIL ATF III remains fluid at low temperatures for cold weather shifting and to eliminate premature wear (especially at start-up) and maintains its properties at high temperatures and under extreme loads and operating conditions. Proven anti-wear protection and shear stability - VIRGINOIL ATF III will help to extend the life and service intervals of your transmission, especially for transmissions experiencing more startup and/or shift cycles, or extreme loads or environments. Excellent Friction Retention - The proven additive technologies combine to provide smoother, more consisting shifting performance and provide smooth, positive lockup, for long fluid life Extended service life and performance - VIRGINOIL ATF III resists oxidation, retains frictional performance, and protects against rust and corrosion. VIRGINOIL ATF III is designed for use in: Any automatic transmissions manufactured around the world calling for: Mercon V, Mercon or Dexron III ATF Passenger cars â?¢ Light and Heavy Duty Trucks â?¢ Commercial Vehicles and Trucks On/Off Highway Vehicles â?¢ Buses and Coaches â?¢ Emergency Vehicles May also be used in power steering units and hydraulic system Not for use in CVT (Continuously Variable Transmissions) or DCT (Dual Clutch Transmissions) which re- quire specialized fluids. recommendations/specifications VIRGINOIL ATF III is Approved for all MERCON® V applications Is suitable for use in the vehicles that specify the following requirements: Ford MERCON®, Ford ESP-M2C138-CJ, Ford ESP-M2C166-H GM DEXRON®, DEXRON® II, II-E, III, III-G, III-H Allison C-3, C-4, Caterpillar CAT TO-2 ATF recommendations may vary between models from a manufacturer Consult ownerâ??s manual for the correct fluid recommendation
Virginov-tech syn full synthetic Virginoil sae 5w-30 full synthetic motor Oil is a superior quality multi-grade motor oil designed with a state-of-the-art low friction additive system for maximum engine protection even under the toughest driving conditions. It outperforms conventional motor oil, reduces friction and wear at start-up and protects your engine against performance robbing sludge and varnish deposits. Virginoil full synthetic motor oil is recommended for turbo-charged and high-powered passenger car, light duty truck, sport utility vehicle and Other mobile and stationary engines. Virginoil sae 5w-30 full synthetic motor Oil meets or exceeds car manufacturers ilsac gf-5 And american petroleum institute (api) resource Conserving sn service classifications and is backwards compatible with all earlier api categories. Virginoil full synthetic 5w-30 has been field tested to be comparable to most american, asian and european Manufacturers standards including acea a1/b1 &a5/b5, gm 6094m, chrysler ms 10797, ms6395m, ford m2c930-a and other specifications where a full synthetic api sn/gf-5 motor oil is recommended..
Virginoil automatic transmission fluid ( atf iii) Virginoil atf iii is a high performance formulation of base oils and a sophisticated additive package designed for ford motor company transmissions since 1997. Virginoil atf iii meets merco and merco v transmission fluid requirements. It meets performance requirements of dexro iii, and allison, voth and zf heavy duty transmissions. And and anti-wear hydraulic fluid. Features/ benefits Excellent all-temperature, year-round protection and performance - virginoil atf iii remains fluid at low temperatures for cold weather shifting and to eliminate premature wear (especially at start-up) and maintains its properties at high temperatures and under extreme loads and operating conditions. Proven anti-wear protection and shear stability - virginoil atf iii will help to extend the life and service intervals of your transmission, especially for transmissions experiencing more startup and/or shift cycles, or extreme loads or environments. Excellent friction retention - the proven additive technologies combine to provide smoother, more consisting shifting performance and provide smooth, positive lockup, for long fluid life Extended service life and performance - virginoil atf iii resists oxidation, retains frictional performance, and protects against rust and corrosion. Virginoil atf iii is designed for use in: Any automatic transmissions manufactured around the world calling for: mercon v, mercon or dexron iii atf Passenger car¢ light and heavy duty truck¢ commercial vehicles and trucks On/off highway vehicle¢ buses and coache¢ emergency vehicles May also be used in power steering units and hydraulic system Not for use in cvt (continuously variable transmissions) or dct (dual clutch transmissions) which re- quire specialized fluids.
Virginoil anti-wear hydraulic oil Virginoil aw hydraulic oil Virginoil anti-wear hydraulic oils are superior quality general purpose anti-wear hydraulic fluids that contain a Additives to inhibit rust and minimize wear in high speed, high-pressure vane, gear, and piston pumps over a wide Operating temperature range. They are formulated according to the iso viscosity grade classifications that meet or Exceed cincinnati machine p-68, p-69, p-70, denison hf-0, hf-1, hf-2, vickers 35vq25, eaton/vickers m-2950-s, I-286-s, ford m6c32, chrysler, general motors ls-2, and us steel 136 performance specifications for stability and Durability and comply with most industrial applications requiring a premium anti-wear hydraulic oil. Benefits and applications Excellent thermal stability Special additives provide sludge and deposit control, and longer service life Excellent rust and corrosion protection for all system components Provide superior water separation and demulsibility Excellent anti-foam protection and rapid air release Provides anti-wear protection for pumps, motors, valves and other hydraulic circuit Components operating under high pressures and loads
Virginoil v-tech syn full synthetic Virginoil sae 5w-40 full synthetic motor Oil is a superior quality multi-grade motor oil designed With a state-of-the-art low friction additive system for Maximum engine protection even under the toughest Driving conditions. It outperforms conventional motor Oil, reduces friction and wear at start-up and protects Your engine against performance robbing sludge and Varnish deposits. Virginoil full synthetic motor oil is Recommended for turbo-charged and high-powered Passenger car, light duty truck, sport utility vehicle and Other mobile and stationary engines. Virginoil sae 5w-40 full synthetic motor Oil meets or exceeds american petroleum institute (api) sn service classification and is backwards compatible with all earlier api categories. Virginoil full synthetic 5w-40 has been field tested to be Comparable to most american, asian and european manufacturers standards including acea a1/b1 & a5/b5, gm 6094m, chrysler ms6395m and other specifications where a full synthetic api sn motor oil is recommended.
Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!
LC1001 is the semi-flowing heat-resistant silicone adhesive sealant which is made of special silicone rubber material the addition of thermal powders. With excellent conductivity,V0 flame retardant grade, excellent temperature resistance, can be in the range of 60 ~ 280 Long-term use. As well as good adhesion, long term use will not fall off, will not produce Contact gap to reduce thermal conductivity, moisture-proof, anti-seismic, anti-corona, anti-leakage and aging .The properties are widely used for the adhesion and sealing of the electronic components with high thermal conductivity, which is a single part of the acetone oxime type, It can be cured silicone rubber and conforms to the requirements of ROHS REACH UL. Typical Applications High power LED lamps and lanterns, electrical power, microwave oven, electronic components and other industrial products of thermal conductive adhesive sealing, alternative thermal conductive silicone used in high-power electric module and radiator thermal conductivity between fixed filling adhesive, no card buckle screw, more reliable filling heat, simple process and lower cost. Applying Process 1.Surface clean : Clean the surface of the adhesive object and remove the rust, dust and oil. 2.Sizing: Twist the cap of the hose, squeeze the gel into the clean surface, and make it natural. 3.Curing: Place the bonded or sealed parts in the air while them to solidify naturally. Curing is a process from surface to the internal, within 24 hours (at room temperature and 55% relative humidity) will cure the depth of the 2 ~ 4 mm, if the site location is deeper that completely curing time will be postpone, especially it is not easy to come into contact with air. if the temperature is low, cure time also will be postpone .Prior to further processing or wrapping the bonded parts, it is recommended that the user wait long enough to ensure that the adhesion and integrity of the adhesion are not affected. For more , please kindly feel free to contact
We supply high quality Used Engine Oil from Canada and USA, will be in Flexitanks, and shipped in 20' containers. Up to 2000MT available per month.
Lubricants.
Fuel oil.
Lubricants.
Lubricants.
Lubricant.
Lubricants.
Auto mobile lubricants.
Virgin automotive engine oil.