Origin:Ukraine and Russia,Uzbekistan,Poland MOQ.10.000MT CIF/CFR/FOB LOI/ICPO
Origin:Ukraine and Russia, MOQ.1.000MT CIF/CFR/FOB LOI/ICPO
Origin:Ukraine and Russia MOQ.5.000MT CIF/CFR/FOB LOI/ICPO
Origin:Ukraine and Russia,and CIS countries MOQ.40`FT container CIF/CFR/FOB LOI/ICPO
Origin:Ukraine and Russia,and CIS countries MOQ.40`FT container CIF/CFR/FOB LOI/ICPO
Origin:Ukraine and Russia,and CIS countries MOQ.1.000MT CIF/CFR/FOB LOI/ICPO
Origin:Ukraine and Russia,and CIS countries MOQ.1.000MT CIF/CFR/FOB LOI/ICPO
Chicken eggs origin ukraine S-M-L size M-CÄ°F 25$ ARABIAN GULF COUNTRY
Engine oil, base oil, marine oil, diesel, additives, jet fuel, edible nuts, dried fruits, fruits, truffles, jam, juice, confectionary, wheat, barley, alumina, bauxite, aluminum ingots and sheets.Transportation
Steel pipes, steel coils, tubing pipes, drilling pipes, casings, aluminium billets and aluminium wire, copper cathodes, BOP, drilling tools, submarine power and optic cables of LV, MV, HV, cable termination and connectors,V-belts, mud and drilling pumps and spare parts, rubber and plastic products, natural gas heaters, fire handling facilities, power panels.Transportation
To this day, petroleum acids are still being studied by a number of researchers. Interest in the above class of organic compounds is not only attributed to practical perspective, but also to general humanitarian purposes. According to S. Nametkin, "... composition and structure of petroleum acids are closely related not only to the genesis of oil, but to the origin of life on Earth as well". Depending on their origin, oils may contain different amounts of naphthenic acids, extremely insignificant in all cases. Naphthenic acids are extracted from oils using alkali alcoholic solutions. Structure of naphthenic acids in any oil is the same and depends on the nature of oil. Among the oil produced worldwide, and particularly in the CIS region, Azerbaijan's oil features the highest content of petroleum acids. Oils of Bibi-Heybat, Romani, Binagadi, Balakhani, Sabunchi and other fields are rich in petroleum acids, which content in some crude oil grades reaches 1.5 – 2%. Due to the fact that acids extracted from naphthene-base crude of Baku oil fields have the same composition and physical-chemical properties as synthetic naphthenic acids, they are often referred to as natural naphthenic acids.
o this day, petroleum acids are still being studied by a number of researchers. Interest in the above class of organic compounds is not only attributed to practical perspective, but also to general humanitarian purposes. According to S. Nametkin, "... composition and structure of petroleum acids are closely related not only to the genesis of oil, but to the origin of life on Earth as well". Depending on their origin, oils may contain different amounts of naphthenic acids, extremely insignificant in all cases. Naphthenic acids are extracted from oils using alkali alcoholic solutions. Structure of naphthenic acids in any oil is the same and depends on the nature of oil. Among the oil produced worldwide, and particularly in the CIS region, Azerbaijan's oil features the highest content of petroleum acids. Oils of Bibi-Heybat, Romani, Binagadi, Balakhani, Sabunchi and other fields are rich in petroleum acids, which content in some crude oil grades reaches 1.5 – 2%. Due to the fact that acids extracted from naphthene-base crude of Baku oil fields have the same composition and physical-chemical properties as synthetic naphthenic acids, they are often referred to as natural naphthenic acids.
Crude oil flowing from wells contain fair amount (often 20-30%, sometimes up to 60-65%) of water with dissolved salts from basis point up to 1-2%. This significantly increases viscosity of crude oil, generates stable emulsion and makes the oil inadequate for refining and transportation. Water produced together with oil is usually in very unusual state, i.e. it is spread in oil in the form of droplets (emulsified form). Less the size of droplets, more stable the emulsion. One of the main reasons of emulsion stability is also the presence of resin, pyrobitumen, paraffin, and other oil admixtures like glycerine, microcrystal of paraffin, ceresin in crude oil. These substances generate quite firm and thick (protective films) on the surface of water and solid particles thus preventing merging of water drops and solid particles and their spontaneous segregation from oil. At present physical, thermal, physico-chemical, electrical and combined methods of oil emulsion breaking are used for oil dehydration and oil desalting. One of the widelyused and most effective methods is physicochemical combined method using chemical reagents demulsifiers. Demulsifiers are substances with high surface activity. They are concentrated in interfacial areas of oil emulsion, break protective films covering solid particles, water droplets and neutralise their electric charges. After this, small droplets will merge into bigger drops under the influence of mutual attraction, loosen and segregated from oil.Oil demulsifying is carried out in oil field and oil refinery plants. At present “KARVAN-L” company tries to provide integrated work cycle: – development production supply and implementation of produced demulsifiers together with consumer. Demulsifier Karvan-200 is designed for oil dehydration and desalting in gathering system and oil treatment plant. Reagent can also inhibit corrosion processes.Demulsifier Karvan-201 is designed for separation of both light and heavy crude emulsion. This reagent is the composition of macroglycols and nitrogen-bearing surfactants in organic solvent environment Demulsifier discharge per 1 ton crude is 10-60gr. Dosage depends on emulsion stability, treatment temperature, water separation period and desired depth of oil processing. Optimum dosage and demulsifier application process ensuring necessary results can only be defined as per test results carried out in practical use sites.
One of the serious problems of natural environment protection during oil and gas production is liquidation ground by oil pollution. Oil and mineral oils disturbed ecological state of top-soils as a whole deformed biocoenosis structure. In results of damages (oil) pipe lines, oil-processing and petroleum distillating plants a great deal of oil and oil production comes in ground. Cleaning and reconstruction of in ecocatastrophe region realizes properly polluted ground impressments from pollution place with its posterior cleaning by chemical and biological methods or its, immediately contiguous to technological object also to environment air and burial on special firing range. Elimination the oil flood permits to greatly improve sanitary state not only on territories water. Oil hydrocarbons decomposition intensity and character in ground mainly defined by functional activity hydrocarbono-xidizing bacteria (HOB) capable to assimilate oil as a single carbon spring. Method biological or polluted burial on special firing range was not find wide application. Since the first method is virtual during of the ground pollution more than 5-10%. And second method is not widespread for the reason of loose huge number of grounds. During last years new compositional structure are developed by “Karvan L” company staff on the basis of surfactant species “LD500IF”. The reagent successfully passed work bench measurements on hydro-cyclone units and effectiveness of the feagent is 98 -99 % during expenditure norm 20-25 mg/l.
Stable development of our country directly depends on competitive ability of domestic products, which, in its turn, depends on quality control (i.e. level of testing labs). Specificity of analytic labs requires special system of their competitiveness recognition. Their accreditation synthesizes general approaches to accreditation of testing labs and peculiarities of analytic operations. In relation with it the actual is application of international standards: 1.management system of lab quality and application of standards 2. Lab-information systems in quality management system 3. Modern analytic equipment and automatization of separate processes in lab activity. Karvan-L” company lab repeatedly passed accreditation in Azerbaijan State Committee of Attestation, accreditation certificate No. AZ 031.01.11.02.49.07 dated on 14.03.2007. Lab possesses modern equipment for conduction of wide range of analysis in oil chemistry and oil-chemical and organic synthesis, as well as of initial products of synthesis. Particularly, Karvan-L” company lab is fitted by up-to-date machinery for quality control of oily acids, and initial raw material for production of paintwork materials based on pentophtalein, acryl, vinilcetate, polyurethane and etc. film-making clay compositions, driers, initial components of alkyds, acryl, and polyurethane enamels and emulsions, water and oil soluble inhibitors of corrosion, deemulsifiers, additions to oils, oil solvents, aromatic carbohydrates, processed oils and paints, plant oils, sewage of analogical production.
Petroleum Products, Fertilizers And Chemicals.
Petroleum refining is characterized by the largest amount of systems exposed to corrosion compared to any other sector of the oil industry. Corrosion problems occur everywhere, from the points of raw materials delivery up to removal and transportation of the refined products. Corrosion control measures shall be taken at crude oil distillation plants and units for alkali treatment of oil, gas plants, reformer and cracking units, straight run deisobutanizers, units for adsorption of hydrogen sulphide from aqueous solutions, furfural treatment units etc. Liquid composition may vary depending on a particular stage of the oil refining cycle – from sulphurous, acid oil-water mixtures fed to refineries to final products (e.g., gasoline) with negligible water content. It is hardly possible to use any “universal” corrosion inhibitor due to the variety of process mechanisms that may cause intense corrosion of equipment used in the oil sector. The need to ensure property package determining processability and compatibility of the inhibitor with corrosion medium components necessitates development of an inhibitor that would be functional in different corrosive conditions. Oilfield water containing large amounts of chloride ions, oxygen, carbon dioxide and hydrogen causes and promotes further development of local electrochemical processes, which represent the most dangerous type of corrosion and failure of metal. Oilfield practice shows that the most dangerous local corrosion damages also occur in the presence of microorganisms. In order to protect oil equipment against chemical and bacterial corrosion, Karvan-L company designed efficient and cost-effective water-soluble and oil-soluble corrosion inhibitors. Corrosion inhibitors are nitrogen-containing surfactants, produced based on natural acids with addition of film-forming admixtures and biocides.
Description IC series corrosion inhibitors a 98-100% active amido- or amino- imidazoline derived from naphthenic acids used to formulat corrosion inhibitors for use in drilling, production, transporting and refining of crude oil. Application Dissolved acid gases and biological deposits can cause severe corrosion to occur in oilfield water handling system. Corrosion by product such us iron sulfide, iron oxides and biological mass can cause plugging of downstream injection wells. Over a period of time, water system corrosion causes costly leaks and failures IC series corrosion inhibitors finds application for surfactants or corrosion preventives in all types of oil system. It can be used in concentrated form diluted for application. Advantages Concentrated corrosion inhibitor Effective in multiple applications Highly cationic amine compound Surfactant or corrosion preventive for oil systems Usage Optimum treatment concentration will vary depending on the specific application.
Petrochemical products:ldpe, hdpe, pp, pvc, pet, methanol, bitumen, etc, food industry:, lime juice, jam, pickle, tomato paste, saffron, carpet.
Pasta Divella, Flour Pizza Or Cake Or Bread, Tomato Peeled Rinascita, Extra Virgin Olive Oil, Pomace Olive Oil, Corn Oil, Riso Arborio Roma Originario Thai Sushi , Tomato Juice, Wafer, Biscuits, Snacks Artichokes, Mozzarella Cheese, Juice Fruit Skipper, Anchovies Fillet, Nutella, Candies, Coffee Lavazza, Tuna In Oil, Parmigiano Reggiano Cheese Dop, Prosciutto Crudo Parma Dop, Vinegar, Sugar, Milk Uht, Cheese Hard For Grating, Olives.
