All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units: Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; an oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; a stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products.
Is the solvent for lacquer materials as per GOST 3134-78. It is used for solution of oily paints, varnishes and enamels. It is clear unclouded liquid. Viscosity du is not more than 0,795 g/m. Boiling range: start of boiling not more than 1600C, end of boiling not more than 2050C. Closed flash point is not less than +330C. Aromatic hydrocarbon content not more than 16%. Sulphur content not more than 0,025%.
A technology that creates a dim surface and renders it grainy and non-transparent (an operation contrary to polishing). The dimming allows drawing a picture on a glass surface. The dimming is widely used in manufacture of glass and ceramic dishware, decoration elements, imitation jewelry, souvenirs, glass furniture and other glass items. Glass dimming methods can be categorized by five groups: dimming by mechanical treatment; chemical dimming; application of dimmed coating by firing; application of dim paint coats; other dimming methods.
Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol) is a compound with the chemical formula C3H8O. It is a colorless, flammable chemical compound with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether. It is used in the manufacture of a wide variety of industrial and household chemicals, and is a common ingredient in chemicals such as antiseptics, disinfectants and detergents.
Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol) is a compound with the chemical formula C3H8O. It is a colorless, flammable chemical compound with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether. It is used in the manufacture of a wide variety of industrial and household chemicals, and is a common ingredient in chemicals such as antiseptics, disinfectants and detergents.
Karvan L offer you aminoacids from organic acids. We offer you a unique organic plant food Power that has no analogues in the world. The quality is high and the prices are 2 times lower than the world market. Power- our product contains natural amino acids and amino acid esters, retains plant natural taste and aroma. Power is 100% organic. We don't use chemicals or sintetic substances. It does not contain chemical additives.
Naphtenic acids acids exudes from alkaline wastes after leaching distillates of diesel oil and kerosene naphtenic oils are effective stimulators plants growth. Oil growth substance is represent as water solution sodium salt of naphtenic acids 40%. (OGS) steep seeds before sowing use mixture with chemical fertilizers during vegetation for plant spraying in blooming period. Using the OGS grout concentration in water from 0, 001 to 0, 4 sharply to raise cotton productivity, winter wheat and other products. The OGS is supplied: 1. OGS increased growth (evolvement) of plants especially in initial stage and vegetation stage. Influence effect is depend on plant nature, soil nature, conditions and etc. 20-25% at a speed almost always rise, on the whole this indices are contained in interval from 20% ( it is was not lawyer) and it can exceed 100% over. 2. OGS increased crops productivity. In converting to productiveness from 1m2 in total due to increase speed and growth of yields quantity effect is very seemly. 40% 3. OGS sharply resistibility diseases and survival rate extreme conditions
Vinyl Windows and Doors An integral part of our company’s activity is the fabrication and installation of vinyl windows and doors. The doors can be of different models and types of opening. We fabricate and install windows and doors using the following profiles. The industry today is capable of producing vinyl, which is ideal for vitrification in all climatic conditions. The profiles for northern latitudes have thicker walls and partitions inside. The thicker is vinyl, the better its energy-saving ability. The number of chambers in such systems is three or more. The uniform width of vinyl frames enables to carry out glazing in conformance with windows and underline the design integrity. The door vinyl is decorated using the same materials and same technology as that for the windows. Which implies all items being of one color and style. The excellent noise insulation will allow you to enjoy a warm conversation with your friends. For now, the disturbing noise will not distract you from your pleasant home chores. Installing additional multifunctional glasses, you will enjoy a tender sunlight in the summertime and have a shield that reflects the heat back into your house in winter.
The all-glass enclosing structures of elevator shafts provide the main advantage of perceptible fragility and exquisiteness combined with guaranteed reliability and long life. The panoramic glazing of elevator shafts with architectural shutterproof glass (which is more commonly referred to as a panoramic elevator) has an advantage to conventional enclosed shafts. The main type of elevator shaft glazing Karvan-Glass apply is point glazing: glass is attached to the bearing structure made of stainless or construction steel using point fittings specially designed to compensate for dynamic loads that occur during operation of an elevator. In doing so, the maximum transparency is achieved. The versatility of elevator shaft designs using architectural safety steel is virtually unmatched among other materials. It ranges from full transparency which gives a panoramic view to passengers in an elevator through to modern photoprints on glass capable of embodying any designer’s concept. For instance, hidden glass fittings enable to create a solid structure that shares concept with the decorative glazing of walls.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 0.9-1.2 mm Item: dip Certification: iso9001 Color: black Standard: ohsas 18001 Specification: as your requirement Od: 12-20 mm Length: 36-40 mm (length of drip component) Drip flow rate: 1.5-4.0 (liter/hour) Distance between drip components: 190-1050 Packaging & delivery: Depends on your order. Description: After cleaning the mixture from sand, clay, water and algae, etc. With the help of special filters, water is transferred in drops directly to the roots of plants through drop irrigation pipes. Drip irrigation pipes can be used in any landscape terrain. Applicaton of this system allows automation of overall irrigation system, which in its turn facilitates to reduce the use of work force. Contrary to surface irrigation method, drip irrigation increases the efficiency factor higher than 95%. Application of drop irrigation components has several positive aspects: • Enables the fertilizer to penetrate with water • Enables maximum equal distribution of water and nutrients • Allows irrigating large territories simultaneously in small portions • As the ground between plants is dry, it prevents the grow of weeds that helps to facilitate pest control. • High pressure is not required in drip irrigation that reduces operating expenses.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 1.9-15 mm Item: polypropylene ppr pipesprotection rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 20-90.0 mm Type: pn-10, 16, 20 Length: as your requirement Packaging & delivery: Depends on your order. Description: Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Elbows 45,90 dgr., Tee T-Joints 90 dgr., Tee Reducing T-Joints 90 dgr., Pipe Caps, Reducing couplings, Flange Adaptor. Packaging & delivery: Depends on your order. Description: Cast fittings - pipe fittings are manufactured by molding of polyethylene (PE100) under pressure and temperature. Cast fittings are used in cases when you want to change the direction of tubing, tee off, or switch to a different diameter. A significant advantage of cast fittings is their relatively low cost associated with the ease of manufacture. Installation is carried out by butt welding, which reduces the financial costs because practically no consumables required at the same time relatively simple installation. Elbows, flange bushings, reducers, tees and caps, are used in gas and water pipes made of PE100 from 63 to 315 mm.
Application Solvent Applications, Chemical Intermediates, Pharmaceuticals, Acetone Feature IPA is produced by the direct propylene hydration process. IPA meets the diverse needs from solvent industry. Our division has been a stable supplier of raw materials for related industries. IPA is used for cleaning semiconductor wafer and LCDs. This highly value-added product has been enjoying rapid increase in demand in accordance with the development of such areas as information, communication and multimedia. High Purity We have high performance purification process to manufacture high purity IPA products. Our IPA maintains superior quality characteristics through products of high purity.
Application: used in production of lacquer materials designed for improvement of colouring agent wet-out and dispersion, increase of sedimentation stability of pigment suspension for 20-30%, reduction of light organic pigment flotation, dispersion time reduction for 30-50%. Due to surface activity and complete compatibility with different organic solvents, copper naphthenate is adsorbed on pigments, decreases discharge of main desiccants for 25-30% at the same time possesses activity synergism with Co and Mn, increases enamel coating firmness and reduces drying time to level 3. Trade dress: calcium naphthenate as a solution in white spirit. Appearance: unclouded homogenous light yellow liquid.
Karvan-Glass specialists carry out the vitrification of balconies and sunrooms using sliding aluminum and swing vinyl systems. If you plan a balcony vitrification, we suggest to select the profile (aluminum or vinyl), which requires comparing advantages of applied profile systems. Sliding aluminum systems represent the following advantages: practicability and usability; saving internal space; low weight; long life; affordable price. Swing vinyl systems represent the following advantages: high noise insulation; good heat insulation; long life; swing flaps ensure easy maintenance.
Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; a rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; An oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products. General Specifications: Installed power of the lines: 14 kW Rolling speed: from 8 to 12 lin m/min Accuracy of rolling along the length: ± 2 mm per 6 m Quantity of reduction mills: from 14 to 17 pieces Lifting capacity of the uncoiling machine: 7 tons (10 tons) Attendants: 1 person Maximum overall dimensions of the used roll: Width: 1,250 mm; Outer diameter: 1,600 mm; Inside diameter: 500…600 mm. Receiving stacker length: 6 m Space required to accommodate the manufacture of tile effect roofing (LxWxH): 30,000×10,000×4,000 mm. Working temperature range for equipment operation: from +2 to +40 o
Crude oil flowing from wells contain fair amount (often 20-30%, sometimes up to 60-65%) of water with dissolved salts from basis point up to 1-2%. This significantly increases viscosity of crude oil, generates stable emulsion and makes the oil inadequate for refining and transportation. Water produced together with oil is usually in very unusual state, i.e. it is spread in oil in the form of droplets (emulsified form). Less the size of droplets, more stable the emulsion. One of the main reasons of emulsion stability is also the presence of resin, pyrobitumen, paraffin, and other oil admixtures like glycerine, microcrystal of paraffin, ceresin in crude oil. These substances generate quite firm and thick (protective films) on the surface of water and solid particles thus preventing merging of water drops and solid particles and their spontaneous segregation from oil. At present physical, thermal, physico-chemical, electrical and combined methods of oil emulsion breaking are used for oil dehydration and oil desalting. One of the widelyused and most effective methods is physicochemical combined method using chemical reagents demulsifiers. Demulsifiers are substances with high surface activity. They are concentrated in interfacial areas of oil emulsion, break protective films covering solid particles, water droplets and neutralise their electric charges. After this, small droplets will merge into bigger drops under the influence of mutual attraction, loosen and segregated from oil.Oil demulsifying is carried out in oil field and oil refinery plants. At present “KARVAN-L” company tries to provide integrated work cycle: – development production supply and implementation of produced demulsifiers together with consumer. Demulsifier Karvan-200 is designed for oil dehydration and desalting in gathering system and oil treatment plant. Reagent can also inhibit corrosion processes.Demulsifier Karvan-201 is designed for separation of both light and heavy crude emulsion. This reagent is the composition of macroglycols and nitrogen-bearing surfactants in organic solvent environment Demulsifier discharge per 1 ton crude is 10-60gr. Dosage depends on emulsion stability, treatment temperature, water separation period and desired depth of oil processing. Optimum dosage and demulsifier application process ensuring necessary results can only be defined as per test results carried out in practical use sites.
Coolant - antifreeze KL-A40M" intend for using in cooling system of petrol engine and diesel engine internalcombustion engine of all types vehicle. It is preserve necessary for operating envelope of temperature from 400C to + 1100C. Coolant - KL-A40M characterized by high performance attributes and represents optimal composition first-class monoetylenglikol highpurity, demineralized water and by unique complex anti-foam additives and additives-inhibitors, which averted rust formation and metal corrosion (copper, steel, aluminium, cast iron, brass, solder). High-efficient additives antifreeze parcel KL-A40M provides cooling system protection from incrustation, corrosion, heightened depreciation, cavitation, prevent from rubber swelling. Product not carries phosphates, amines, nitrites.
Translucent structures represent a convenient, functional and stylish decoration of various types of buildings and facilities. They look pretty well with business centers, shopping malls, and administrative buildings. They boast a light and elegant appearance but still maintain a serious yet fine exterior. The translucent structures enable to save on artificial lighting as they let in more sunlight. These structures are built using highest quality glass panes, which renders them, even greater advantages, namely noise and heat insulation as well as power saving ability. Translucent structures are about filling both horizontal and vertical planes of a building or facility with glass panes above an aluminum façade. Glass facades from our company represent minimum costs with always-high quality and versatility of designer solutions, which is a decisive factor for most satisfied customers who have already chosen Karvan-Glass.
