Description CA-100FR is a low cost,gypsum-based, cementi-tious,spray-applied fireproofing product designed for and easy, fast application to steel and concrete substrates. CA-100FR incorporates application benefits including Graces patented injection technology for fast set and improved hangability. Use 1. High-rise and low-rise commercial office buildings. 2. Conventional buildings. 3. Hotels,resorts and casinos. 4. Health care facilities,sports centres. 5. Schools and museums. 6. Airport terminals. Feature 1. High bond strength. 2. Quick set in 15 minutes. 3. Resists damage from air erosion and abrasion. 4. Gypsum-based formulation contains no mineral fibres. 5. No topcoat or surface sealer required.
Description HYPERCOAT-568 is a single-component,high-strength water-based waterproof coating composed of modified copolymer, which has both waterproof and thermal insulation effects, and has good water resistance and weather resistance. Use â?¢ Bathroom, Balcony, Terrace â?¢ Roof (flat/sloping) â?¢ Floor seams, parapet â?¢ Suitable for old and new waterproof engineering made of acrylic or PU material. Feature â?¢ Can be used immediately after opening the bucket,easy to use, suitable for DIY users. â?¢ Good adhesion to cement. â?¢ Can be directly tiled or exposed directly after drying. â?¢ Good water and UV resistance, forming excellent weatherability. â?¢ After completely curing, the water-proof layer of the roof is walkable. â?¢ Can effectively block heat transmission. â?¢ Waterproof repair for new and old metal iron roofs.
CP-311 Hyperguard WPU is water-based polyurethane, waterproofing coating for roofs when mechanical durability and outstanding waterproofing properties are required. It forms a non-penetrating against moisture film with resistance to UV and mechanical stress. Ideal solution for waterproofing walkable roofs High mechanical strength Applicability and on cloudy days as the final polymerization of the material is done by evaporation, and therefore under shading No appearance of holes in the surface during the curing of material Protection of polyurethane foam insulation Certified with CE Eco-friendly (Water-based) Easy to apply Resistant to temperatures from -15 to 80
PREPARATIONS This product is waterproofing, heat insulated, breathable compound materials. It is made from versatility graded sand, lightweight aggregate, water-proofing resin and variety of additives. FEATURES * To retain waterproofing, heat insulated, breathable through one-time application. * With excellent adhesion, non-sagging and construction resistance. * Without cracking and bulging after curing. * Applying by manual and mechanical efficiently. APPLICATIONS * With painting and leveling on the indoor, outdoor and bathroom wall. * With painting and leveling on roofing insulation. * With painting and leveling on metal mesh. * To repair the surface of the roof ceiling.
DESCRIPTION HYPERCOAT-688 is the range of high performance, seamless, cold-applied liquid waterproofing membrane. CHARATERISTIC 1. Quick and easy to apply. Single pack, liquid applied waterproofing membrane. 2. Excellent hydrolysis resistance 3. Still can curing when apply on the moisture surface without observed water. 4. The middle layer of the tile, the top coating or each cement-based finished surface. APPLICATION 1. Indoor: Bathroom, kitchen & terrace 2. Outdoor : Roof, floor joint, parapet and wall.
DESCRIPTION HYPERCOAT-518 is a premium, semi-thixotropic, liquid-applied, highly permanent elastic, cold applied and cold curing, one component synthetic rubber membrane used for long-lasting waterproofing. HYPERCOAT-518 is solvent based, cured by reaction with ground air moisture. And itâ??s semi-thixotropic for use in sloped surfaces. APPLICATION â?? Concrete Roof, balconies, terraces and verandas â?? Wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms, etc. â?? Pedestrian and vehicular traffic decks â?? Green roofs, flowerbeds, planter boxes â?? For repair old bitumen felts, asphalt felts, EPDM and PVC membranes and old acrylic coatings. â?? Waterproofing and protection of concrete constructions like bridge-decks, tunnels, stadium stands, car parks, etc. Product properties â?? Long lasting performance with acidity and alkaline â?? Good resistant with oil, bitumen, wax â?? Strong adhesion with metal and concrete substrate â?? One component products, easy to apply and suitable for various tooling â?? Elongation more than 700%, tensile strength more than 70kgf/cm2, â?? Penetration strength more than 25kgf/cm2, tear strength more than 40kgf/cm
Description CC-105HD Duraflex is one component, eco-friendly, water-based topcoat membrane. Feature Resistant to exposed sunlight and chemicals. When applied, it forms as seamless membrane without joints. Product keeps its mechanical features over a temperature span of 40 to 90 Use Area Roof terraces balconies and verandas. Industrial floor coatings. Stones, marble and ceramic surfaces Coverage. Consumption of each layer: 0.1.5-0.2.5 kg/m2. Minimum two coats should be applied. Total consumption: approx. 0.3-0.5 kg/m2. Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded.
* TYPEï¼? Milky White VAE/Acrylic Copolymer Emulsion. * APPLICATIONï¼? Roof * CHARACTERï¼? 1. Environmental friendly water-based paints, safe and non-toxic. 2. Good workability because of high compatibility with cement and aggregate. 3. Excellent elongation and tensile strength to protect the cement surface. 4. High performance waterproofing application. 5. Fast setting/drying speed and enhanced water resistance. 6. Easy to paste tiles, paint or apply protect slurry layer. * VISCOSITYï¼? 1000~3000 cPs (LVT 3/12 rpm, 25 â??)
Product Description Oxidized bitumen is high quality, general purpose oxidized bitumen for various applications. Uses Foundation damp-proofing Built-up roofing systems. Roll and pour application of bitumen felts. Bonding of SBS modified membranes by hot mop method. Sealing of laps and joints of various bituminous felts and membranes. Wet area waterproofing. Bonding of wooden boardsâ?? insulation panels. Road resurfacing and repair. Application Heat the drum until the oxidized bitumen starts melting at approximately 130Deg.C. Apply by roller. Squeegee or direct rolling to an average rate of 1Kg/sq.m. For hot mop application. The membrane should be applied while pouring to avoid re-cooling. Packing In steel drum(180KGS) In SEALEDBAGS(25KGS/40KGS)
Description CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface. Feature Resistant to UV, exposed sunlight and chemicals When applied, it forms as seamless membrane without joints Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius Use Area Roof terraces balconies and verandas Industrial floor coatings Stadium, car parks Stones, marble and ceramic surfaces Coverage Consumption of each layer: 0.1-0.15 kg/m2 Minimum two coats should be applied Total consumption: approx. 0.2-0.3 kg/m2 Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded
Feature: Reinforcement of Waterproof High heat insulation Good quality and dust resistance Water resistance and high weather durable. Drying faster and easy application. Application Cement wall Galvanized steel Color pre-painted steel Plywood Plastic wave-board Lime-wall The coverage will be affected by substrate dimension and application method. The loss factor as follow - Brush= Theory coverage X1.4 Spray= Theory coverage X1.7
DESCRIPTION CP-311T elastic polyester is a new type product with a special polymerization. It is a one compound high-performance elastic waterproof membrane. The single-liquid self-crosslinking waterproof polymer with anti-fouling and wear-resisting properties is used for the coating and protection of elastic waterproof materials, roofing, wall and other elastic materials. This product has high adhesion, elasticity, wear resistance and protection. It is water-resistant, weather-resistant and hydrophobic. It is the best choice for long-term protection. SPECIFICATIONS 1. AppearanceWhite Emulsion 2. Solid Content48~52 % 3. Viscosity3000 ~ 6000 cps(RVT#3@25) 4. Proportion1.15~1.25 PROPERTIES Developed with an environmentally friendly formulation that is water-based, non-toxic and low-odor, in line with environmentally friendly low VOC regulations and CNS waterproofing specifications. The self-crosslinking single-liquid resin can make the construction work simple, and can be directly sprayed, rolled or brushed. Suitable for indoor, outdoor, floor and wall applications with high toughness, water resistance and wear resistance Excellent film properties: elastic value and stretchability, and excellent wear resistance Weathering, aging resistance, can effectively increase the life of the paint Excellent adhesion, breathability and foam resistance, which can effectively prevent surface blistering and false after application.
Stationery for schools and office purpose, craft products, eva foam sheets, stationery glues, white glues, silicone glues, industrial glues, ball pens, fountains pencils, stapler, customers indicated items.OEM, export products
DESCRIPTION Cement Filler is used for exterior coating on the tiles, steel plate, a smooth surface or a low porosity material to combine the old surface and the new one. FEATURE * Water-based formulations of two special adhesive. * For tiles, steel, a smooth surface or a low porosity of the material surface ?¯ etc. * With waterproofing, impervious, weather resistance, freeze-thaw characteristics. * Can be used both on wet and dry surfaces. * With good adhesion. APPLICATION * To adhere and mix old concrete surface and new concrete surface * Can be used to adhere indoor and outdoor old cement walls, fiber cement board, tile, concrete, colored steel board, asbestos and various green compartment plates etc. WORKING PROCEDURE 1 All surfaces need to be clean, free from dust, rust, white birch and either grease. In addition, the concrete could be moistened but not with floating. 2. Coating CA-003M by brush, roller or spray on the substrates. The coverage would be 4 ~ 7m ² per kilograms which depends on the situation of porous and roughness of the substrates. 3 All the tools can be cleaned by water.
Description CS-613 is a multipurpose water-based epoxy sealer/putty/adhesive. Itâ??s developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. Itâ??s easy to mix even by hand due to our innovative water-based technology. Features / Benefits *Paintable easily with water-based coating; can be painted after 1 day without work delay hence reduce time and save money. * Easy to use: Compatible with damp surface, time is saved in waiting for it to dry up; Washable with water including tools. Best to wash as soon as possible before it hardens. * Smooth to tool with trowel; Non-sagging characteristic making it easy to use on vertical wall and ceiling. * Stronger adhesion due to higher amount of binders used. * High solid by volume; 100% water resistant when cured. * Low odor/ solvent free/ VOC free, it does not pose health hazard to user and dwellers.
CC-402 is a one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C. CC-402 complies with the requirements of EN 1504-2 as protective coating. CC-402 is used for protection and enhancement of concrete structures (normal and lightweight concrete),especially exposed outdoor concrete surfaces with a risk of cracking CC-402 is used with concrete repair works as an elastic protective coating on AFTEK smoothing mortar (refer to product / system data sheet), fiber cement and over coating of existing soundly adhering coatings. Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9) Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9) Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9) Crack-bridging even at low temperatures (-5°C) High diffusion resistance against CO2 reducing the rate of carbonation Water vapour permeable Very good resistance against weathering and ageing Environmentally friendly (solvent free) .Reduced tendency to dirt pick up and contamination.
DESCRIPTION Non-Skinning sealant is a one component, non-drying polybutene rubber based mastic. It does not harden but rather remains permanently soft and paste-like. Non-Skinning sealant has excellent resistance to water vapor transmission. FEATURES * Permanently non-skinning * Low shrinkage * Moisture resistance * Excellent adhesion USES * It is suitable for all kinds of plastics, metals, glass, masonry and timber. * It can also be used in installation of cool rooms and prefabricated construction. LIMITATIONS * It should not be applied in exposed joints where dirt pick-up and hand contact. * Not for: Used in areas subject to considerate dynamic stress. * Not for: Mobile homes, truck bodies. COLOR White, almond other colors are available upon request. APPLICATION * Surface must be clean and dry. * Cut nozzle to desired size. * Insert cartridge into caulking gun. * Push sealant ahead for uniform bead. * Clean off excess sealant with kerosene or mineral spirits. CAUTION Use appropriate personal protection to avoid contact with skin and eyes. In case of eye contact, flush with copious amounts of water for at least 15 minutes and get medical attention. In case of skin contact, wash affected areas with hand cleaner followed by soap and water. For further information, please refer to Material Safety Data Sheet (MSDS).
DESCRIPTION Hydrostatic press stone filmless maintenance agent is a maintenance hybrid comprised of a special kind of Oligomer Silsesquiloxane mixed in a water-based solution, formulated with powerful surfactants attributing to its excellent-resistance properties and a non-yellowing methyl silane hybrid, which reacts with the moisture and CO2 in the air, forming a nonsolvent based resin that penetrates into the substrate heightening its water proofing ability. Its ability to penetrate deep into the concrete, as deep as 3~5m/m, distinguishes it from other products on the market. Moreover, it can cause a chemical reaction with alkaline materials that produces crystals inside the concrete, that can fill and block the micro-vein within the concrete so as to reach the waterproof effect in depth; thus, the longevity of the building can be extended. APPLICATION Water, anti-pollutants and anti-weathering resistance for various surfaces such as: tiles, gaps between tiles, terra cotta, calcium silicate board , plasterboard ,bricks,concrete, natural and process stone, stone carving, stone washing, stone smoothening, stone cutting,sidewalks, parking plywood. ADVANTAGES * Highly active molecule that is eco-friendly, water-based and inorganic produces strong adhesive to the substrate after chemical cross-linking. * High permeability and excellent durability. * Non-yellowing, no stain contaminated, dirt can be easily washed off with water from rain or washing walls. * Excellent water repellent ability (the so-called Lotus effect) can effectively prevent from water permeating. * It is suggested to apply new coat regularly every three years; thus it can continue to maintain water-repellent and anti-pollutant functions.
DESCRIPTION ITLS PMS 60 is a single component elastomeric sealant without isocyanates. It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials. APPLICATION ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications. ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand. INSTRUCTIONS FOR USE SUBSTRATE PREPARATION: The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand. They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates. It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing. When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer. CAULKING: ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing. CLEANING: Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary. STORAGE AND SHELF LIFE 12 months in the original, hermetically sealed packagings between 5 and 25 C PACKAGING 290 mL cartridges and 600 ml sausages SAFETY Not classified as hazardous. Read the material safety data sheet before use.
DESCRIPTION ITSEAL is truly developed for sealing window frames with highly durable and flexible properties to withstand severe weathering and extreme temperatures. It seals small gap that normal sealant cannot reach and penetrate. It provides a truly watertight seal deep into minute joint and gap. FEATURES * ITSEAL is the only waterproof sealer that is completely watertight. * It is highly water repellent that no water can get through it during storm. * It adheres well on aluminum and glass * Once dried, ITSEAL is flexible and accommodate joint movement due to vibration. * Mill finish aluminum, oil or wet surfaces can also be well-sealed. VOC CONTENT Type of Regulated Adhesive under the Air Pollution Control (Volatile Organic Compounds) Regulation of Hong Kong: Architectural Sealant VOC Content (Ready to use): 248g/Ltr. SURFACE PREPARATION For maximum adhesion, the adhesive surface must be free of dust, release agent, oil and grease. Wipe surface with solvent is recommended. Solvent are obtainable from ITLS-SB. This information in this catalogue is provided to the best of our knowledge from results gathered both internal and external credited laboratories. However, we have no control over site applications, site conditions and workmanship of the applicator. We therefore will not accept any liability, either directly or indirectly arising from the misuse of these products or when the product is used not in accordance with any advice, specification, and recommendation of information given by us, The user is responsible for checking the suitability of these products for its intended use. APPLICATION ITSEAL can be used with hand operated or air operated grease pump. Other simple extruding device can also be used but it has to be solvent resistance. LIMITATION * Not suitable large gap wider than 5 mm wide and deep. For deeper joint fill to half of it, let it dry overnight and fill it up the next day. * Not suitable for use as expansion joint. COLOUR AND PACKING 26 kg / pail Grey/Black/Bronze/White SAFETY INFORMATION * ITSEAL is flammable. Please keep away from sources of ignition during application. * Avoid breathing in solvent by wearing solvent vapor respiratory mask in badly ventilated area or confined space. * Avoid contact with skin and eyes. If swallowed please contact doctor immediately. * ITSEAL meets the requirement of RoHS regulation of European Union and it does not contain eight heavy metals which were restricted by ASTM F963 or EN71 part3. * Please read the Material Safety Data Sheet in regards to flammability and health and hazard. SHIPPING/STORAGE INFORMATION ITSEAL must be stored in a cool place under 25°C and away from direct sunlight. The shelve life is 12 months if stored in accordance to the recommendation. Dangerous Goods Information: Cement Adhesive, Class 3, UN1133 PG III.
