Description CC-401 is a water based reinforced with acrylic polymers and graded fillers primer for concrete and masonry surfaces in order to improve adhesion between the substrate and subsequent coats. Appropriation For Rockflexï¼?RCï¼?Masonry System Characteristics Ready to useï¼?Easy to apply Improves adhesion Improves the finish of topcoat Non-toxic Surface preparation: Concrete substrate shall be dry, sound, clean and uncontaminated. All loose particles, curing compound, shuttering oil, debris etc shall be removed. Temperature Condition: Ambient temperature shall be between 10 and 50 °C Application: CC-401 is applied at 4 - 6 m2/ltr depending on substrate porosity and allowed to cure for 2 to 4 hours at 25 °C before over-coating with Rockflex systems Cleaning: Clean the tools with water immediately after use. Packing and Storage CC-401 is available in 20 ltr pack and it shall be stored in cool, dry and shaded warehouses. Shelf life is 12 months when stored under cover, out of direct sunlight, protected from extreme temperatures and as per manufacturers recommendations. In extreme tropical climate, the product shall be stored in cooled ambience. Excessive humidity and over exposure to UV will result in the reduction of shelflife.
Description HYPERCOAT-568 is a single-component,high-strength water-based waterproof coating composed of modified copolymer, which has both waterproof and thermal insulation effects, and has good water resistance and weather resistance. Use â?¢ Bathroom, Balcony, Terrace â?¢ Roof (flat/sloping) â?¢ Floor seams, parapet â?¢ Suitable for old and new waterproof engineering made of acrylic or PU material. Feature â?¢ Can be used immediately after opening the bucket,easy to use, suitable for DIY users. â?¢ Good adhesion to cement. â?¢ Can be directly tiled or exposed directly after drying. â?¢ Good water and UV resistance, forming excellent weatherability. â?¢ After completely curing, the water-proof layer of the roof is walkable. â?¢ Can effectively block heat transmission. â?¢ Waterproof repair for new and old metal iron roofs.
Introduction Bentonite Mat are consisting of three different layers supported by geotextiles and/or geomembranes, mechanically held together by needling, stitching, or chemical adhesives. A Bentonite Mat construction would consist of two layers of Bentonite Mat stitched together enclosing a layer of natural or processed sodium bentonite. The engineering function of a Bentonite Mat is containment as a hydraulic barrier to water, leachate or other liquids and sometimes gases. Typical Applications Includes Ponds and stormwater impoundments: Bentonite Mat are widely implied in sewage reservoir, storage ponds, and regular reservoir. The Bentonite Mat does not require specialized machine nor skilled workers, which makes it a great material for ecological pool protection. Landfill liner : Bentonite Mat can replace the clay layer of geosynthetic membrane compound system, offering less systematic leakage rate. For a better result,combining with geosynthetic membrane is recommended. By doing so, when the geomembrane is compromised, the Bentonite Mat can still work for its purpose. Anti-leakage of gas or oil depot:Due to the ease of application and great toughness, it is the most economic and reliable choice of leakage protection for oil or gas depot. Landfill cap: Using the Bentonite Mat are widely adopted in different countries, for the damage and crack effect of uneven subsidence, desiccations, and dampness are drastically less than ordinary clay layer. Hence, the Bentonite Mat are extraordinary suitable for landfill cap. Underground project waterproofing: The protruding thin fibers of Bentonite Mat surface can lodge in concrete and served as an anchor. When the subsidence occurs, the small anchors would prevent the Bentonite Mat and structure from forming a water intrusion interface.
MP is an easy to use 1 component oxime type silicone sealant which there is pungent smells less and little corrosion as a multi-purpose silicone sealant. It may be used for various construction parts including windows and glasses because of excellent weather-proofing, durability, adhesion, and construct ability. Use Window and frame joint sealing Glass, mirror, and Al sash sealing **Always test adhesion to substrate before starting project Feature 1 Component Type Silicone Sealant Neutral Curing Type Excellent adhesion to various materials without any primer Easy to use as one component and room temperature curing type Easily squeezable for convenient work Good weatherproofing and durability Advantages Good adhesion to various materials like PVC , metal panel , and glass Excellent weatherproofing Non Slump Packing / Color 300g Plastic Cartridge Type Packing (transparent) 400g Plastic Cartridge Type Packing (other colors) 25 ctg / Box
2K PU Waterproofing membrane Description The product is good for weather resistant, adhesive and yellowing resistant. It mainly use for courts top coat and drawing. Well adhesion to RC, metal, and wood. Features 1. Good adhesive. 2. Well weather resistant. 3. Well wear-resistant and water-resistant. 4. Its a kind of a protective paint. Use for protecting metal, wood from rust. 5. Coat for drawing. Coating Methods Use brush, spray or wheel to daub in uniformity by twice.
DESCRIPTION CS-501 is our key, the range of high quality, high performance and elastic sealant. APPLICATION & FEATURES 1. Normal partition walls, brick walls, concrete walls, and wood compartments are filled with joint. 2. Small pit filled. 3. Good adhesion to cement wall, brick, wood and porous substrates. 4. Excellent elasticity to avoid the cracking on the seams. 5. Well durability. 6. Excellent elasticity to avoid the cracking on the seams 7. Paintable, without peeling and good workability. 8. Green and low pollution. PACKAGE & TOOLS 300ml / cartridge Cartridge gun, Manual or Trowel
Professional Caulking Gun 15 *600ml *For 600ml capacity *Aluminum tubular sealant holder *Black aluminum casting trigger & handle , swivel *With attachments for sachet (sausage) pack silicone 1 pc tube nozzle(250TN) 1 pc push disc (250 PD2) *Each in PE bag *10 psc /ctn/10.8kgs/1.39cft
DESCRIPTION CP-320 is a fast-curing, two-component, bitumen-extended polyurethane fluid. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. FEATURE Components easily mixed, fast curing Its low modulus gives it excellent substrate crack-bridging properties Excellent adhesion on almost any surface Excellent thermal resistance, max service temperature 80 Resistance in the cold: Film remains elastic even down to -40 Good chemical resistance Can also be used as a joint sealant APPLICATIONS Bathrooms, balconies, basements and rooftop Gypsum and cement boards Light roofing made of metal or fibrous cement Non-potable water tanks Bridge platforms Cut-and-cover tunnels Irrigation channels PACKAGING A : 20LT B : 20LT
Description CA-100FR is a low cost,gypsum-based, cementi-tious,spray-applied fireproofing product designed for and easy, fast application to steel and concrete substrates. CA-100FR incorporates application benefits including Graces patented injection technology for fast set and improved hangability. Use 1. High-rise and low-rise commercial office buildings. 2. Conventional buildings. 3. Hotels,resorts and casinos. 4. Health care facilities,sports centres. 5. Schools and museums. 6. Airport terminals. Feature 1. High bond strength. 2. Quick set in 15 minutes. 3. Resists damage from air erosion and abrasion. 4. Gypsum-based formulation contains no mineral fibres. 5. No topcoat or surface sealer required.
IT-6600 is an easy-touse water repellent, using silane grafting (or coupling) technique to form water-crosslinked property. It is a non-solvent based resin that penetrates into the substrate heightening its waterproofing ability. Use as a protective coating on porous, water-resorbing surface like ceramics, bricks, tiles, timbers...etc. To prevent powdering, weathering effect on concrete walls Surface waterproofing and leak-prevention apply on internal/ external walls, stones, tile surfaces. Excellent weatherability and waterproofing properties, due to silane grafting (or coupling). High permeability because of the semi water soluble, small diameter of the particles. Ideal to apply on non-organic, porous substrates due to the excellent water-tight property.
PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
1.High solid content 50% 2.Has high transparency,low fluidity and slump 3.Can be extruded easily in winter(about-15°C) 4.Can stick Metal, Timber, Concrete and other building material 5.VOC free versions are also available, using VOC exempted solvent.
DESCRIPTION AFTEK PU 25 is a one component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity to form a tough and flexible seal joint with excellent movement performance. AFTEK PU25 performs excellent adhesion on most building materials with proven weather resistance against UV, Ozone etc. APPLICATIONS Precast façade unit sealing Light weight cladding panel Construction expansion joint Window, door flame perimeter joint Natural stone joint sealing Ceramic joint sealing Various building material joint sealing, ie. fiber glass, rigid plastic, etc FEATURES One component, ready to use High movement accommodation +/- 25% Can be over paint Non toxic, sag, staining One component ready to use Excellent weather resistance Prime less for most substrates
Flexible Multi-Purpose Hybrid Polymer Sealant Description AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time. AFTEK FLEX-PRO MS is free of solvents, isocyanates,silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates; It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc. and it is compatible with most of paint systems. It has very good UV resistance property that can be used for interior and exterior applications.
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
CP-311 Hyperguard WPU is water-based polyurethane, waterproofing coating for roofs when mechanical durability and outstanding waterproofing properties are required. It forms a non-penetrating against moisture film with resistance to UV and mechanical stress. Ideal solution for waterproofing walkable roofs High mechanical strength Applicability and on cloudy days as the final polymerization of the material is done by evaporation, and therefore under shading No appearance of holes in the surface during the curing of material Protection of polyurethane foam insulation Certified with CE Eco-friendly (Water-based) Easy to apply Resistant to temperatures from -15 to 80
DESCRIPTION CS-106 Winshield is a specially formulated copolymer protective coating used in place of windows frames, glass, bathtub, plywood, plastic faced formwork, moulds prior to casting concrete, to ensure a clean release and protective purpose. FEATURES Do not corrode glass, plastic or equipment Minimize subjects cleaning Cost effective Apply on plywood, timber, steel, glass and plastic faced Non-staining, Non toxic, non hazardous Water-based and environmentally compatible
Description Self-adhesive membrane is high-strength PE based,combined with bitumen layers, forming rigid copolymer waterproofing sheets with high endurance. Use 1.Foundation and basement waterproofing 2.Flooring,roof deck waterproofing 3.Interior and exterior walls 4.Tunnels,reservoirs,sewage treatment tanks Feature 1.Easy apply, no torch equipment required 2.Self-adhesive,fast and easy application 3.Can combine with the structure as a whole, therefore prevent vapor transmission and expansion Series Product CP-107/Gravel,PE/Thickness : 2/3/4/5mm CP-108/Sandstone/Thickness : 2/3/4/5mm OP2100/PE/Thickness : 1.5mm XOP2101/Aluminum foil Layin plastic mesh/Thickness : 1/2/3/4mm XOP2102/MuLTILAYER PE& Aluminum/Thickness : 1/2/3/4mm
AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time. AFTEK FLEX-PRO MS is free of solvents, isocyanates, silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates. It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc. and it is compatible with most of paint systems.It has very good UV resistance property that can be used for interior and exterior applications.
PREPARATIONS The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease, without laitance and loose particles. Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water. MIXING Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water based on the condition of stirring and keep stirring around 5 minutes until grouting well. APPLICATIONS Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to escape. Suggest to blend the grout by auto-mixer for better application. COVERAGE 25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid Grouting Mortar. ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
