Chemicals.
Chemicals.
DESCRIPTION ITLS PMS 60 is a single component elastomeric sealant without isocyanates. It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials. APPLICATION ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications. ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand. INSTRUCTIONS FOR USE SUBSTRATE PREPARATION: The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand. They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates. It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing. When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer. CAULKING: ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing. CLEANING: Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary. STORAGE AND SHELF LIFE 12 months in the original, hermetically sealed packagings between 5 and 25 C PACKAGING 290 mL cartridges and 600 ml sausages SAFETY Not classified as hazardous. Read the material safety data sheet before use.
DESCRIPTION CA-055 is an emulsion primer of water-based acrylic resin with excellent properties such as water resistance, pull-off strength and pore-filling ability etc. , especially used to improve the physical properties of cement. It can be mixed with water at any ratio. FEATURES Excellent penetration into the concrete substrate to increase pore-filling ability and adhesion. Reduced transport paths of concrete structure to enhance durability. Excellent water resistance. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As cement grout additive. As water-based primer. For making two component tile adhesives. As adhesion aid for skim coat materials. PACKAGING 5 gallon Plastic Pails FLAMMABILITY Being water-base, it is non-flammable.
Description CP-121W(14) is suitable for new and old concrete floor with resistance and waterproofing ability. It has ability to penetrate in concrete, plaster or the surface of the stone for the building and to reach waterproofing. * Able to apply on the damp surface * Odourless and eco-friendly * Excellent resistance ability of negative water pressure (Comply with CNS1232. CNS10460. ASTM E96-12 B) * Enhance adhesion strength Properties * Leaking stoppage from basement inner wall * Waterproofing on negative water pressure * Anti-seepage for underpass, tunnel and water tank Application 1. Clean the surface to be free from loose particle, dirt and oil. 2. 3 options for application
Chemical Formula: H2NSO3H CAS No.: 5329-14-6 Appearance: White Crystal Packing: 25kg bag, 500kg bag, 1000kg bag Product Origin: Taiwan Specification: Sulphamic Acid: 99.8% Min. SO4: 0.02% Max. Fe: 5 ppm Max. Heavy Metal: 5 ppm Max. Moisture: 0.05% Max. Application: Widely used as an efficient descaling agent / cleaner / rust remover for machinery, as chlorine stabilizer in swimming pools and cooling towers, as pH adjustment for dyeing and other systems, etc.
Dyes, chemicals.
Fine chemicals.
Chemicals.
1- Made of soft vinyl frame and high impact resistance polycarbonate lens 2- Also used as chemical splash goggle 3- Lens with or without anti-fog coating. 4- Allow to use with prescription glasses. 5- Color: Clear 6- Standard: CE EN166, ANSI Z87.1 7- Suitable for chemical factories, hospitals (flu), laboratories and painting houses where requires indirect ventilation on the goggle to get full protection to the eyes. 8- Also allowed to use as high impact goggle which is recommended for light-duty works such as gardening, cleaning and cutting etc.
DOTP, PVC plasticizer, 2-ehs, 2-ethyl hexyl stearate, , ester for lubricant, polyethylene glycol ester , emulsifier and dispersant for textile CDE-G , ester for detergent, span-2080, emulsifier for water cutting oil and textile oil.
Textile Chemical, Leather Chemical.
Dicumyl peroxide - 99%dcp.
Dcp, chp, ptsa.
Varnish, ECH, potassium carbonate.
Bisphenol-a ethoxylates, bisphenol-a propoxylates, 2-methyl-1, 3-propanediol, polyethylene glycol alkyl ether, evoh resins, acrylate mononers.
L-lactide, dl-lactide, glycolide, poly(l-lactide), poly(d, l-lactide), poly(l-lactide-co-glycolide), poly(dl-lactide-co-glycolide).
Calcium phosphate.
PVC (carbide and ethylene base), dop, dinp, didp, doa, meg, pta, pet chips (bottle and fibre grade), nylon 6, hdpe, ldpe, lldpe,pp (homo and copo), mea, dea, tea, acetone, maleic anhydride.
Dcp 99% - dkcumyl peroxide Chp - cumene hydroperoxide.
