Product introduction This product conforms to the national standard gb1094.1-2013 power transformer and GB / t6451-2015 three phase oil immersed power transformer technical parameters and requirements.� This product has adopted a series of major reforms in material, technology and structure, so that the electrical performance of the product can reach the advanced level of similar products. With the characteristics of high efficiency and low consumption, it can save a lot of power consumption and operation costs, and has remarkable social benefits. It is a new product promoted by the state. It is also one of the more popular products for users.
66KV series product line has found a far-flung avail not only in agricultural grid modification within urban and rural areas, but also in industrial or mineral enterprises. Till now, the corporation has formed its series and commercially scaled production and the product line runs well and thereby is highly appraised by our popular users. ã??ã??The transformer body is reliably positioned for ensuring that no dislocation occurs with the transformer and no deformation occurs with the windings during long-distance transportation or during long-term operation. Without the need of core suspension and being maintenance free, this product line may be used just via direct grid connection
This standard is applicable to three-phase double winding oil immersed power transformer with voltage class 35kV, rated capacity 50 ~ 31500kVA and frequency 50Hz. Â This standard is not suitable for dry and damp heat belt type power transformer and power plant, transformer substation own three phase power transformer.
Our produced 110KV series product line has formed a standardized colony, with its versions developed from former 9 versions to present 10ã?�11 or 13 versions. Furthermore, new product versions with a self-cooling configuration, with an air-cooling & maintenance-free configuration, and with a no-core-suspension configuration have been released into the markets. In featured performance, the product line is core suspension free on site, highly efficient and energy saving, high in impedance, low in loss, in noise, in temperature increase, and in local discharge, i.e., â??1 free, 2 highs, and 4 lowsâ?�. This product line may satisfy market demands requiring high power supply quality, low losses and low noise, and a long interval between overhauls.
Valves applied in water, oil & gas, such as butterfly valve, ball valve, gate valve and other valves.Shipping
1. Design std.:API 6D 2. Pressure rating:Class 150~Class 1500. 3. Material: WCB, Stainless steel and other materials. 4.
1. Design std.:API 6D 2. Pressure rating:Class 150~Class 1500. 3. Material: WCB, Stainless steel and other materials. 4.
1. Design:API 609; 2. Pressure Range:Class 1500~Class 1500; 3. Size range: 2"~48" 4. Material: WCB, Stainless steel or customized.
Oil Resistant Conveyor Belt Price Range:$ 136-376 Minimum Order Quantity: 10 square meters Processing Cycle: 3 days for finished products, 15 days for customization Delivery Method: nationwide logistics distribution, door-to-door delivery. Delivery Time: 3-20 days Oil Resistant Conveyor Belt in work will often contact and transport some materials containing grease, and the grease itself has the characteristics of swelling and erosion, If the belt does not have oil resistance properties, then the grease will make the surface colloid volume expansion, structural relaxation, mechanical properties decline and working life shortened.Therefore, when conveying greasy materials, a special conveyor belt with good oil resistance is required.
Model:kv-05 Oil consumption:3-5l/h Output power:35.5-59kw Max.Output heat:20, 000-50, 000kcal/h (80, 000-200, 000btul/h) Outside air compressor:1 unit outside ac is needed about 0.3-0.5cbm/min(5-9l/s) Nozzle:brass siphon 1*1.0mm Tube diameter:114mm Heating pipe:1.0kw Motor power:180w Power supply:220v 50hz/110v 60hz Package size:58*53*42cm G.W.:30kg
Conveyor belt bearing, grease rubber accelerator.
We manufactures various drilling rigs (1000HP¡«3000HP), incl. AC variable frequency, DC motor, mechan-electric, and mechanical driven rigs. The Company has the capability of design, manufacture, and final assembly (commission) of complete set of rigs and provides our customers with comprehensive solutions & service of complete set of rigs to ensure them receive the highest quality oilfield products and services. * This kind of DC driven rig is available in four models. 1000HP ZJ40/2250DZ 1500HP ZJ50/3150DZ 2000HP ZJ70/4500DZ 3000HP ZJ90/6750DZ Notes : DZ-Drilling rig driven with D.C. motor; * This kind of AC variable frequency driven rig is available in four models. 1000HP ZJ40/2250DB 1500HP ZJ50/3150DB 2000HP ZJ70/4500DB 3000HP ZJ90/6750DB Notes : DB-Drilling rig driven with A.C. motor with frequency converter. Basic parameters of this kind of rig are in accordance with SY/T5609-1999 Type & Basic Parameters of Oil Drilling Rigs: * DC driven rig adopts international advanced AC-SCR-DC power system, realizing the stepless speed regulation for drawworks, rotary table and mud pump to obtain better drilling performance. * AC variable frequency rig uses VFD and digital control technology, simplifying drawworks construction and enhancing drilling performance. * Main components are manufactured in conformity with API Spec and applied API monogram on them.
This kind of rig is available in three models. 1000HP, 1500HP, 2000HP. The drilling rig is driven by diesel engines, hydraulic coupling & chain compound box or diesel engines, reducers & narrow V-belt, which provides smooth mechanical power to the drawworks. A number of hoisting speeds and rotary speeds are available. Main mechanical parts are in conformity with API Spec and applied API monogram on them.
This kind of rig is available in four models 1000HP, 1500HP,1500HP, 2000HP. Power: three-(or four)-diesel-engine (2000 or 3000 series) linkages, which are connected with couplers and reducer casings. * The drawworks and the mud pump are mechanically driven. The rotary table is independently driven by an AC/DC variable frequency motor. * Easy installation and better sealing as a result of taking an integral chain box or V-belt compound transmission unit. * The drawworks is equipped with the grooved drum and shifting a gear for it is carried out by air cylinders. The hydraulic disc brake is regarded as main brake and the eddy current brake as auxiliary brake. * The rotary table is driven independently by AC variable frequency motor and can accomplish stepless speed regulation with 0~210r/min. AC is supplied by an auxiliary generator set. * Main mechanical parts are manufactured in conformity with API Spec and applied API monogram on them.
This kind of drawworks is available in four models JC40DB JC50DB JC70DB JC90DB On the drum there is a spiral groove. Auto feed driller is available. The hydraulic disc brake is regarded as main brake. The brake disc is water or air cooled. The auxiliary brake is of AC motor dynamic braking. Single-shaft drawworks.
There are seven models available F-1300,F-1600,3NB500C,3NB1000C,3NB1300C,3NB1600 ,LN1600H. F Series Mud Pumps: The power end: The housing is of welded steel-plate construction. It is stress-relieved after welding. The pinion shaft and the gear are herringbone gears with recess, which allow smooth operation with high efficiency and long life. The crankshaft is a one-piece steel casting. The power end is splash and pressure lubricated. The fluid end: The valve seat, the liner, the suction and the discharge flanges conform to API specifications
Low-medium pressure lines, general purpose applications. Oil resistant synthetic hose One high tensile steel braid One textile braid Abrasion and weather resistant synthetic. Wrapped by transparent poly stripes.
Water valve
Xanthan is fine powder xanthan gum produced by fermentation of carbonhydrate with xanthomonas campestris . It is suitable for use in food, pharma and cosmetic preparations as a stabilizer, thickener or emulsifier. Cardboard drums or multiply paper bags of 25kg net.
Stainless, carbon steel, petro equipment.