Salient Features Special multi head weigher control with load cell & stepper motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive-through servo motors and control cards Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC controlled via servo motors and control cards Multi head weighing system for accurate dosing. Independent temperature controller for both seal Jaw's security devise to protect the operator of a machine Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Potato Chips, Rice, Macaroni, Beans, Snacks Pasta, Dry Fruits, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight of products. Technical Specifications Output Quantity: 15 g - 1000 g 30 - 85 Packs/min Filler Accuracy: ± 5 gm to 5 g Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 225 mm x 350 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 40 to 120 microns Film Reel: Core Diameter 76 mm & Reel Diameter 300 mm max Electrical Requirement: Input Supply: 220 or 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 3.5 KVA Peak Power Rating: 3 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2438 mm Weight: 700 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Pneumatic Magazine Shaft Optional Film End Sensor UV sterilisation of packaging film Special impulse sealing jaw Bucket elevator Platform English Folding System Extra Conformer for different sizes Air release system Linear weigher
Salient Features Special volumetric cup dozing system control by special gear motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing, Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through gear and servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC and servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralized lubrication system Jaw's security devise to protect the operator of machine Film end sensor Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products. Technical Specifications Output Quantity: 50 g - 2000 g 20 - 55 Bags/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core Diameter 76 mm & Reel Diameter 300 max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Magazine Shaft Programmer cam switch controller Impulse jaw Platform English Folding System Bucket Elevator Extra Dosing cup Extra Conformer for different sizes Air release system Special Weighing System
Salient Features Advance augur dozing system control with special servo motor Operator friendly PLC controller Independent augur system with adjustable height. Special scoop conveyer for automatic hopper filling Special hopper with agitator control with level sensor Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with servo motor and control cards. Independent drives for sealing, feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC through servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralised lubrication system Jaw's security devise to protect the operator of machine Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Milk Powder, Pesticide Powder, Detergent Powder, Chemical Powder, as well as all kinds of powder products. Technical Specifications Output Quantity: 100 g - 1000 g 1000 g/5000g Outpt: 20 - 75 Bags/min 15 - 30 Packs/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 7.2 KVA Peak Power Rating: 6.48 KW Air Requirement: Air Pressure: 6 bar Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Conveyor Date Coding System Extra Magazine Shaft Optional Film End Sensor UV sterilisation of packaging film Programmer cam switch controller Special thermic sealing jaw Impulse jaw Volumetric dozing system Platform English Folding System Extra Conformer for different sizes Air release system
Salient Features PLC control Special bag push conveyor Dual Feeder for course and fine weight. Special weighing system control with load cell Special variable speed conveyor to synchronies with bag closing machine Electro pneumatic bag spout (Bag Gripper) Electric Control panel with IP-54 protection standard Main Feed controlled by pneumatic system All parts in contact with product are made of Stainless steel. Appropriate feeding system for different products Machine Packaging Capabilities Milk Powder, Pesticide Powder, Detergent Powder, Chemical Powder, Rice, Sugar, Beans, Seeds, Salt, Tea, Dry Fruits, Pulses & any other granule or powder product. Technical Specifications Output Quantity: 5 Kg - 20 Kg: 10-15 Bags/min 10 Kg - 50 Kg: 06-12 Bags/min Filler Accuracy: �± 0.05 to 0.25 % Pack / Quantity Range: Min. Bag size (W x L) approx: 305 mm x 356 mm Max. Bag size (W x L) approx: 533 mm x 890 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil, Polypropylene woven bag, Jute bag, Cotton Bag, Paper Bag, China fusing, etc. Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 2.5 KVA Peak Power Rating: 2.35 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 3550 mm x 1525 mm x 2970 mm (Depends on Customised Requirements.) Weight: 600 kgs (Net) Optional Accessories Customised pack Size Automatic Bag Counting System Long Conveyor Extra mouth collar for different size bags Special pneumatic sealer with adjustable Heavy duty Industrial Sewing machine with adjustable ahead
Salient Features Special volumetric cup dozing system control by special gear motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine. Bag Unwinding by Lanatex belt drive through gear and servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC and servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralized lubrication system Jaw's security devise to protect the operator of machine Film end sensor Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products. Technical Specifications Output Quantity: 1000 g -5000 g Output: 12-40 Packs/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core dia 76 mm & Reel diameter 300 mm max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photo mark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Magazine Shaft Programmer cam switch controller Impulse jaw Platform English Folding System Bucket Elevator Extra Dosing cup Extra Conformer for different sizes Air release system Special Weighing System
Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LxWxH): 1810x1650x3875(including Condenser) Machine weight: 1800
Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
Product Description Mixing opener is suitable for all classes of raw cotton (usually for those with high maturity and higher class). These are placed in the front of the automatic plucker, and transmitted them to a small block brought by the automatic plucker raw cotton into the machine with the aid of Condenser add on (additional item), open and remove some impurities and dusts, then suck the raw cotton into the platform with its condenser. Technical Specifications Production Kg/h: 800 Kg/h Width in mm: 1060 Trash extraction efficiency: Trash extraction 3.5/hour, usually about 30-35% Spiked apron speed: 1, 1.25, 1.5, 1.75 m/min Bales speed: 60x 70x 80 100 m/min Press apron speed: 1x 1.25x 1.5x1.75 m/min Evening roller diameter/rotating speed: 260mm\200r/min Spike beater diameter/rotating speed: 400mm\400r/min Knife beater diameter/rotating speed: 400mm\430r/min Small hedgehog beater (1) diameter/rotating speed: 400mm\700;800;900r/min Small hedgehog beater (2) diameter/rotating speed: 400mm\745;850;960r/min Grid bars type/interval space: Flat steel grid bar spike knife double beater 12-22Small hedgehog beater (1) First group 12-22mm Second group 10-22mm Small hedgehog beater (2) 10-22mm Spike, knife beater and grid bar: Entrance10-15mm Exit12-20mm Hedgehog beater (1) and grid bar interval space: Entrance10-14mm Exit13-17mm Hedgehog beater (2) and grid bar interval space: Entrance10-15mm Exit15-20mm Press apron and spiked apron interval space: 60-80mm Spiked apron and evening roller interval space: 40-80mm Spiked apron and spike beater interval space: 5mm Motor specification: Rotating beater 6-4kw (left) 1430r/min Rotating spiked apron 2-21-6 0.6kw 930r/min Rotating Spiked apron 0-100 0.37kw 14r/min Size (LxWxH) mm: 5358x1430x3696 including Condenser Machine weight: 4200 Kg
Product Description Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process. Technical Specifications Beater Width: 1720 mm (Special) & 2300 mm (Normal) Production Kg/h: 1000 Kg/h & 1500 Kg/h Basic Pile Weight: 6000 Kg & 7500 kg Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time Calender Roller Dia.130 mm Both Sides; Middle 116 mm Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min Installed Power: 8.6 Kw & 10.6 Kw Overall size: 22030*5212*3082 & 22030*6648*3082 Net weight: 6000 Kg & 6500 Kg
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to /
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to
Product Description Cotton is carried out by conveyor bands from the carding machines to this machine. During the exit of the machine is the requested basis weight and dimensions. The operator places the packaging at the good exit and packages the product himself. Technical Specifications Way of Production: Zig Zag Cotton Packaging Machine Type of Production: Zig zag cotton between 50 grams and 250 grams Production Capacity: 50 grams 10 Piece/ minute 100 grams 10 Piece/ minute 250 grams 4 Piece/ minute Machine Dimensions: Length 1500 mm, Width 1000 mm, Height 1200 mm Weight of Machine: 750 Kg
Product Description Waste Recycling Machine adopts a leading technology. It superfine new tearing machine for textile waste which are with porcupine roller with diameter 600 -1000 mm each cylinder with difference angle and specifications taper-pins. The feeding rail adopts elastic rubberised roller with diameter 150 - 250 mm. The working width from 1000-2000 mm and the maximum capacity up to 2500kg per hour. Technical Specifications Machine TMI 60.17.1.2000416a Processing Capacity (kg/h): 160~180 Drum Diameter (mm): 250 Drum Weight (Kg/Drum): 420 Working Width (mm): 1000 Installed Power (Kg/h): 5.5*N Outside Dimension (LxWxH) (mm): 10200x1800x1400 Machine TMI 60.17.1.2000416b Processing Capacity (kg/h): 220 ~ 280 Drum Diameter (mm): 400 Drum Weight (Kg/Drum): 640 Working Width (mm): 1000 Installed Power (Kg/h): 7.5*N Outside Dimension (LxWxH) (mm): 11600x1800x1400 Machine TMI 60.17.1.2000416c Processing Capacity (kg/h): 300 - 350 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1000 Installed Power (Kg/h): 22+15*(N-1) Outside Dimension (LxWxH) (mm): 14400x1800x1450 Machine TMI 60.17.1.2000416d Processing Capacity (kg/h): 450 - 550 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1500 Installed Power (Kg/h): 30+18.5*(N-1) Outside Dimension (LxWxH) (mm): 14400x2300x1450
New Full Automatic Press Machine Rubber Cots Usage in a Textile Spinning Mill Product Description The Full automatic textile rubber cots press machine is newly developed for pressing the rubber cots on to the roller bearing. It is a new generation of cots press machine. The Full automatic textile rubber cots press machine is mainly used in spinning mill for carry out press the rubber cots on to the roller bearing. This machine is a fully automatic machine, which greatly saves labor. It's excellent pressing quality helps to improve manufacturing efficiency, save time and cost of operation. The Full automatic textile rubber cots press machine has an automatic feeding. The processing of automatic press of the rubber cots on to the roller bearing, results in products of high precision pressing. Technical Specifications Feeder power: 0.3 Kw Ã?? 3 Units, 220 V Production: 300-400 Sets / hour Air pressure: 5 Kg or more Function: fully automatic pressing aluminum bushing rubber cots, double layer rubber cots onto the roller bearings.
Product Description Automatic Cone winder inherits the advantages of a series winder, adopts brand-new profile design & is featured by beautiful and dignified features. It adopts the brand-new smart anti-pattering device, new type of tension control system and new type of balloon central mechanism to ensure perfect package building, more even winding tension, high machine operation stability and reliability to meet customer requirement. Technical Specifications Machine Type: Single Spindle, Single Sided, LH Machine or RH Machine Application: Single of Cotton, Wool, Man-made staple fiber or their blends, yarn counts from Nm 3.5 to the highest Winding Speed: 400 - 2200 m/min, Step less adjustable No. of Spindles: 12 - 54 Spindles, every 4 spindles one extension Spindle Pitch: 320 mm Package Taper: 3'30", 4'20", 5'57", 9'15" Feeding Packages:
TMI 135.1.1.200501 - Single Needle Flat Bed Garment Industrial Sewing Lockstitch Machine TMI 1.1.200501 Product Details Needle No: 1 Stitch Length: 0-5mm Presser Foot Lift Height: 5.5-13mm Spm: 4500 Cbm: 650*250*470 Weight: 32/35 Power: 250W Features: 1) High speed and light weight 2) Automatic lubricating system 3) Can sew light to medium heavy material, such as knits and chemical fiber
TMI 135.2.2.200502 - Single Needle Flat Bed Industrial Lockstitch Sewing Machine TMI 2.2.200502 Product Details Needle No: 1 Stitch Length: 0-5mm Presser Foot Lift Height: 5.5-13mm Spm: 5000 Cbm: 600*230*550 Weight: 30/34 Power: 250W
TMI 135.3.3.200502 - Double Twin Needle With Split Needle Bar Lockstitch Sewing Machine TMI 3.3.200502 Product Details Needle Gauge: 3/8", 1/4" Needle No: 2 Needle Thread: 2 Presser Foot Lift Height: 7-13mm Spm: 5000 Cbm: 675*310*660 Weight: 43/48 Power: 400W
TMI 135.4.4.200502 - Direct Drive Computerized Double Synchronous Heavy Duty Lockstitch Sewing Machine TMI 4.4.200502 Product Details Heighten design in rear cover and cover axis design to avoid oil leakage and operating more safely. Adopt the Innovative direct drive, energy-saving servo motor directly connect to the main shaft, start fast and stop accurately, reducing the responsive time. 750W energy-saving servo motor, more powerful trimmer. Round knives, high-performance trimmer structural to ensure accurate trimming effect, the cut is flat. Have the functions of automatic trimmer, automatic needle positioning, automatic counting and automatic reverse sewing. Max Sewing Speed: 6500rpm Stitch Length: 8MM CBM: 470x330x480mm Power: 550W