Coconut Fiber, Silicon Rubber, Tea, Spices .
Product Description Chute feeder has a good effect on open & low fiber damages. Two feed rollers feed materials to prevent from warping. The feed rollers controlled by inverter. It is mounted with protection unit. The space between feed rollers and feed rollers/open roller is adjustable. The vibrant favourable for forming even and uniformity fiber batt. The output roller draft for improving sliver evenness. The sliver evenness is improved. Technical Specifications Suitable fiber: All synthetic and mixed fibers which are less than 76mm Working width (mm): 950 Production (kg/h): 100 Diameter of feed roller (mm): 120 Diameter of opening roller (mm): 266 Blower speed (rpm): 2840 Air displacement: 600m3/h -500pa Installed power (Kw): 2.85 Overall dimension (Wx Lx H) (mm): 1614 x 600 x 2800 Net weight (kg): 1400â??
Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
TMI 60.4.2.200410 - MULTI MIXER Spinning Machine Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to /
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to
TMI 135.1.1.200501 - Single Needle Flat Bed Garment Industrial Sewing Lockstitch Machine TMI 1.1.200501 Product Details Needle No: 1 Stitch Length: 0-5mm Presser Foot Lift Height: 5.5-13mm Spm: 4500 Cbm: 650*250*470 Weight: 32/35 Power: 250W Features: 1) High speed and light weight 2) Automatic lubricating system 3) Can sew light to medium heavy material, such as knits and chemical fiber
TMI 45.15.6.200421 - Single Stack Coin Drying Machine Product Description Computer control easily. Cool down the drying material automatically for safe use. It is available to run in one-way direction and two-way direction. The machine is with wool fiber clean system, with cool and hot air choice programs, This can ensure the ideal drying effect, special for high grade clothes. Four heating models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
TMI 45.16.7.200421 - Single Stack Coin Drying Machine Product Description Computer control easily. Cool down the drying material automatically for safe use. It is available to run in one-way direction and two-way direction. The machine is with wool fiber clean system, with cool and hot air choice programs, This can ensure the ideal drying effect, special for high grade clothes. Four heating models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
Product Description The separator is used for cotton cleaning process and is directly installed in a conveying duct, which can detect and remove effectively the metal impurities and spark in textile fiber. It is an importance equipment for ensuring safety in production. Technical Specifications Power Source: AC220V 50HZ,60HZ Sensitivity: Spark-1mm,visual angle no less than 90 metal-no less than 2mm steel ball Response time: Millisecond level Cotton speed range in conveying duct: 5-18m/sec Dia. Of conveying duct: 300 mm
Fiber optic cable, patch cords, patch panels. racks and cabinets and industrial ups,.
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery Product Description Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring. Technical Specifications Production Output (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Speed in r/min: 740 r/min Blade extension from grid in mm: 2.5 - 7.5 mm Rail Diameter in mm: 5132 mm Total Height in mm: 3864 mm Power in Kw: 4.1 Kw Weight in Kg: Around 1600 Kg
TMI 12.4.200413 Product Description Rotor spinning machine is a kind of new-type open end spinning machine with some features such as high speed, high efficiency, automatic exhausting impurities. It can spin directly various short fibers, 40mm cut fibers or 60mm cut viscose into single fine yarn from combed sliver. This is a double-side-type spinning machine based on modularised design. It applies many new technologies such as air suction spin box, semi-automatic piecing-in, closed loop control etc. Max. rotor speed can reach 110000 rpm. Thanks to application of numerous new technologies, it holds spinning and winding quality close to full automatic rotor spinning machine, and then shows better price-performance ratio. Technical Specifications The minimum and max. tex: 120-150 (5s-36s) Suitable tex: 83.2-28 (7s-21s) Cotton to be fed: 2500-5000 Rotor speed (r/min): 100000 Yarn guiding speed m/min: 40-160 Splitting roll seppd: 5500-9000 Twisting degree: 220-2250 Pneumatic moto purging volume (m3/h): 5500 Suitable fiber length (mm): less than 40 Operating height (mm): 1560 Yarn feeding bobbin: outer dia: 400x914 Head space (mm): 230 Rotor diameter (mm): 400 or 40 Head number: 192 or 240 Bobbin specs (outer diameter*height)(mm): 54x170 Take-up specs (diameter*height): 300*150 Loaded weight (kg): 3 Crossing angle: 300,330,390,420 Yarn breaking (Filament per 1000 filament per hour): less than =50 Purification efficiency: 60-80 Pressure in rotor intra cavity: greater than = 5 Mechanical stretching times: 32-220 Tension stretching times: 0.93-1.06 Total power: 64kw
TMI 45.31.2.200425 - Automatic PCE Dry Cleaning Machine Product Description: The machine applies to hotels, restaurants, and shops, guest houses and other service industries of cotton, wool, chemical fiber and other washing clothes. After washing the clothes thoroughly clean greasy dirt, do not fade, no fold, does not shrink, not susceptible to damage, and can keep the original soft, crisp, bright luster. The dry cleaning machine to international current four vinyl chloride (C2CL4) as the washing liquid, decontamination capability, the electrical part of the selection of computer control panel, main components made of stainless steel or non-ferrous metal die stamping is refined, in the home - used hot galvanising technology, so that the machine's corrosion resistance greatly enhanced. The dry cleaning machine and absorption of foreign advanced technology, safe and reliable use, convenient operation and maintenance, is the ideal washing equipment.
TMI 45.35.2.200426 - Mushroom Shape Laundry Press Product Description This mushroom shape Laundry Press is ideal for finishing tapered areas,yokes,small areas of dresses,short sleeves,and other hard-to-reach parts. Two separate cylinders:one is to close the top portion,and another is to apply pressure.This keeps the efficiency of each cylinder at maximum for the longest possible time.Adopting the hydraulic buffer makes to close or open the die head smooth and reduce noise and vibration.The integral design of the gas circuit is very simple and easy. Pressing part is especially big and made of iron fiber and durable cotton cover as well as with colour coded push-button switch.Its features are beautifully designed, strong, high stability and providing ease of operation and maximum operator convenience.
Product Description Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage. Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path. Technical Specifications Production kg/h: 800 Dust cage diameter mm: 500 Beater type: 6-Wing Blower diameter mm: 500 Blowing rate: Around 4500 General Power Kw: 4 Size (LxWxH) mm: 1721x800x1000 Machine weight kg: 600
Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LxWxH): 1810x1650x3875(including Condenser) Machine weight: 1800
TMI 60.5.1.200412 - FINE OPENER Spinning Machinery Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(L WH): 1810 X 1650 X 3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(L X W X H): 1810 X 1650 X 3875(including Condenser) Machine weight: 1800