Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
TMI 60.4.2.200410 - MULTI MIXER Spinning Machine Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
Tmi 45.3.3.200418 - Washing & Dewatering Machine 100 Kg Product Description Eco-friendly, energy-saving, low noise, micro-vibration Washing & Dewatering Machine 100 kg Capacity: 100 kg (220lb) Tumble volume: 965 L Washing rotation: 50 r/min Spinning speed: 620 r/min G factor: 246 Motor: 5 HP 7.5 Kw Height mm 1970 Width mm 1650 Depth mm 1875 Door dimension mm 620 Tumble diameter mm1224 Tumble depth mm 820 Net weight kg 2850 Gross weight kg 3000 Water inlet: DN50/DN32 Steam: DN50 Drain diameter mm 125 Motor: 380 / 50 /3 / 4+ground 380V / 10.5A Installation Clearance between machines mm 500 Clearance behind machines mm 800
Product Description Chute feeder has a good effect on open & low fiber damages. Two feed rollers feed materials to prevent from warping. The feed rollers controlled by inverter. It is mounted with protection unit. The space between feed rollers and feed rollers/open roller is adjustable. The vibrant favourable for forming even and uniformity fiber batt. The output roller draft for improving sliver evenness. The sliver evenness is improved. Technical Specifications Suitable fiber: All synthetic and mixed fibers which are less than 76mm Working width (mm): 950 Production (kg/h): 100 Diameter of feed roller (mm): 120 Diameter of opening roller (mm): 266 Blower speed (rpm): 2840 Air displacement: 600m3/h -500pa Installed power (Kw): 2.85 Overall dimension (Wx Lx H) (mm): 1614 x 600 x 2800 Net weight (kg): 1400â??
ADDITIVES Antioxidant in hydro processed fuel Mg/I Min 17 Antioxidant non hydro processed fuel Mg/I Max 24 Static dissipater first doping ASA-3 Mg/I Min 24 Stadis 450 Mg/I Min 1 COMBUSTION PROPERTIES Smoke point mj/lkg Min 18.4 D4808 Specific energy, net Mm Min 19 D1322 Luminomitter number Min 45 D1740 Naphthalenes % volume Max 3 D1840 COMPOSITION Total Acidity mg KOH/g Max 0.01 354 D3242 Aromatics % vol Max 22 158 D1318 Sulphur, Total % mass Max 0.30 107 D1266/2622 Sulphur, Mercaptan % mass Max 0.003 342 D3227 Doctor, test 30 D4952
Salient Features PLC control Special bag push conveyor Dual Feeder for course and fine weight. Special weighing system control with load cell Special variable speed conveyor to synchronies with bag closing machine Electro pneumatic bag spout (Bag Gripper) Electric Control panel with IP-54 protection standard Main Feed controlled by pneumatic system All parts in contact with product are made of Stainless steel. Appropriate feeding system for different products Machine Packaging Capabilities Milk Powder, Pesticide Powder, Detergent Powder, Chemical Powder, Rice, Sugar, Beans, Seeds, Salt, Tea, Dry Fruits, Pulses & any other granule or powder product. Technical Specifications Output Quantity: 5 Kg - 20 Kg: 10-15 Bags/min 10 Kg - 50 Kg: 06-12 Bags/min Filler Accuracy: �± 0.05 to 0.25 % Pack / Quantity Range: Min. Bag size (W x L) approx: 305 mm x 356 mm Max. Bag size (W x L) approx: 533 mm x 890 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil, Polypropylene woven bag, Jute bag, Cotton Bag, Paper Bag, China fusing, etc. Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 2.5 KVA Peak Power Rating: 2.35 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 3550 mm x 1525 mm x 2970 mm (Depends on Customised Requirements.) Weight: 600 kgs (Net) Optional Accessories Customised pack Size Automatic Bag Counting System Long Conveyor Extra mouth collar for different size bags Special pneumatic sealer with adjustable Heavy duty Industrial Sewing machine with adjustable ahead
Product Description Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process. Technical Specifications Beater Width: 1720 mm (Special) & 2300 mm (Normal) Production Kg/h: 1000 Kg/h & 1500 Kg/h Basic Pile Weight: 6000 Kg & 7500 kg Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time Calender Roller Dia.130 mm Both Sides; Middle 116 mm Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min Installed Power: 8.6 Kw & 10.6 Kw Overall size: 22030*5212*3082 & 22030*6648*3082 Net weight: 6000 Kg & 6500 Kg
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg
TMI 60.2.1.200404 - RECIPROCATING BALE PLUCKER Spinning Machinery Product Description Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process. Technical Specifications Beater Width: 1720 mm (Special) & 2300 mm (Normal) Production Kg/h: 1000 Kg/h & 1500 Kg/h Basic Pile Weight: 6000 Kg & 7500 kg Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n â??Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time Calender Roller Dia.�¦130 mm Both Sides; Middle �¦116 mm Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min Installed Power: 8.6 Kw & 10.6 Kw Overall size: 22030*5212*3082 & 22030*6648*3082 Net weight: 6000 Kg & 6500 Kg
Salient Features Special linear weigher control with load cell & stepper motors Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through servo motors and control cards Flexible vertical seal jaw positioning to offer range of variable pack with offering Quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC controlled via servo motors and control cards Linear weighing system for accurate dosing Independent temperature controller for both seal Jaw's security devise to protect the operator of the machine Electric Panel IP-54 Protection Standard Machine Packaging Capabilities Potato Chips, Snacks, Rice, Macaroni, Beans, Pasta, Dry Fruits, Pasta, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight products. Technical Specifications Output Quantity: 50 g 2000 g Output: 20-55 bags/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core dia 76 mm & Reel diameter 300 mm max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photo mark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Pneumatic Magazine Shaft Optional Film End Sensor UV Sterilisation of packaging film Special impulse sealing jaw Bucket elevator â?¢ Platform English Folding System Extra Conformer for different sizes Air release system Linear weigher
Salient Features Special multi head weigher control with load cell & stepper motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive-through servo motors and control cards Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC controlled via servo motors and control cards Multi head weighing system for accurate dosing. Independent temperature controller for both seal Jaw's security devise to protect the operator of a machine Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Potato Chips, Rice, Macaroni, Beans, Snacks Pasta, Dry Fruits, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight of products. Technical Specifications Output Quantity: 15 g - 1000 g 30 - 85 Packs/min Filler Accuracy: ± 5 gm to 5 g Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 225 mm x 350 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 40 to 120 microns Film Reel: Core Diameter 76 mm & Reel Diameter 300 mm max Electrical Requirement: Input Supply: 220 or 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 3.5 KVA Peak Power Rating: 3 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2438 mm Weight: 700 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Pneumatic Magazine Shaft Optional Film End Sensor UV sterilisation of packaging film Special impulse sealing jaw Bucket elevator Platform English Folding System Extra Conformer for different sizes Air release system Linear weigher
Salient Features Special volumetric cup dozing system control by special gear motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing, Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through gear and servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC and servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralized lubrication system Jaw's security devise to protect the operator of machine Film end sensor Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products. Technical Specifications Output Quantity: 50 g - 2000 g 20 - 55 Bags/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core Diameter 76 mm & Reel Diameter 300 max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Magazine Shaft Programmer cam switch controller Impulse jaw Platform English Folding System Bucket Elevator Extra Dosing cup Extra Conformer for different sizes Air release system Special Weighing System
Salient Features Advance augur dozing system control with special servo motor Operator friendly PLC controller Independent augur system with adjustable height. Special scoop conveyer for automatic hopper filling Special hopper with agitator control with level sensor Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with servo motor and control cards. Independent drives for sealing, feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC through servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralised lubrication system Jaw's security devise to protect the operator of machine Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Milk Powder, Pesticide Powder, Detergent Powder, Chemical Powder, as well as all kinds of powder products. Technical Specifications Output Quantity: 100 g - 1000 g 1000 g/5000g Outpt: 20 - 75 Bags/min 15 - 30 Packs/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 7.2 KVA Peak Power Rating: 6.48 KW Air Requirement: Air Pressure: 6 bar Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Conveyor Date Coding System Extra Magazine Shaft Optional Film End Sensor UV sterilisation of packaging film Programmer cam switch controller Special thermic sealing jaw Impulse jaw Volumetric dozing system Platform English Folding System Extra Conformer for different sizes Air release system
Salient Features Special volumetric cup dozing system control by special gear motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine. Bag Unwinding by Lanatex belt drive through gear and servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC and servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralized lubrication system Jaw's security devise to protect the operator of machine Film end sensor Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products. Technical Specifications Output Quantity: 1000 g -5000 g Output: 12-40 Packs/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core dia 76 mm & Reel diameter 300 mm max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photo mark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Magazine Shaft Programmer cam switch controller Impulse jaw Platform English Folding System Bucket Elevator Extra Dosing cup Extra Conformer for different sizes Air release system Special Weighing System
We are a team of exceptionally prepared experts, with tremendous experience for giving the altered answers for the clients dependent on their necessities at a moderate expense. We have a different group forget to answers to guarantee extreme security for your premises. Come and join your hands with us to enter the verified world with Time Attendance System | Access Control System |Biometric System | Door Access Control System, Dubai, UAE.Our emphasis on building lifetime esteem associations with our Customers by improving their business proficiency and productivity.
We Easy First Management Consultancies, mandated by our seller Refinery in Kazakhstan with full corporate and legal responsibilities, under penalty of perjury, hereby, issue this confirmation letter that our seller is ready, willing, and able to supply the following products according to the terms and conditions and specifications with approval by the refinery. Note: Mandates Fees will be applicable on this SCO of an amount fixed price of 20$ per metric tons and for jet fuel will be 1$ per barrel will be direct from the buyer to Easy first consulting management brokerage by NCNDA sign from both side before the ICPO PRODUCT NAME: EN590 10PPM Transaction: Fob Rotterdam, Houston, Singapore And Fujairah Monthly Quantity: 50,000 To 200,000 Metric Tons Spot And 200.000to 400,000 Metric Tons Monthly Contracts. Price: Gross Us$ 410 / Net Us$ 400 Per Mt 1.buyer Issues Icpo With Tank Storage Agreement (tsa) Buyer Signs And Returns The Commercial Invoice With Ncnda/imfpa Signed By All Buyer Groups With Commission Structures. 4. Buyer Provides Authorization To Verify (atv) From Buyer Storage Tank Farm On Tank Farm Company Letter Head With Gps Coordinates And Terminal Access Code To Enable Seller Logistic Teams Verify Buyer Tank Farm, After The Verification Is Completed, Seller Proceed To Issuing The Following Documents:- A) Standard Fresh Sgs Report. B) Injection Report Shore Tank C) Tank Storage Receipt (tsr) D) Product Quality Passport E) (atv) Authorization To Verify. F) Authorization To Sell And Collect (atsc) G) Statement Of Product Availability H) Certificate Of Origin Of The Product I) Commitment And Assurance Letter To Supply J) Nor (notification Of Readiness) K) Unconditional Dip Test Authorization 5. Buyer Upon Verification Of The Product And Pop Confirmation, Order Sgs To Conduct The Dip Test On Buyer Expense And Physical Verification Of The Product 6. Seller Commences Injection Immediately Into Buyer Tank And "issues Buyer Title Of Ownership Certificate To Be Followed By All Export Documentations. 7. Buyer Makes Payment By Mt103 Or Tt Wire Transfer For The Total Product And Lifts The Product And Seller Pays All Intermediary Involve In The Transaction
Time attendance system, access control system, biometric system, door access control systems.
Crude oil.
.Air & sea service for all over the world, our net work is increesed all over the world
