That is very special material for your projects. Cut to size also available. Please contact to us any further information. 2 cm polished slab 19,50 Usd/m2 Fob Gemlik port Turkey
Production capacity is between 1200 and 1400 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 600-750 units. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 1500-1900 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 800-1000 pieces. manual, semi-automatic and fully automatic preferred fixed machines.
Production capacity is between 2000 and 2300 units per hour and it is able to produce paving stone and briquettes in capacities ranging from 1200-1500. manual, semi-automatic and fully automatic preferred fixed machines.
The production capacity is 2600-3000 pieces per hour and it is able to produce paving stone and briquettes in capacities ranging from 1500-2000 units. manual, semi-automatic and full automatic preferred fixed machines
Hourly production capacities ranging amount capable of producing briquettes 5500-6300 ratchet paving stone production capacities and can vary from 4000-4500 units, are semi-automatic and fully automatic machine preferably constant.
Our mobile designed walking briquette machines are designed in two different types, which press on the concrete or put pressure on a table and leave it on the concrete. NOVAL INC. It produces semi-automatic and fully automatic walking briquette machines capable of producing briquettes with capacities ranging from 1200 to 1400 units per hour. They are able to manufacture briquettes without the need for printing pallets. They only use concrete surfaces with a smooth surface
Our brand is safe and food contact approved cupstocks coated with LDPE. The baseboard has the grammage range from 177 to 240 gsm and coated with 18 gsm LDPE having a high hot seal efficiency. They are available in one or two sides coatings to be used in hot and cold beverages ensuring a reliable liquid barrier which are produced from %100 virgin wood fiber and %100 domestic production that is OBA free.
Sun control security film comercýal film Width 1, 52 m Heýgh 30 m
Pathfinder10 is drill rig for coring and drilling, . It can be built on different frames such as regular skid frame, wheel, truck and hydraulic crawler. It has hydraulic regulated spindle to control speed of rotation between 53 rpm to 897 rpm step less. The rotation head can be swung aside for hole cleaning or grouting equipment. Pathfinder10 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. It has hydraulic jacks at the top of the feeding frame for stabilization. Pathfinder10 has also optional accessories such as hydraulic mud mixer, water flow meter, hydraulic mud pump (140 lt/min), high torque, shock absorbent and second rod holder. 72 rpm181 rpm
Explorer60 is full hydraulic drill rig for coring and drilling for underground galleries and surface. It can be built in different frames such as regular skid frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer60 also can be built in different feed lengths for different purposes. It has hydraulic regulated spindle to control speed of rotation between 166 rpm to 1000 rpm step less. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer60 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. For stabilization it has hydraulic jacks at the top of the feeding frame. Explorer60 has also optional accessories such as larger wire line hoist, cathead or two step hydraulic water pump.
Explorer30 is the small hydraulic drill rig for coring and drilling for narrow tunnels, underground galleries and surface. It has small built so that easy to install and carry. It has hydraulic regulated spindle to control speed of rotation between 350 rpm to 2200 rpm step less. It can be operated with one person. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer30 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods.
Rocker34 wagon drill rig Rocker34 is designed for drilling blast holes with dth hammer. Rocker34 has crawler for the difficult ground conditions, strong construction, easy maneuver capability. MAST AND FEED SYSTEMFeed Length4,1 m13 ft Feeding Force0 - 27 kN Pulling Force47,5 kN Drilling Angle22° - 90° POWER UNITBrandDEUTZ TypeF4L912 Number of Cylinder4 cylinders Cylinder Volume3,7 lt Power51 kW - 70 Hp Rev.2300 rpm Engine TypeDiesel CoolerAir HYDRAULIC SYSTEMFirst Pump160 bar27 cc /rev. Second Pump130 bar19 cc / rev. Auxiliary Pump180 bar19 cc / rev. Hydraulic Oil CoolerAir2024 K - 0,110 kW - 12 V ROTARY UNITSpeed133 rpm Toruque1185 Nm SUPPORT JACKSMovement UnitTrack / max speed 2,9 km/h Leverages of Jacks2 units of Hydraulic Leverages Cylinder Stroke150 mm m Weight2.830 kg ADVANTAGES
STANDARDS : EN 196-3,ASTM C187-C191,AASHTO T129-T131,BS 4550 Movements along X Y Z axes Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port Initial and fi nal setting time (in 0.1 mm) Automatic cleaning of the needle Automatic stop and storage of measurements for up to 50 tests Plunger for initial consistency Thermostatic baths (optional) Display for data input and diagram/test report Printer for final test report and diagram RS 232 serial port for PC connection Moulds and further needles have to be ordered separately, according to the various standards Power supply: 220 V, 50 Hz, single phase Dimensions: 355 x 620 x 580 mm Weight: 40 kg. Dimensions: 355 x 620 x 580 mm Weight: 40 kg
Composite wood Water, uv and fire resistant According to dimensions
- 70mm & 58mm Systems, - Sliding Systems & Flyscreens, - Supplementary Profiles. Profiles come in 6m. lengths. Packing amounts differ according to the profile type.
PVC House Entrance Doors are available both in 70mm and 58mm systems. - 3D Hinges - Hook Lock or 5-Point Lock - Edge Reinforcing - Thermal isolated Thresholds - Tube Steel - incl. door Panel. Special sizes are also available. Comes in pieces. 1 Pallet=10 doors.
PVC Door Panels to be installed in PVC doors. -Thermoformed or Flat Panels with stainless steel application - 24mm or 32mm thickness - PVC Sheets of Kömmerling and Veka - over 100 different models with special designed glasses. comes in pieces. 1 Pallet = 15 pieces.
Vdd5 wagon drill rig (rubber whell driller) Technical characteristics General information Engine38 kw Weight2180 kg Feed frame Length5, 00 m Stroke4, 10 m Push force0 - 25 kn Pull force50 kn Drilling Drill speed0 - 120 cm/min (it may change due to ground.) Drilling diameter2, 5'' - 4'' / 63 mm - 102 mm Drilling depth50 m Rotation unit Drive engine75 rpm Torque1000 nm Oil cooler2024k – 0, 110kw – 12v Fuel tank capacity70 liters Oil tank capacity250 liters Advantages Vdd5 has hydraulic pull and push force. Vdd5 works with dth hammer. Vdd5 is moving with 3 wheel hydraulic traction. Vdd5 can be controlled with electrical joystick. Three wheel traction system of vdd 5 can be chosen as demanded. (only front, only back or free) Vdd5 is manufactured with high quality materials to maintain power and lifetime. Vdd5 provides easier and faster drilling with enhanced pull and push force and rotation. Vdd5 has a large volume of oil tank and oil cooler; therefore, the oil is used more efficient and long time. Vdd5 can drill 76, 89, and 100 mm of hole sizes. Vdd5 can drill with giving from 22 degrees to 90 degrees of drilling position. Vdd5's drilling vibration is minimized with the help of balancing pistons. Özanadolu sitesi 682. Sokak no: 25-27 Ývogsan-ankara-turkey tel: +90 312 394 47 24 faks: +90 312 395 62 07
Technical data of the machine Working area dimension 2350 x 1250 x 60 mm. Maximum pressure 210 ton – 6 kg / cm¦ Surface pressure 160 ton – 5 kg / cm¦ Gradual pressure characteristics Electronic Vacuum pressure 28 ton – 750 milibar Vacuum capacity 100 m¦/h Vacuum motor power 3 kw – 1400 rpm (2 motors) Pressing motor characteristics 1.1 kw – 2800 rpm Resistance heating power 18 x 1000 w Air resistance 4 x 1000 w Air pressure 6 bar Total power 30 kw, 380v , 50hz Machine body dimensions 2000 (w) x 2020 (h) x 2900(l) Pressing plate dimensions 1700 (w) x 1090 (h) x 3350(l) Machine’s total weight 5 ton
