The resin method has certain advantages in removing low-concentration zinc-containing wastewater from solution. When zinc-containing wastewater passes through the ion exchange resin, the ions on the exchanger are exchanged with the zinc ions in the water to achieve the purpose of removing the zinc ions in the water. This process is reversible and the ion exchange resin can be regenerated. The chelating resin provided by Jiangsu Kingshan New Material Co., Ltd. can provide suitable ion exchange resin for zinc removal according to different water quality conditions. It has high exchange capacity, convenient regeneration and long service life, and has been widely used at home and abroad.
The resin method has certain advantages in removing low-concentration zinc-containing wastewater from solution. When zinc-containing wastewater passes through the ion exchange resin, the ions on the exchanger are exchanged with the zinc ions in the water to achieve the purpose of removing the zinc ions in the water. This process is reversible and the ion exchange resin can be regenerated. The chelating resin provided by Jiangsu Kingshan New Material Co., Ltd. can provide suitable ion exchange resin for zinc removal according to different water quality conditions. It has high exchange capacity, convenient regeneration and long service life, and has been widely used at home and abroad.
"Zinc removal resin The resin method has certain advantages in removing low-concentration zinc-containing wastewater from solution. When zinc-containing wastewater passes through the ion exchange resin, the ions on the exchanger are exchanged with the zinc ions in the water to achieve the purpose of removing the zinc ions in the water. This process is reversible and the ion exchange resin can be regenerated. The chelating resin provided by Jiangsu Kingshan New Material Co., Ltd. can provide suitable ion exchange resin for zinc removal according to different water quality conditions. It has high exchange capacity, convenient regeneration and long service life, and has been widely used at home and abroad."
The resin method has certain advantages in removing low-concentration zinc-containing wastewater from solution. When zinc-containing wastewater passes through the ion exchange resin, the ions on the exchanger are exchanged with the zinc ions in the water to achieve the purpose of removing the zinc ions in the water. This process is reversible and the ion exchange resin can be regenerated. The chelating resin provided by Jiangsu Kingshan New Material Co., Ltd. can provide suitable ion exchange resin for zinc removal according to different water quality conditions. It has high exchange capacity, convenient regeneration and long service life, and has been widely used at home and abroad.
We deals in the following products :- 1) PVC Resin 2) Caustic Soda Flakes
Zinc Dust
Zinc Dross
Zinc Ash
Nitrogen - 46% min Moisture - 1% max Biuret - 1% max Prilled - 0.85-2mm Granular - 2-4mm 90-94%min color - Pure White Radiation - Non-Radiactive Free Ammonia - 160pxt ppm max
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Available Zinc bottom dross in small pieces from pipe fitting galvanizing company. Quantity available : 100-120mts
We can supply/export large amount of Zinc ore oxide of 40-45%Zn on regular basis.
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�?�°C to 1250�?�°C with a boiling point of 2355�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We deals in the following products of Europe Origin :- Zinc Ingots Aluminium Ingots
Zinc Sulphate Mono/Hepta(IP/USP) high quality and High Standard Zinc Sulphate Supplier of Zinc Sulphate Heptahydrate-21% , Zinc Sulphate Monohydrate -33% , Zinc Sulphate Monohydrate -35% Zinc Sulphate Monohydrate 26% 33% Zinc Sulphate Powder, the rich source of zinc is essential for healthy growth and reproduction in plants.
Crystals Benzoin Siam Crystals
Nail Gel Remover It is a revolutionary nail polish remover that makes it easy to remove in the nail removal process without worried about how to remove nail polish any more. Quickly and safely! This product made from natural ingredients, very light smell, can remove the nail polish easily and don't need to worry about removing nail gel Polish will damage your nail.
Damar products is still needed throughout the world, it can have significant impact on price increases. We provide this Damar on an ongoing basis and can serve exports to your country
Damar products is still needed throughout the world, it can have significant impact on price increases. We provide this Damar on an ongoing basis and can serve exports to your country. With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe. With our full support we help you become an importer of the products we sell.
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
