Find Verified Xl 65Hp Taylor Wharton Liquid Gas Cylinder Suppliers, Manufacturers and Wholesalers

Pressure Hazard â?? The containers covered by this literature may contain pressures up to 24 BAR(2412kPA)



This prices are excluding GST , can vary dependent on market situations.

The Above prices re excluding GST can varry as per the market situations

Taylor Wharton XL Cylinders Storage and transport cylinders for liquefied gases.
Inner and outervessels made of stainless steel
All vessels comply with EU Directive 1999/36/EC for Transportable Pressure Equipment (TPED)
Available with and without Pressure Building
Full circle shock-mount ring

The Cylinders cost are excluding GST.

Gas Withdrawal Rate - 9.2 N/m/hr
Empty Weight - 164 Kg
Full Weight - 324 Kg
Dimension - 1764 x 508 mm

Guar Gum Types

Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.

Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).

Commodity: Caustic Soda Flakes
Caustic Soda Pearls / Bead / Prill / Granule
Caustic Soda solid
Molecular formula: NaOH
Molecule Weight: 40
H.S code: 28151100
CAS: 1310-73-2
UN number 1823
Dangerous Class 8

We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base and external processing of flake caustic, solid caustic soda, granular caustic soda, which provide ideal condition and environment for domestic and foreign trade.

Typical Specifications:

Indexes Purity NaCl Na2CO3 Fe2O3
99 99 0.15 0.9 0.003
98 98 0.15 0.5 0.002
96 96 2.8 0.85 0.005

Used as a raw material in the manufacture of soaps ,detergent, textiles and paper ,and likewise ,in water softening and treatment, drilling mud in oil field, refining petroleum products, and washing beer and soft drink bottles, in food and drug industry ,it is used as acidity regulator, alkali, and so on.

Packing :Flake/pearl:25kg/plastic woven bag with PE inner
Solid :200kg/ iron drum

Loading weight in 1 x 20fcl: 27mt

Chemical name:Magnesium nitrate
Molecular formula:Mg(NO3)2.6H2O
Molecular weight:256.40

Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas.

Quality standard:
Item Indicator
Industrial grade Agriculture grade
Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0%
PH value â?¥4 ---
Heavy metal â?¤0.002 ---
Water insoluble â?¤0.05% â?¤0.1%
Iron â?¤0.001% ---
Magnesium oxide content(CaO) --- â?¥15%
Nitrogen content(N) --- â?¥10.7%

Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture.
Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements.


1.Purity 98% white granule
2.Used for fertilizer or industrial material
3.Export Asia/Europe
4.ISO9001

Cmmdity: Aluminum Fluride (Aluminium fluride)
ther name: Aluminum trifluride
Frmula:AlF3
M.W.:83.98

Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.

Specificatin:

grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3

AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.

Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.

Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.

Innovative technology of pre-materials suitable for gas springs
welded and drawn according to ASTM A213
various ID tolerance requirement of H8, H9, H10 and H11
surface roughness below 15RA (0.40 �¼m)
mechanical properties are controlled to endure excessive stress
hardness, tensile strength, yield strength and elongation
servicing high precision pneumatic cylinder applications

ODï¼?mm) ID(mm) WT(mm) ID Tolerances,+0/-0.05) Specifications Materials Surface Finish(max)
15.0 13.0 1.0 CGS-031,H9 A213
SAE1010/#10;

SEA1020/#20

;Q235;

304L;316L

ID < 20 RA <0.4um
18.0 16.0 1.0 A269 OD < 32 RA <0.8um
19.0 17.0 1.0
19.0 16.0 1.5 CGS-021,H10 A213 ID < 20 RA <0.4um
22.0 19.0 1.5 A269 OD < 32 RA <0.8um
27.0 24.0 1.5
28.0 24.0 2.0 CGS-011,H11 ID < 20 RA <0.4um
30.0 25.0 2.5 A213 OD < 32 RA <0.8um
32.0 29.0 1.5 A269
32.0 28.0 2.0
40.0 36.0 2.0
40.0 35.0 2.5
44.0 40.0 2.0
50.0 45.0 2.5

Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base

Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.

R407C Specifications

Class: 2.2 (Non-flammable gas)
Global Warming Potential (GWP): 1774
Ozone Depletion Potential (ODP): 0
Packaging Quantities:
Disposable Cylinders: 1150 units without pallets / 900 units with pallets
Refillable Cylinders: 800 units with pallets / 1034 units without pallets
R407C Applications
R407C is a zeotropic blend composed of difluoromethane (R32), pentafluoroethane (R125), and 1,1,1,2-tetrafluoroethane (R134a). Each component serves a specific function:

R32 provides heat capacity.
R125 reduces flammability.
R134a lowers operating pressure.
R407C is recognized as a long-term replacement for R22, sharing similar performance characteristics. It is widely used in air conditioning systems and non-centrifugal refrigeration systems for medium and high temperature applications, making it an ideal solution in a variety of HVAC setups.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

Formalin is a solution of formaldehyde gas dissolved in water. Formaldehyde is a colorless, strong-smelling gas that is commonly used in a liquid form, as formalin, for various industrial applications. Here are some key points about formalin:
Chemical Composition: Formalin is typically a 37% aqueous (water-based) solution of formaldehyde. The remaining percentage is water.
Uses:
Preservation: Formalin is widely used as a preservative for biological specimens. It helps to prevent decay and decomposition, making it essential in laboratories, museums, and medical facilities for preserving tissues and specimens.
Disinfectant: It has antimicrobial properties, and as such, formalin solutions are sometimes used as disinfectants and biocides.
Textile Industry: Formalin can be used in the textile industry for wrinkle-resistant finishes on fabrics.
Health and Safety Concerns:
Formalin is a strong irritant and can be harmful if inhaled, ingested, or comes into contact with the skin.
Prolonged or repeated exposure to formaldehyde can cause respiratory irritation and may be associated with certain health risks.
Proper ventilation and personal protective equipment are recommended when working with formalin.
Regulation:
Due to its potential health risks, the use and handling of formalin are subject to regulations and guidelines in many countries. These regulations aim to ensure safe practices and protect workers and the environment.

Increased Safety & Durability
450 Liter DOT-4L Designs for on-site movement by fork lift
Safe & easy-to-transport
Eliminate handling of cylinders to reduce risk of potential injury
Galvanized steel pallet & frame
Compact & rugged
Convenient & Customer-Focused
On-site filling
No interruptions to end-use application
Suitable for industrial & CryoBio applications
All valves located at operator level
Fill shut-off
Economical
Reduces cylinder fleet
Reduces product losses during fill process

Virgin Mercury purity = 99.99% Pure by wt min.
- Free from heavy metals
- Packing iron cylinder ( 34.5)kg net weight
- Physical State: Liquid
- Appearance: silver
- Odor: odorless
- PH: Not available.
- Vapor Pressure: 0.002 mm Hg AT 25C
- Vapor Density: 7.0
- Evaporation Rate: Not available.
- Viscosity: 15.5 mP AT 25 dig C
- Boiling Point: 356.72 dig C
- Freezing/Melting Point:-38.87 dig C
- Decomposition Temperature: Not available.
- Solubility: Insoluble.
- Specific Gravity/Density: 13.59 (water=1)
- Molecular Formula :Hg
- Molecular Weight: 200.59 Mercury Packaging:

* 34.5kg virgin steel flask

Calcium chloride is an inorganic salt, which exists as solid or liquid. solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. with different crystallized water contents, it can be dehydrate or anhydrous. liquid calcium chloride is a colorless, clear solution. as calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, it is widely used in snow & ice melting, dust control, oil & gas drilling, moisture-absorbing
According to the content of crystal water in calcium chloride:
(1). Calcium chloride dehydrate
a. Calcium chloride flake dehydrate 74%min; 77%min;
b. Calcium chloride granule/pellet dehydrate 74%min; 77%min
(2). Calcium chloride anhydrous
a. Calcium chloride powder anhydrous 94% min
b. Calcium chloride pellets anhydrous 94%-97% min
according to grade:
(1). Calcium chloride industrial grade
(2). Calcium chloride food grade

US$ 8.55 - 13.85 / Box Get Freight Cost Calculate Margin
100000 Boxes Minimum Order
15 - 60 days Lead Time

Product Details
Model Number : S M L XL-#9227

Brand Name : WinHealth (Future)

Origin : China (mainland)

Small Orders : Accepted

Key Specifications/Special Features:
Gloves are mandatory for surgery or any kind of medical purposes. Disposable gloves are widely used for safety purpose. It's recommended by FDA and other health organizations to use gloves for safety and better performance. Gloves keep you away from bacteria, bloodstain or any types of liquid material that can be harmful. We have different categories here. Such as Latex gloves, powdered and powder free gloves, nitrile gloves and vinyl gloves. These are applicable for food processing, restaurant, or for heavy duty work. If you are allergic to specific gloves then you may try our different types of gloves which will suit you right. Even our gloves are disposable, but it can be used more than once.
Features:
Offers protection from unwanted and dangerous substances.
Superior strength with better puncture resistance.
Beaded cuff ensures easy donning and prevent roll down
Custom design enhances comfort and fit.
No Powder Lubricant Added
Manufactured from 100% Nitrile (Acrylonitrile-butadiene)
Extraordinary strength and resistance while maintaining tactile sensitivity
Provides an alternative solution for individuals who are allergic to natural rubber latex
Made from hypoallergenic, keeping sensitive hands free from irritation and allergic reactions
Excellent resistance from moisture and chemicals
Standards:
Biocompatibility Tested or Biocompatiblity friendly
Resists permeation by a widen range of chemicals compared to other nitrile synthetic latex of the same thickness
Meets and exceed FDA and CE standards
Specifications:
Used in: Auto Industry, Law Enforcement, Tattoo Industry and Many More
Color: Black
Material: Nitrile (Acrylonitrile-butadiene) Synthetic Latex
Glove sizes: Large, Extra-large
Shape: Ambidextrous
Type: Non-sterile, Powder Free
Finger Tip Thickness: 6.3 mil
Fully Textured
Beaded Cuff
100 gloves per box, 10 boxes per case (1000 gloves per case)
Black nitrile gloves eliminate any potential for allergic to latex gloves because they are made of 100% nitrile.
Nitrile Gloves offer three times the puncture resistance of latex gloves of comparable thickness and are resistant to a wider range of chemicals and provide greater resistance to blood borne pathogens as well.

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder