Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35 % - 38%
Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35% - 38%
1) ACACIA WOOD CHIPS 2) PACKING: BULK VESSEL 3) QUANTITY: 10,000 BDMT ~ 70,000 BDMT Quantity: 10,000 - 30.000 BDMT Port of loading: Cai Lan Port, NGHI SON Port,Vietnam Payment terms :100% LC at sight
Bangkirai wood (sawn timber). Multipurpose for decking/flooring. Cutting size as per request. Price is per m3
Keruing wood (sawn timber). Multipurpose for decking/flooring. Cutting size as per request. Price is per m3
Meranti Wood (sawn timber). Multipurpose for decking/flooring. Cutting size as per request. Price is per m3.
Wood chips.
Excellent red pine and other northern wood Sawn timber for construction, and other applications High-capacity and high-quality German manufacturing equipment We bring the best wood from the boreal coniferous forests of Siberia. We supply red pine, spruce, larch, fir, and birch. We sell wood from northern Siberia, with a high density of the wood. We also offer wood from warmer regions at lower prices. We produce products from basic board to special kinds like taruki, dobuchi, etc. We provide basic board according to GOST 26002-83. We also produce according to customer requirements, providing planed wood with precise dimensions. Our drying facilities are top-notch so that we can provide well-dried wood, well below 18%.
paper fiber cutting board and RPET tableware.
TAKUMI Wooden Cutting Boards with Mark Material: Spruce 031040: 330x165x30mm/ 600g Price: EXW USD7.90/pc / MOQ: 70 pcs 031057: 360x180x30mm/ 900g Price: EXW USD9.70/pc / MOQ: 60 pcs 031064: 390x195x30mm/ 1100g Price: EXW USD11.10/pc / MOQ: 50 pcs 031071: 420x210x30mm/ 1250g Price: EXW USD12.50/pc / MOQ: 40 pcs 031088: 450x225x30mm/ 1450g Price: EXW USD14.20/pc / MOQ: 40 pcs 031095: 480x240x30mm/ 1550g/ Price: EXW USD16.00/pc / MOQ: 30 pcs
70 slices/min. ultra-high-speed operation (with standard 8mm blade) Featuring AC servo and special high precision 8mm stainless steel blade, POSEIDON provides uniform slices at ultra high speed of 370 slices per minute. Also, the inverter automatically adjusts slice thickness between 0.5mm and 30.0mm, each 0.1mm. The result is greatly enhanced performance. Minimizes vibration even at ultra-high-speeds (patent pending) POSEIDON incorporates unique built-in vibration measurement device. It is very quiet during operation and vibrations remain low even at the highest speed slicing. Meat detection sensor (minimum detectable height: 20mm) Meat detection sensor for immediate slicing. The sensor detects the edge of product and feeds just in front of the blade to save time for in-feeding. Automatic air gripping system Automatic air gripping system minimizes labor and increases efficiency. Load product and closes the cover, then the unit grips the product automatically. After slicing, it releases the product and stores it in the meat holder. Improved yield (minimum thickness of gripping part: 25mm) Conventional chop cutters are wasteful because they always leave more than 30mm of uncut product. POSEIDON is improved meat holder that has reduced the issue as little as 25mm to ensure a dramatically improved yield. Clamp unit (patent pending) POSEIDON clamp unit holds the product firmly in position. It prevents slippage at the beginning of slicing and minimizes curling of slices. It helps to make sliced products uniform, consistent and appealing. Three different thicknesses from a single block In addition to slicing a block at fixed thickness, it is also available three different thicknesses setting for a single block of meat. Color operation touch panel for easy operation Color touch operation panel with microcomputer control included useful functions such as memorized data, periodic inspections, trouble shootings and electrical parts check mode. Operator friendly, safety and efficiently.
Handled products: i. food raw materials 1. chicken, beef, pork 2. seafood 3. fats (animal/vegetable) 4. fruits 5. sugar ii. industrial raw materials 1. ore (including gemstones): 2. functional film and fabric 3. pulp raw materials/wood.Assembly (business) outsourcing
Teak Wood.
Plywood machine, plywood making machine, plywood production line, veneer lathe, veneer peeling lathe.
Wood logs.
Eucalyptuses wood chips.
Agar wood.
Hardwoods, kwilla, rosewood, vitex, red cedar, pencil cedar, heavy hopea.
Spruce Sawn Timber, Lumber, Sawn Timber, Timber.
Pu 8630, Glued Balsa, Teak, Iroko, Used Vehicle Parts.
