Wire mesh demister, or named wire mesh mist eliminator, is a kind of vapor-liquid separating device. It is widely used in chemical industry, petroleum, vitriol, medicine, light industry, metallurgy, machinery, construction, aviation, sea transportation and environmental protection. Characters: 1.simple structure, light weight; 2.big rate of porosity, small pressure drop; 3.big contact surface, high efficiency of eliminating mist; 4.convenient to install, operate and repair; 5.long life; The wire mesh used in wire mesh demister has to be made from gas-liquid filter mesh according to working condition.
A demister, or also known as mist eliminator, is a high efficiency separation device often fitted to vapor liquid separator vessels to enhance the removal of liquid droplets entrained in a gas or vapor stream. Demisters may be a mesh type coalescer, vane pack or other structure intended to aggregate the mist into droplets that are heavy enough to separate from the vapor stream. Mist eliminators/ demisters are fabricated from knitted materials with interlocking asymmetrical loops of metal or plastic with typical diameters being 0.1 – 0.3mm. Special applications for wire diameter 0.35mm to 0.024mm, tube width 1/4" to 42" diameter. 2.DEMISTER Materials: Stainless Steel wire: 200, 300 and 400 series-AISI201?202?301?302?304?304L?321?316?316L,410S, etc. Copper wire, Aluminium wire, Nickle wire, Titanium wire, Inconel, Monel, Hastelloy wire... Plain Steel, Galvanized Steel... Polypropylene, Polyethylene, PVC, Teflon(PTFE), Nylon, etc. Stainless steel wire with cotton thread, fiber glass, etc. 3.FIXING METHODS&GRID The demister should be horizontally fixed and supported. At the bottom or both the top and the bottom, a support grid which is welded with FB 25X3t, RB6Ø of the same material as that of the demister pad at proper intervals (APP150mm), is used. For fixing the grid and the pad, RB6Ø or 1.6Ø tie wire is used. 4.DEMISTER FEATURES (Mesh Pad type) 1).It shows 99% efficiency under general conditions and velocity (1~3m/sec or higher). 2). Over 98% open area is guaranteed under any conditions so pressure drop caused by the use of the demister can be disregarded (0.1”~1.0 W/G). 3). It can be made of any material suitable for the given temperature and corrosion-resistance. 4). It is possible to install by use of M/H so it is easy to handle. 5). There is no restriction in the conditions, place, and size for use. It is install-able on the existing systems. 6). Self-cleaning is possible. It is semi-permanent so it is economical. 5.USE OF DEMISTER 1).Vacuum Tower - The treatment quantity by the demister goes up by 35%. The quality of oil gas is improved. 2). Absorber - Some gasoline plants use a glycol absorber (Demister mounted) so the installation cost is being repaid within a month. 3). Knockout Drums and Separators - If Demister is used, ?inch drum is sufficient. 4). Gas Separator Vessels - Hydrocarbon in gases is collected so gas of 1/0.1 billion purity is produced out. 5). Evaporator - Product loss goes down and purity is remarkably improved. 6). Scrubber - In the field of caustic soda, the demister is used to prevent air pollution. 7). Distillation Column - If Demister is used, the cost for distillation goes up, the quantity of treatment increases by 20%, and purity is remarkably improved. 8). Dust Collectors - The dust collector of a wet type has excellent collection capacity.g is possible. It is semi-permanent so it is economical.
Stainless Steel Wire Mesh is manufactured in both Square & Rectangle openings for different uses. We offer this Stainless Steel Wire Cloth in a wide range of openings and configuration of wire thickness in different types of weaving such as Plain Weave, Twill Weave, Plain Dutch Weave, Twill Dutch Weave etc. Different types of� weaving give you different aperture &� vary the texture from soft & fine to rigid. The Stainless Steel Cloth is usable under high pressure, high temperature, and high tension and gives you high durability. We have wide range of ready stock. Features: Simpleweaving Elegant High quality Specifications: Material:Stainlesssteelwire304l,306l Width:Upto4m Whole size: 2 Mesh to 500 Mesh
Suitable for Construction, decoration, safety protection.
we are able to offer a superior quality range of Reinforcement Mesh. All our products are available in various sizes, designs, and shapes at market leading prices to meet the demands of customers.
Wire mesh screen, wire mesh demister, wire mesh pad and rolls..
Our Quality IBC liner steel cage WIRE MESH FOR IBC TANK FRAME are great steel cage mesh for IBC Frame for use in Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company. The Core Components Includes PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
Materials: carbon steel and stainless steel (302,304,304L,316,316L etc). Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters. Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone . We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .
Wireharness for auto, airspace and equipment
Plaster Mesh
Welding Machine
Our wire harnesses are designed to meet a variety of electrical and electronic applications offering both standard options and customized solutions tailored to your specific requirements Key Features Versatile Applications Suitable for automotive industrial aerospace and consumer electronics Standard Options A range of preconfigured wire harnesses available for quick and easy deployment Customized Solutions Tailormade wire harnesses designed to fit your unique specifications including size connector type and wire gauge Quality Materials Constructed with highquality durable materials to ensure reliability and longevity Expert Engineering Our team of specialists will work closely with you to create effective solutions that meet your project needs Testing and Quality Assurance Each harness undergoes rigorous testing to guarantee performance and safety standards Whether you need a standard wire harness for a common application or a bespoke solution for a specialized project we have you covered Contact us today to discuss your requirements
Wire size: 0.016 inch dia Mesh size: 20 mesh Opening area: 46.2% Opening width: 0.034 inch 48 inch wide x 100 linear feet Moc: stainless steel a316 Oem: gerard daniel & co, p/n: 9319t87 Test certificate required
Galvanized Crimped Wire Mesh material: carbon steel hole size: 25X25 mm mesh size: 1275X2000mm wire size: 3.5mm
Rare-precious metal wire mesh, demister, filter disc, filter tube.
Stainless Steel 304 Wire Mesh Material â?? SS304 Wire Diameter â?? 0.28mm Mesh size 3x4mm Width â?? 0.3m Length (roll) â?? 25m Weight approx. 7KG per roll
Wire mesh demister, or named wire mesh mist eliminator, is a kind of vapor-liquid separating device. It is widely used in chemical industry, petroleum, vitriol, medicine, light industry, metallurgy, machinery, construction, aviation, sea transportation and environmental protection, etc.. All imported production equipments for ethane, synthetic ammonia, chemical fiber and so on use wire mesh demister as vapor-liquid separating device. It is mostly used to separate liquid drop with diameter The working principle is as following When the air with mist rises up at certain speed and gets through wire mesh, mist will collide with wire and will be attached on the surface of wire in the effect of rising inertia. The dispersion and sedimentation makes mist form bigger drop and form a connection point. This drop will become more and more bigger till it is heavier than the composition forces of gas rising force and liquid's surface tensile under the action of wire's wetting property, liquid's surface tensile and wire's capillarity; therefore, liquid drop will be separated and fall off from wire. It nearly doesn't contain mist after gas gets through wire mesh demister. It improves operation condition, optimizes technical index, reduces equipment corruption, prolongs equipment's life, increases processing capacity, reuses valuable material, protects environment and reduces atmosphere pollution to separate mist from gas This product is simple in structure, small in size, high in the efficiency of eliminating mist, small in resistance, light in weight, convenient to install, operate and repair. As for the mist with granularity not less than í¦3-5um, its collecting efficiency reaches 98%-99.8%. Pressure slop in which gas gets through demister is very small only 250-500Pa, so it is good for improving equipment's production efficiency.
304/316 stainless steel wire mesh(anping manufacturer) Stainless steel wire mesh/304 stainless steel wire mesh/weaving stainless steel wire mesh/stainless steel woven wire mesh/stainless steel wire mesh cloth/plain weave stainless steel wire mesh/twill weave stainless steel wire mesh 1.Standard:gb/t 5330.1-2000, gb/t 19628.2-2005 2.Material of stainless steel wire mesh: 302, 304, 304l, 316, 316l, 321 3.Stainless steel wire meshweave type:plain weave, twill weave, three heddle weave, five heddle weave, plain dutch weave, twill dutch weave, reverse plain dutch weave, reverse twill dutch weave. 4.Roll sizes: standard roll width: 1m-2m, standard roll length: 30m-50m. 5.Mesh size: 3-635mesh 6.Wire gauge:0.25mm-4.0mm 7.Characteristics of stainless steel wire mesh: (1) wear resistance, high strength, long life (2) high air permeability, good drainability, easy cleanability (3) high temperature resistance, corrosion resistance 8.Packing of stainless steel wire mesh: inside with a moisture-proof wrapping paper or other packaging materials Outside wooden boxes or wooden pallets available 9.Application of stainless steel wire mesh: (1) widely used in aerospace, petroleum, chemical industry (2) scientific research and transportation industries (3) electroplating industry for pickling mesh, printing mesh (4)battery industry and a variety of sophisticated filtration products 10.Usage:filter disc, filter cartridge, conical strainer, microphone head, test sieves, wire basket, battery mesh, coal washing mesh, window screen, paper making mesh, oil vibration screeen. Inside with a moisture-proof wrapping paper or other packaging materials
Perforated metal, holland wire mesh, stainless steel wire mesh, wire mesh demister, filter mesh, wire mesh products.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
