Small wind turbine generator. Accumulators full charge time: about 8 hours > Mast height/weight: 9m - optional /150kg > Weight: 300kgs (without mast).
Basic Parameters Rated Power(kw) 60 Survival Wind Speed(m/s) 45 Max Power(kw) 65 Working Wind Speed(m/s) 1-25 Rated Voltage(v) 420/600 Rated Wind Speed(m/s) 10 Rated Rotation(r/min) 100 Blade Length(m) 8.6 Cut-in Wind Speed(m/s) 1 Blade Material FRP Cut-out Wind Speed(m/s) 25 Generator Life(year) 20 Some Key Technology Control Method Adjust Speed Method centrifuge variable pitch Brake Method electromagnetic Generator Generator Configuration 3-phase 380/220v 50/60hz Generation Type 3-phase permanent magnet Protect Class IP54
Rotation speed120r/min Blade materialFiberglass Number of blades3 pieces Turbine weight75kg Package size (m)2.0*1.2*1.2 PackingPlyboard and steel tubes Tower height 6m Tower type Steel (q235b) Plyboard and square steel tube material package, 2.0m x 1.2m x 1.2m
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.
Wind turbine generator we provide wind turbine generator with capacity rom 600kw- 2mw with German or international standard quality. The quotation is of competitiveness with satisfied quality. S43/600KW Wind Generator Sets Main parameters: installed elec. output 600KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s/operating temperature -30fpC-45fpC/total weight 65000kg (Rotor :rotor diameter 43m/s wept area 1452m2/number of blades 3/rotational speed 26.8or17.9 rpm/power regulation, stall (Blade:designation,LM19.1/FD43-600 made in China/aerodynamic profile FFA W3 NACA 634/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 1960kg (Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:56.6/Rated power 645KW/efficiency 0.97/rated torque 230KN.m (Generator: rated output 600or 125KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1517or1013rpm (Tower: height 38.5or48.5m/weight 33000 or45800kg (Yaw system :type, active/yaw rate 0.2 S48/750KW Wind Generator Sets Main parameters: installed elec. output 750KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s (Rotor: rotor diameter 48.4m/swept area 1840m2/number of blades 3/rotational speed 22.3or14.9 rpm/power regulation, stall (Blade:designation,LM23.2/aerodynamic profile, NACA 63xx-634xx/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 3050kg f(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:68.2/efficiency fª0.97 (Generator: rated output 750or 185KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1520or1013rpm (Tower: height 65m/weight 75000kg different dimensions
Rotor diameter: 18.0m Blades quantity: 3pcs Direction: always upwind Blades material: Carbon fiber reinforced plastic Rated output: 50KW Power supplied to Grid 60KW [in 5seconds] working voltage: DC500-800V,AC380-400V Annual average energy production: 110MWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 3.0m/s Nominal wind speed: 10.0m/sï¼?33.6mphï¼? Storm-stand: up to 55m/s Max rotate speed: 60r/min Wind turbine type: PM 40 poles synchronous generator, Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch setting Over-speed Protection -Aerodynamic braking system+ -hydraulic rotor brake Speed Regulate and Shut Down Methods -Electro-Yawing, Positive Pitch and -Electric Magnet dumping brake Gearbox: None, Direct Drive Hub height (m) 18-20-24-35 (free-standing or hydraulic tower)
Rotor diameter: 12.56m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output: 30KW Power supplied to Grid 32KW [in 5seconds] working voltage: DC500/600V,AC220V/380V Annual average energy production: 70MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.5m/s Nominal wind speed: 12.0m/s Storm-stand: up to 55m/s Max rotate speed: 100r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Electro-Yawing,Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Tower style and height Free-standing tower 15m, 18m up to 35m.
Rotor diameter: 12.35m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output Power: 20KW Power supplied to Grid 24KW [in 5seconds] working voltage: DC360V/500V,AC220V/380V Annual average energy production: 50MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.0m/s Nominal wind speed: 9.0m/s30.3mph Storm-stand: up to 55m/s Max rotate speed: 120r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Auto-Yawing, Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Battery charge time: SENWEI-
Rotor diameter: 5.0m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output Power: 5Kw , 5000W Maximum output power: 9500W working voltage: DC48/96/120/240/500V,AC220V/380V Annual average energy production: 11315KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 10.0m/s22.3mph Storm-stand: up to 50m/s Max rotate speed: 240r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch-www.windpowercn.com Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Rotor diameter: 3.5m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output power: 2000W Maximum output power: 2950W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 4672KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 8.0m/s17.8mph Storm-stand: up to 50m/s Max rotate speed: 400r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch- Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Power: 600w Rotor diameter: 2.5m Blades quantity: 3 pcs Blades material: frp (composite material) Rated speed: 400r/min Rated output power: 600w Max output power: 750w Output voltage: dc24v/ac220v Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Speed regulation: yaw& magnetic resistance Charge control: aic (automatic intelligent control) Wind turbine type: pmg (on constant magnets) Working temperature: from -40 to +60 c Annual average energy production: 1500kwh Recommended accumulators: 300ah Accumulators full charge time: about 8 hours Tower type: pull wire tubular tower or standarding alone tower(optinal) Tower height:6m (optional) weight: 40kgs (without tower) Can supply power for: color tv, lighting, electric fan and charger. Packing is by plywood box.
Power: 1KW Rotor diameter: 2.8m Blades quantity: 3 pcs Blades material: FRP (composite material) Rated speed: 360r/min Rated output power: 1000W Max output power: 1500W Output voltage: DC48V/AC220V Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Speed regulation: yaw& magnetic resistance Charge control: AIC (automatic intelligent control) Windturbinetype: PMG (onconstantmagnets) Working temperature: from -40 to +60 C Annual average energy production: 2500kWh Recommended accumulators: 600Ah Accumulators full charge time: about 8 hours Tower type: pull wire tubular tower or cone tower(optinal) Tower height:6m (optional) Weight: 45kgs (without tower) Can Supply Power For: water pump, TV, Washer, Illumine, Fanner, Charge. Packing is by plywood box.
Main Parameter: Model: TR10.0-20KW Rated Power: 20KW Max Power: 25KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 360V Start Wind Speed: 2m/s Rated Wind Speed: 12m/s Maximum Wind Speed: 45m/s Rotor Diameter: 10.0m Rated Rotor Speed: 90r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 18m or higher
Main Parameter: Model: TR8.0-10KW Rated Power: 10KW Max Power: 12KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 8.0m Rated Rotor Speed: 180r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR6.4-5000W Rated Power: 5000W Max Power: 6000W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 6.4m Rated Rotor Speed: 200r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR3.2-1000W Rated Power: 1000W Max Power: 1500W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 48V Start Wind Speed: 2m/s Rated Wind Speed: 8m/s Maximum Wind Speed: 35m/s Rotor Diameter: 3.2m Rated Rotor Speed: 400r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 6m ,9m or 12m
Rotor diameter: 8.0m Blades quantity: 3pcs Direction: Always downwind Blades material: Carbon fiber reinforced plastic Rated output power: 10000w Maximum output: 12500w Working voltage: Dc240v/500v, ac220v/380v Annual average energy production: 20mwh (in rate 5m/s wind speed) Working wind speed: 3-35m/s Initial wind speed: 2.0m/s Nominal wind speed: 10.8m/sï¼?36.4mphï¼? Storm-stand: Up to 55m/s Max rotate speed: 160r/min Wind turbine type: Three-phase, pmg alternator Working temperature: From -40 to +60 c Blade pitch control Variable pitch-www.Windpowercn.Com Over-speed protection Aerodynamic brake + electromechanical disc brake Shut down methods Positive blade pitch Gearbox: None, direct drive
1.Magnetic saturation generator design, 20years designed life. 2.2-2.5m/s start-up wind speed under low torque start-up technique. 3.Independent power supply 4.Blades are casted into molding at one time with balance up to 99%. 5.Bearings import from japan (nsk), long service time (5 years maintenance-free). 6.Low cost and low noise 7.Low cut in wind speed (3m/s) to guarantee the maximum generation at low wind speed. One pc in one plywood
Main Parameter: Rotor diameter: 5.0m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output power: 3Kw, 3000W Maximum output power: 5400W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 6570KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 10.0m/s22.3mph Storm-stand: up to 50m/s Max rotate speed: 240r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours Power Curve
Rated votage¡êo48v Working wind speed: 1.8-25m/s Survival max wind speed¡êo40m/s Working temp.: -30¡«50¡æ As buyer's request
