WDM-PON can mix 1625nm or 1650nm of OTDR’s operating light and 1310nm/1490nm/1550nm of communication light into one optical fiber cable in PON network cable monitoring system. Communication light and test light are transmitted in one fiber, which can not only monitor the quality of transmission line and also need not to use another line to test. In that case, optical fiber path resource is saved.
Over 40 kind of jaggery items, , , and 50 types of spicy items. 1 packet, 200grams, 12cm x 15cm
Huawei switches layer 2, layer 3, high end, huawei routers, huawei olt and ont, genexis gpon olt, genexis ont, syro, xpon ont, epon onu, xpon voice ont, xpon ac ont, xpon wifi ont, epon wifi onu, epon 4 port onu, pon sfp 7db, 9db, optical power meter with vfl, edfa with wdm, pon meter, dual band router, poe switches, fast connector, media converters, sfp modules, gpon olt 16 port, spliter, lgx plc, ratio coupler, fms, liu, splicing machine, dac cables, fiber patch cords.
Huawei & ZTE transmission, access, data communication, wavelength division, SDH, WDM, router, gateway, switches, PON, DSLAM, OLT, FTTX, base station, Including C&C08, optix SDH, PTN series, wavelength division OTN series, ONU, PON series, NGN (ua5000), ADSL VDSL DSLAMS.
Brief introduction: St805 pon power meter is specially designed for pon network construction and maintenance which can be connected between olt nad ont. The voice, data, video signal online can be measured and displayed synchronously with this meter. Key features 1. Test the three wavelength of the pon network synchronously: 1490nm, 1550nm, 1310nm 2. Can test the burst mode signal of 1310nm 3. Can set the threshold value, upload data, calibrate the wavelength through management software. 4. Can save 1000 records and upload the records to the management software 5. Supply 10 groups threshold values 6. En menu display 7. Auto shut off backlit 8. Real-time display Technical specifications Standard wavelength: 1310(up); 1490(down);1550(down) Pasband(nm):1260f+1360; 1470f+1505; 1535f+1570 Range(dbm): -40f++10; -40f++10; -40f++20 Isolation.1310nm++db++: ; >40; >40 Isolation.1490nm++db++: ; >40; >30 Isolation.1550nm++db++: ; >40; >40 Accuracy: Uncertainty++db++:F+0.5 Polarization relevant loss(db++:
Description: The Media Converter ( TR100-LD13/LD15 , TR1000-LD13/LD15 , TR100-L13 , TR1000-L13 ) series consists of a series of 10/100Base-TX to 100Base-FX Auto-negotiation mode Media Converter. User now may upgrade or extend their existing 100Base-TX or even 10Base-T network into fiber network easily. The Media Converter ( TR100-LD13/LD15 , TR1000-LD13/LD15 , TR100-L13 , TR1000-L13 ) series are fully compliant with IEEE802.3 Ethernet standard. The RJ45 (STP) port of TR100 support auto-negotiation functions, provide a maximum bandwidth of up to 200Mbps (100M full duplex) or up to 20Mbps (10M, full duplex) for distances of up to 2Km - when using multimode fiber cable; or up to 100km - when using single-mode fiber cable. Installation and operation of the TR100-LD13(15) / TR1000-LD13(15) is simple and straightforward. 14*14*24 CM.
Beautiful Copper Cake Tray Measurement - Dia - 4 inches, H- 15 inches, Free Shipping within India (Upto 5 Kg ) Domestic Delivery : 12-15 Days International Delivery: 4-6 Weeks Creating and Packing Options Available (Extra Charges Apply) and are mandatory for "Fragile / Breakable Items". *Please Note: Estimated delivery time for International Delivery of Lights, Furniture, Interior Solutions and Bridal Registry Products will be 6-8 Weeks.
Polarization-maintaining optical wavelength division multiplexer is an optical fiber wavelength division multiplexer made of polarization-maintaining optical fibers.It is Widely used in optical communication networks, optical EDFA, sensing systems and other optical communications.
Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path. Features Wide operating wavelength range Low insertion loss Ultra flat wide passband High channel isolation High stability and reliability Epoxy-free on optical path Applications Testing instruments Ftth tri-play system
Flyin Optronics' MMWDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path. Features l Wide Operating Wavelength Range l Low inertion loss l Ultra Flat Wide Passband l High Channel Isolation l High stability and reliability l Epoxy-free on Optical Path Applications l System Monitoring l WDM Network l Transmitters and Fiber lasers l Fiber Optical amplifier l Fiberoptic Instruments standard package
Product features: Highly reliable case, strong adaptive capacity to environment 1u case, good shielding measures. Layer 2 aggregation switching Layer 2 wire-speed forwarding; support rich layer 2 protocols 4k mac address list Uplink port supports electronic port modules and optical port modules, which can be configured flexibly as required Perfect network management function Support gui based graphical interface¡¡ê Support in-band management, out-of-band management Support online upgrade of device software Strong qos function Support flexible dba, uplink and downlink traffic rate-limited Support ip tos, ieee802.1p Port based traffic control, traffic shaping¡¡ê Supports up to 256 llid. Rich oam function Support onu automatic identification, automatic finding, and automatic registration Support the function of automatic loop back test to single link Strong vlan function, including vlan stacking, trunk, translation Support flexible controllable multicasting, support igmp snooping Port features: 1 pon ports (1.25g) 1 uplink ports (1g) (electronic ports and optical ports options) 1 management ports (special software management) 1 console port Physical features:
Model PON power meter 1310nm 1490nm 1550nm Pass Zone(nm) 12601360 14701505 15351570 Isolation (dB) >40@1490 >30@1310 >40@1310 Isolation(dB) >40@1550 >40@1550 >40@1490 Measurement Range(dBm) -40+10 -40+10 -40+20 Measurement Accuracy Connatural uncertainty(dB) ±0.5 Linearity(dB) ±0.1 Passing through insertion Loss(dB)
l With 4 PON ports or 8PON ports. l Support 256/512 ONUs (1:64 splitting retio, 10km transmission distance). l Provide 8GE uplink ports and and 8 SFP Combo ports. l L2 full-line-speed ability l MAC address table: 16K l VLAN support: 4096 l ONU auto find and auto register. l Support dynamic bandwidth distribution. l Support online upgrade and batch upgrade l Support in-band and out-of-band management interface l Support CLI, TELNET,EMS management mode. l Support dual-redundancy
32 ports EDFA with WDM: JDSU pump laser with Double Power Supply
The PM FWDM provides wavelength division multiplexing while maintaining signal polarization. The PM FWDM is characterized with low insertion loss,high return loss,high extinction ratio and excellent environmental stability and reliability. It is ideal for high speed WDM network systems.
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM devices. PM Isolator & WDM Hybrid Features Applications Low Insertion Loss Fiber Laser High Return Loss Fiber Amplifier High Isolation Testing Equipment High Extinction Ratio High Reliability & Stability Specifications Parameter Value Stage - Single Dual Single Dual Signal Channel Signal Wavelength Range 1064�10nm 1550�15nm Max. Insertion Loss 2.6dB 3.8dB 0.9dB 1.0dB Typ. Peak Signal Reversed Isolation, at 23 40dB 52dB 40dB 52dB Min. Signal Reversed Isolation, at 23 28dB 45dB 28dB 45dB Min. Isolation (Com to Pass @ Ref band Wavelength) 30dB Min. Extinction Ratio at 23 20dB Reflection Channel Wavelength Range 960~990nm Max. Insertion Loss 0.6dB Min. Isolation (Com to Ref @ Pass band Wavelength) 15dB Min. Extinction Ratio at 23 18dB Min. Return Loss 50dB Max. Insertion Loss Thermal Stability 0.005dB/ Max. Optical Power(CW) 300mW Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator;
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device. PM Tap & Isolator & WDM Hybrid (Faraday Based) Features Applications Low Insertion Loss EDFA High Return Loss Pump Laser High Extinction Ratio Optics Cutting High Isolation Research Specifications Parameter Unit Value Stage - Single Dual Single Dual Signal Wavelength nm 1064±5 1550±15 Signal Wavelength Range nm 1020~1080 1520~1580 Max. Excess Loss, λc, at 23 2.5dB 3.5dB 1.3dB 1.4dB(Input to Output) Min. Signal Isolation, λc,±15 at 23 35dB 45dB 28dB 45dB(Output to Input) Isolation for Channels Signal Channel 30dB Pump Channel 12dB Tap Ratio 1~50% Pump Wavelength Range 980±10nm Max. Insertion Loss (Pump Channel) 0.7dB Min. Extinction Ratio at 23, only for PM Channel 20dB Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max.Tensile Load 5N Operating Temperature -5~+50 Storage Temperature -40~+85 Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's 1x2 Polarization Maintaining Fused Type WDM, 1064nm/980nm, 1550nm/980nm, 1550nm/1064nm. Fused Type PM Fiber WDM Features Applications High Extinction Ratio Testing Instruments High Isolation Coherent Communication Low Insertion Loss EDFA High stability & Reliability Fiber Sensor Specifications Parameter Value Type 980/1550 1064/1550 980/1064 Operating Bandwidth ±15nm Max. Insertion Loss Signal Port0.7dB 0.7dB 0.8dB Pump Port 0.7dB 0.7dB 0.8dB Min. Extinction Ratio 20dB 20dB 18dB Min, Isolation 18dB 18dB 13dB Min. Directivity 55dB Max. Return Loss 50dB Max. Optical Power(CW) 3W Fiber Type PM Panda Fiber Package Dimension Ï?3*54mm(bare fiber, 0.9mm loose tube) 90*20*10(0.9mm/2.0mm/3.0mm loose tube) Operating Temperature -5~+75 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's FWDM Device is a device to combine the two different wavelengths from the fibers to one output fiber. PM FWDM Device Features Applications Low Insertion Loss CATV System High Return Loss CWDM/DWDM Module High Reliability & Stability EPon/Gpon Networks Specifications Parameters Values Type 0698 5598 5506 5548 Transmission Wavelength 1020~1080nm 1520~1580nm 1520~1580nm 1535~1565nm Reflection Wavelength 960~990nm 960~990nm 1020~1080nm 1480±10nm Max.Insertion Loss of Transmission Channel 0.8dB 0.7dB 0.8dB 0.8dB Max.Insertion Loss of Reflection Channel 0.6dB 0.5dB 0.6dB 0.6dB Min.Transmission Isolation@Reflection Wavelength 25dB 30dB 25dB 25dB Min.Reflection Isolation@Transmission Wavelength 15dB 15dB 15dB 15dB Max.Channel Flatness 0.4dB Min.Extinction Ratio at 23 18dB Max. Wavelength Thermal Stability 0.003nm/ Max. Insertion Loss Thermal Stability 0.005dB/ Min.Return Loss 50N Max.Power Handling (CW) 300mW Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
