Water Cooled Industrial Chiller Suppliers and Manufacturers

PRODUCT NAME: Water-cooled Industrial Water Chiller MODEL NO.: AMC-3W AMC-5W AMC-8W AMC-10W AMC-12W AMC-15W AMC-20W AMC-25W AMC-30W Aumax® is a famous supplier of Water Cooling Tower, Air-cooled Water Chiller, Water-cooled Water Chiller, Industrial Water Chiller, Mold Temperature Controller, Screw-compressor Water Chiller etc. Welcome to contact us to know more. Note 1)The cooling capacity is measured when the outgoing water temperature is 12°C and ambient temperature is 30°C. 2) The standard power supply is 3Ã?, 380V, 50HZ. Other power supply is available. Application: AMC-W Series Water-cooled Industrial Chillers are used to supply low temperature water to cool plastic mold and speed up molding process and shorten cycle time. The water chillers also can improve the product quality. The water type chillers should be cooperated with cooling tower for the heat removing of condenser. The water chilling machine can also be used to cool the hydraulic oil of injection molding machine. AMC-W Series water chillers not only can be used in plastic molding industry, they are also applied to electroplating, electronic, textile, machine tools, etc. Our Drying & Dehumidifying series including Hopper Dryer, Honeycomb Dehumidifier, Cabinet Dryer, Dehumidifying Dryer, Dehumidifying Drying Loader Unit. Best quality and competitive price. Welcome. Features: Machine can supply chilled water with temperature between 5~35??. Global top brand compressor, water pump, fans and electric parts, high performance and low power consumption. Optimized heater exchanger provide high cooling efficient. Stainless steel water tank and pipe keeps water in good quality. High precise PLC and temperature controller control temperature deviation less than ±1??. Overload protector to protect water pump, compressor and air fans. Fixed with wheels, easy to move.

Hero-tech industrial water cooled chiller hti-w series Product introduction Hti-w series industrial chiller is mainly applied in plastic & rubber industry; it can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency. They are also widely used in metal working, mechanical & engineering, chemical & pharmaceutical, food & beverage, laser, electronics industry, textile, electroplate, semi-conductor testing, water jet, vacuum coating, construction and military, All nessesary safetey devices Data based on r22, if r407c, cooling capacity 5% decreased based on r22 3ph 380v/50hz, If sepcial requirements, pls keep us noted Standard export wooden case

Water Chiller Model : RO-3W Parameters: 1.Cooling capacity(kw):9.5 2.The Rate Of Cold Water (m3/h):1.65 3.Water Tank(m3):0.038 4.Compressor Power(KW):2.25 5.The Rate Of Cooling Water(m3/h):2.06 6.Power Supply:3phase-380/415V-50/60Hz 7.Refrigeration:R22/R134A/R407C 8.Dimension LWH(mm):1860*540*930 9.Weight(KG):120. Wooden case.

Abilii (A) series chiller is a kind of air cooling integrated chiller for medium-large scale industrial equipment. It adopt double plate type condenser, air come in from side ,out on top. Better for environment, blue hydrophilic film condensation fin heat with highly exchange efficiency, beautiful and convenient cleaning. Humanized design easy for observation and parameter setting, reasonable structure and flexible configuration, it is a universal supporting chiller for refrigeration of medium-large industrial equipment.

PRODUCT NAME: Air-cooled Industrial Water Chiller MODEL NO.: AMC-3A AMC-5A AMC-8A AMC-10A AMC-12A AMC-15A AMC-20A AMC-25A AMC-30A Aumax® is a famous supplier of Water Cooling Tower, Air-cooled Water Chiller, Water-cooled Water Chiller, Industrial Water Chiller, Mold Temperature Controller, Screw-compressor Water Chiller etc. Welcome to contact us to know more. Note 1The cooling capacity is measured when the outgoing water temperature is 12°C and ambient temperature is 30°C.  2) The standard power supply is 3Ã?, 380V, 50HZ. Other power supply is available. Application: AMC-A Series air cooled industrial chiller are used to provide chilled water to cool injection mould, so that speed up the product molding process and shorten molding cycle time, also improved the product quality. The machine can also be used to cool the hydraulic oil of injection molding machine. AMC-A Series water chillers not only can be used in plastic molding industry, they are also applied to electroplating, electronic, textile, machine tools, etc. Aumax® Manufacturing Air-cooled Water Chiller, Air-cooled Industrial Water Chiller with high quality, used to provide chilled water to cool injection mold. They are applied to electroplating, electronic, textile, machine tools, etc. Features: Global top brand compressor, water pump, fans and electric parts, high performance and low power consumption. Optimized heater exchanger provide high cooling efficient. Stainless steel water tank and pipe keeps water in good quality. High precise PLC and temperature controller control temperature deviation less than ±1??. Overload protector to protect water pump, compressor and air fans. Fixed with wheels, easy to move.

200KW COOLING CAPACITY 1) The choice of imports of semi-closed original double-screw compressor, reciprocating compressor, compared with the traditional, high efficiency, quiet operation, simple operation and long life. 2) using the world famous brand refrigeration parts, to ensure the quality and stable unit. 3) Evaporator,condenser threads are using the latest high efficiency and ensure a good cooling unit performance. 4) Independent of the cooling loop, separate maintenance and repair without affecting the machineâ??s use. 5) The unit uses micro-computer PLC control, energy control system with the compressor section can be timely and accurate cooling capacity control mechanism and the cooling load matching, to ensure the most efficient plant operation, lowest energy consumption and achieve energy-saving and reliable operation. 6) Able to monitor the setting of actual temp, and display temp, trend in hours or daily. 7) Power : 3ph, 380v/220v/200v/415v 50HZ/60HZ 8) Refrigerant Type: R22 / R134a / R407c / R404a /

Industrial water cooled chillers are designed by Eurasian Freezing Equipment Co., Ltd. for industrial cooling purpose, it can satisfy cooling needs of industrial process and industrial products. Chilled water temperature adjustment range is 10-20 degrees. In addition to the standard specification, various of non-standard units can be customized to meet specific end-users requirements. Especially the integrated industrial water chillers which with small volume, is convenient to install and easy to operate,can save space and cost for the customers.Units can be used in electronics, biology, plastic fields, chemical, pharmaceutical, industrial processing equipment and food processing or other industrial fields. Our company also produce some special units like power supply industrial chiller, sea water source air-conditioning chiller units. Cooling capacity: 10KW - 168KW Refrigerant: R22, R407C, R134A etc. optional

Water Cooled UV Curing Systems Shenzhen Lando Company supply for Portable Laser Water Chillers cooled uv led curing systems and Uv Light Curing Equipment.Our Water Chillers Systems which cooling light curing systems ,also our industrial laser water chillers would be application for cooler CO2 tube . UV LED Curing Water Cooled Performance : ?Application : UV LED Curing Water Cooled , UV Printer Chillers or other industrials . ?One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically ?switch to appropriate operating temperature. Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Industrial Water Chillers Cool CO2 Laser Tube Main Feature: * Compact thermolysis type industrial water chiller * Long working life and simple operation * Equipped with water flow alarm and over temperate alarm * Radiating capacity: 50W / °C * CE and ROHS certified * Power supply: 110 V or 220 V * Multiple alarm functions: Compressor time-delay protection, compressor over current protection, water flow alarm and over high / low temperature alarm www.lando-chillers.com Email : sales@cnlando.com

Industrial chillers water cooled 1.Standard and customer specified 2.Cooling units with open system 3.Chillers: close system, compressor cooling 4.Split arrangement, compact units 5.Water or air cooled 6.Execution with different heat transfer media 7.With or without energy saving free cooling system 8.Operating temperature -50ípC to 60ípC 9.Capacity for heating/cooling up to 3000 kW Option: 1.Free cooling, compact- or split design, PLC 2.Water analysis/water treatment, layout for demineralized water or ultra pure water possible, with or without monitoring of Ionization 3.Finish in different qualities of stainless steel piping Application : Process engineering, plastic-, rubber- and glass industry Standard wooden case

h cooling efficiency. Aluminum fin condenser---air cooled type. Shell and tube condenser¡a water cooled type. R22, r404a refrigerant for option. 380v-415v/50hz 3ph for standard design. Different design available on request. Application Htlt-a/w series low temperature chiller is specially designed by hero-tech are widely used in pharmaceutical, chemical and bioengineering industry. The temperature is adjustable in the range of -35/+5. Cooling capacity is based on 40 condensing temperature. Standard export wooden case

The industrial chiller has the following features: 1. The industrial chiller is divided into two categories: water-cooled chiller and air-cooled chiller. Water-cooles chiller cooled by water, using with cooling tower and water pump, the other cooled by fan, can be used independently. 2. Our compressor is imported from italy, france and so on, being of high-quality built-in safe protection, with low noise, the electricity of province is durable. 3. Cooling capacity range: 9.8kw~189kw 4. Normal conditions: chilled water inlet temperature is 20 degrees, outlet temperature is 15 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in 5-30 degress range according to customers' request, and the lowest temperature can arrive -25 degress. 5. Stardard input power: 3p-380v-50hz, allowable fluctuate voltage: 161;¨¤ 10%, allowable voltage difference in phase: 161;¨¤ 2%, can also be customized according to customers'request 6. The quantity of compressor can be one or two, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not. 7. The quantity of compressor can be 1 to 4, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not. 8. Use plc microcomputer control from france schneider, both english and chinese human-machine interface. 9. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year. 10. Our standard refrigerant is r22, but you can choose to use environmental refrigerant such as r407c, r134a or r507 . Weight:120kg Dimensions:890*500*840mm

Product features: 1. High Efficiency The units can be equipped with heat recovery. If using as air-conditioning, the recovery heat will be 30% -80% of the total cooling capacity. The temperature of hot water can reach 70 degrees. While using recovery heat the unit efficiency can be increased 5%. 2. Running stable It has 7 safe protection functions to ensure the unit running normally. With double compressors installed, if one compressor malfunction, the other compressor will keep working properly. 3. Intelligent management Visual touch screen control system makes operation very easy. timely feedback for various of malfunction information. The control system can be connected with users central control system, then customers can monitor the running status of the unit at any time. 4. Easy installation and maintenance The units are filled with refrigerant and lubricant before delivery, customers only need to connect the inlet pipe, outlet pipe and power to run. The control interface directly display the malfunction contents, its much easier for customers to know and sort out problems. 5. Various of refrigerant to meet customers specific requirements. Refrigerant: R22.R407CR134a. are optional

Product features 1.Heat dissipation mode of water cooling, realizing indoor low heat emission 2.Use of environment-friendly refrigerant R134a or R22 3.Efficient stainless steel plate heat exchanger 4.Stainless steel water pump, PP water tank; the water circulation system does not contain metals such as copper, aluminum, and iron, so it will not rust at all 5.Filtration of cooling water, and fine filtration of chilled water, with the filtering accuracy at the user's option 6.Multiple alarm functions such as flow alarm, liquid level alarm, temperature alarm 7.Cooling tower fan, chilled water pump, and cooling water pump output control functions 8.Externally controlled start, chilled water flow, and cooling water flow input control functions 9.Casters available to facilitate movement of the chiller 10.Compact size, easy operation, high efficiency and energy saving, stable performance, quality guarantee Function introduction The HW015~HW035 Series Water-cooled Water Chiller provides thermostatic (±1.0 / ±2.5) cooling circulating water, with a cooling capacity of 1500W~3500W, satisfying long-term steady cooling requirement of the heat generating equipment with a heating value â?¤3500W. The chiller adopts water cooling condensing mode to realize heat dissipation, and the heat produced by the heat generating equipment will be discharged to the external environment through the cooling water, whereby it will not increase indoor heat. Scope of application Laser equipment/CNC machine/Injection molding machine/Induction heating equipment/High-power linear motor

As a leading water-cooled screw chiller manufacturer with almost 20 years of experience since 2003, TopChiller provides a complete range of water-cooled screw chiller from TPWS-WSH series. The cooling capacity of screw water chiller is from 30Ton to 480Ton/105KW to 1688KW and the chiller temperature control range from +30 to -30. Besides the standard water-cooled screw chiller control temperature from 7 to 30, TopChiller also has a water-cooled glycol screw chiller control temperature below zero from 0 to -30 for some special industrial applications. With 20 years experience in design and manufacturing water-cooled screw chiller from TopChiller has the following features: Using famous brand Semi-hermetic Screw Compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor comes with 4 steps of energy control 0-25%-50%-75%-100% to make sure the whole screw chiller operates when stable with high refrigeration performance. Each water-cooled screw chiller with high-efficiency shell and tube type heat exchanger and aluminum foil with a copper tube air cooled condenser.

Industrial water chiller Imported american and japanese new compressors featuring built-in security protection, low noise low electricity consumption, and long service life. Original schneider electric parts that guarantee stable operation and long service life. Imported original italian water pump with high output, efficiency and lasting service life. Imported precision digital display temperature controller in order to precisely control water temperature with variation of 1c. The temperature ranges from 5c +50c Full stainless steel thick water-tank-type evaporator is integrated with the built-in automatic water compensation device for quick and convenient and maintenance. The condenser of the water-cooling unit is bushing type, and the internal thread copper tube is inside the bushing, so it is of reasonable design and good heat exchange. The heat radiation cold row of the air-cooling unit is made of tilted slices and cavalcade copper tube. In production, the second edge tilting machine and advanced heat exchanger production line are used in order to guarantee quality and efficiency. Static plastic spraying enclosure with european design and elegant appearance. Fast removal and mounting method is used in the external panel for convenient operation and maintenance. Pcking with wood case

Product features 1.Heat dissipation mode of water cooling, realizing indoor low heat emission 2.Use of environment-friendly refrigerant R134a or R22 3.Efficient stainless steel plate heat exchanger 4.Stainless steel water pump, PP water tank; the water circulation system does not contain metals such as copper, aluminum, and iron, so it will not rust at all 5.Filtration of cooling water, and fine filtration of chilled water, with the filtering accuracy at the user's option 6.Multiple alarm functions such as flow alarm, liquid level alarm, temperature alarm 7.Cooling tower fan, chilled water pump, and cooling water pump output control functions 8.Externally controlled start, chilled water flow, and cooling water flow input control functions 9.Casters available to facilitate movement of the chiller 10.Compact size, easy operation, high efficiency and energy saving, stable performance, quality guarantee Function introduction The HW015~HW035 Series Water-cooled Water Chiller provides thermostatic (�1.0 / �2.5) cooling circulating water, with a cooling capacity of 1500W~3500W, satisfying long-term steady cooling requirement of the heat generating equipment with a heating value �3500W. The chiller adopts water cooling condensing mode to realize heat dissipation, and the heat produced by the heat generating equipment will be discharged to the external environment through the cooling water, whereby it will not increase indoor heat. Scope of application Laser equipment/CNC machine/Injection molding machine/Induction heating equipment/High-power linear motor

As a leading water-cooled screw chiller manufacturer with almost 20 years of experience since 2003, TopChiller provides a complete range of water-cooled screw chiller from TPWS-WSH series. The cooling capacity of screw water chiller is from 30Ton to 480Ton/105KW to 1688KW and the chiller temperature control range from +30 to -30. Besides the standard water-cooled screw chiller control temperature from 7 to 30, TopChiller also has a water-cooled glycol screw chiller control temperature below zero from 0 to -30 for some special industrial applications. With 20 years experience in design and manufacturing water-cooled screw chiller from TopChiller has the following features: Using famous brand Semi-hermetic Screw Compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor comes with 4 steps of energy control 0-25%-50%-75%-100% to make sure the whole screw chiller operates when stable with high refrigeration performance. Each water-cooled screw chiller with high-efficiency shell and tube type heat exchanger and aluminum foil with a copper tube air cooled condenser.

As a leading water-cooled screw chiller manufacturer with almost 20 years of experience since 2003, TopChiller provides a complete range of water-cooled screw chiller from TPWS-WSH series. The cooling capacity of screw water chiller is from 30Ton to 480Ton/105KW to 1688KW and the chiller temperature control range from +30 to -30. Besides the standard water-cooled screw chiller control temperature from 7 to 30, TopChiller also has a water-cooled glycol screw chiller control temperature below zero from 0 to -30 for some special industrial applications. With 20 years experience in design and manufacturing water-cooled screw chiller from TopChiller has the following features: Using famous brand Semi-hermetic Screw Compressor- Bitzer from Germany and Handbell from Taiwan. Each screw compressor comes with 4 steps of energy control 0-25%-50%-75%-100% to make sure the whole screw chiller operates when stable with high refrigeration performance. Each water-cooled screw chiller with high-efficiency shell and tube type heat exchanger and aluminum foil with a copper tube air cooled condenser.