Find Verified Water Based Adhesive Suppliers, Manufacturers and Wholesalers

Polyurethane Dispersion

Water based adhesive.

Water based adhesives Polivinyl acetate emulsion adhesives for wood, paper plastic substrates, seam glue, botton foil glue, polivinyl alcohol based adhesive, starches, pastes, bookbinding, all water based adhesives Ship products in drums of 55 gallons, or top bins of 2380 gallons, and pal of 5 gallons also

ParameterPacking adhesive YX-101A Solid content50%-60% PH4-6 AppearanceWhite milky liquid Product applicationG.D.X1, FOCKE 350 Suitable machine speed 400 Packets/minute Features: Our packing adhesive has good adhesion to difficult to adhere materials, and good rheological properties make it run smoothly and cleanly on the machine. Super Sticky relay, whether it is golden film or laser transfer packaging materials. Application: Excellent mechanical properties, suitable for all kinds of roll coating and spraying system. It is suitable for import and domestic cigarette packing machine. Certification: ROHS(EU)2015/683, EN14372:2004

Adhering of all types of wallpaper, Pvc folio, sealed jute and weaving glass, cover of textile wall paper. Glue is ready to use not effected damp and when dried making transperent elastic film. 10/15 kg.Pe bucket.

Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.

Dual functions Fast drying 2 in 1 -adhesive sealant Faster and higher green strength than solvent based construction high strength formed after 5 hrs. Water-based construction adhesive is developed to serve as adhesive and sealant give good wet grab. The adhesive is tough but also flexible. Developed for both professional and home handy man using AFTEK own new technology. 1. Fast setting 2. Very Tough but flexible with good degree elasticity 3. High heat resistance better than solvent based adhesive 4. Plasticizer resistant 5. No Sagging No sliding on smooth surface, can use on ceiling 6. No Drooling, no wastage and no mess on floor to clean up 7. High wet grab good for sticking heavy tiles and not slippery. 8. Easy to extrude even on cold day. Features: * Almost odorless. * NO VOC safe to use indoor. * Exceptional fast bond development. * Creamy smooth easy to spread. * Highly thixotropic easy to use on wall and ceiling without dropping off. * Good gap filling properties-suitable for filling uneven surface or small crack due to high solid content. * Paintable when dry. Product Specification: Highest Solid by weightâ?? 82% -83% few if any can match it. * SG â?? 1.65 â?? low filler surface area more binder for better adhesion. * pH 6 â??7 â??Near neutral safe on substrates. * No caustic soda or ammonia safe to use at home. * 5 hours bond strength 2.0 kg force/cm2 * After 24 hrs Bond strength 22 kg force/ cm2 no other WB adhesives can match that. Clean Up Clean up tool as soon as possible with water before it set hard. For harden adhesive, scrap off as much as possible with a strong scraper. Use solvent such as mineral turp to soften the remaining adhesive. Shelf life â?? I year if kept at ambient temperature within 5â?°C - 35â?°C.

PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.

Name: water-based varnish (self-adhesive) Model: H-5803C Use: for in-line printing , wet to wet printing , self-adhesive , for noodles package . Description: H-5803C is a plus by a special acrylic polymer emulsion with functional additives varnish, It has strong adhesion for the paper after it was hot of the Ultrasonic heating. This varnish has excellent gloss, good gloss and color retention, dry fast, good printability. The wet-wet and wet-dry printing has good wetting leveling, strong anti-alcohol ,printing machine is easy to clean. Dedicated to the noodles package(such as Master), which need ultrasonic to glue Automatic .This varnish is used off-line coating, can also be used for inline coating. Appearance: milky white liquid, Solid content 40%, Viscosity (seconds): 18 ~ 20, (3 cup, 25 ), Gloss: 55 5 Notes: 1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity. 2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow . 3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m. 4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 . 5, Take 12 hours after polishing of the varnish in order to achieve optimal performance. 6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean. 7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive. Package: 25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

Water base adhesive for vacuum thermoforming is one component water base polyurethane adhesive. Best quality PUD is used and it is totally environmental protection, innocuity, safety and non-odor, etc. It has excellent performance on heat resistant, fast drying, strong initial viscous, endurance bonding strength, and atomization. Suitable for materials such as pvc with MDF, chipboard or wood board etc. in the vacuum thermoforming area. It is widely applied to waterbase vacuum thermoforming products, like vacuum thermoforming door, kitchen cabinet panel, sound box panel, computer desk etc. 20L/can, N.W.: 14KG, G.W.: 15KG.

Urea 46%, frozen chicken, frozen beef, sugar icumsa 45, soybean, yellow corn, maize, n.p.k for agriculture, npk, glue, lamination glue, based water glue, adhesive, bitumen.

Water-based adhesive with high coverage. It is suitable for liner fixing, window pasting and Flap Sealing of Mono cartons. Product Features Very high green strength Best for lamination and varnished carton Good heat resistance for hot filling applications High coverage High bond strength Product fit for Casing-in application Technical Specification Appearance: Visual Milky White Emulsion Viscosity (Poise) @30 C by Brookfield RVT at 20 RPM 25-40 Solids (%) @105 C for 90 minutes 55-59