Warp Hc06 1993 Suppliers and Manufacturers

Powerful lubricating cum penetrating agent with binding property for Linen and polyester yarns for direct warp and sectional warp. The primary purpose of the product is to increase the abrasion resistance of sized warp yarn. Wax and tallow base softeners and lubricants are hydrophobic in nature. Angelube-CE100 contains 100% hydrophilic heads. Its provides penetrating power and also cold water soluble. Its easy biodegradable and not affect the binding property of the size mix. When use tallow and wax in storage it wont spread out evenly in size mix. It causes formation of uneven film property in yarn. This is the main reason for the weaving efficiency fluctuation. Not like that Angelube-CE100 has fully emulsifying property and its act as excellent leveling agent. It provides even film property to whole size mix. It directly reduce warp breakages and improve productivity in fabric formation.

Eco-friendly low viscosity modified starch suitable for cotton, viscose, acrylic and blends with polyester and other warp yarn sizing. Its excellent penetrating & film forming property plays an important role in the protection of yarn, it gives highest weaving efficiency on all types of shuttle less loom .

A unique copolymer warp yarn sizing agent for Cotton, Rayon, Modal Polyester and Blends of Polyester/Cotton/Viscose Spun yarns. Heavy fabric constructions are easier to weave at low size add-on using SizeMagik-LP4. Low add-on also permits greater protection on high speed looms expensive reeds and sensitive mechanical parts life. Better film properties of the product provide the lower warp breaks and it improve the finished products quality. Reduced dropping level in sizing and weaving it provide more comfortable working conditions and reduce maintenance cost.

THINTEXOTM-Modified Starch Low viscosity modified starch for warp yarn sizing SPECIFICATIONS Appearance : off white to cream colour fine free flowing powder Solubility : Insoluble in cold water pH value( 15 % aqu. soln) : 5 to 7 Viscosity of 15% soln : Max 60 cPs (Brookfield viscometer ( Spl.2 , rpm:100 @ 80oc) LVDV II+ pro) Moisture content (w/w) : Max 13% Ash content (w/w) : Max 0.5% Sieve Retention (60 Mesh) : Max 1% Bulk density (gm/ml) : 0.45 to 0.55 SPECIAL FEATURES : Constant viscosity. Optimum penetration & film formation. Better flexible film . Easily de sizable product . Warp- break reducer. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY - Stable for one year from the date of manufacture PACKING - Available in 50Kgs Net weight PP Bags with a moisture-proof line inside.

SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.

Materials: carbon steel and stainless steel (302,304,304L,316,316L etc). Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters. Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone . We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .

Warping scarf Acrylic material Classic style

Jute Hessian Cloth Single warp & weft, plain weave, finer quality jute fabric manufactured in varying weights and widths â?? up to 500 g/m 2 are commonly known as Hessian. Its another name is Burlap. Application: Hessian fabric is lighter than sacking fabric. It is used for packing or wrapping goods such as Cotton, Wool or Tobacco. in construction firms as a protector. as Squares, Sheets, Liners, Tubing, Blankets, Camouflage, Wrappers, Wall Coverings, Shopping Bags, Upholstery and Home Furniture etc. Width : from 30 inches (about 76 cms) up to 72 inches (about 183 cms) Weight : from 7 ounces/40â?³ (about 198 grams/m2) up to 14 ounces (about 397 grms/m2) Packing: In pressed and iron bound bales, or on rolls (lengths upon demand). .des{padding-top: 5px;padding-bottom: 2px;}

Jute sacking cloth Sacking Cloth Width: 22 to 30 inches Weight: 11 to 24 ozs Weaving: Plain and Twill Colour: Natural Packing: 500/100 yds in iron bound bale Sacking Cloth Sizes: As per requirement Weight: Standard or light Sewing: Overhead Dry and Overhead Tar (safety Sewing optional) Colour: Natural Branding: Up to three colours Packing: 200-500 bags flat/folded in iron bound bale Standard Sacking Bags Twill Bag: A Twill Bag: 44x 26.5, 2.62 lbs; B Twill Bag: 44x 26.5, 2.25 lbs L Twill Bag: 44x26.5, 2.50 lbs; Corn Sack: 41x23, 1.75-2.15 lbs; Binola Bag: 44x 2.65, 2.00 lbs; Cement Bag: 29x20, 1.25 lbs; Coffee Bag: 40x26, 2.00 lbs; Grain Sack: 60x30, 3.25 lbs; Sugar Twill: 48x28, 2.00 lbs; Double Warp Bag: Heavycees (40x28, 2.25lbs); lightcees (40x28, 2.00lbs); D.W. Flour Bag: 58x28, 2.25lbs D.W. Salt Bag: 45x26.5, 1.75lbs D.W. Nitrate Bag: 35x26, 1.25lbs

Product Description EN 590:1993 . The first EU diesel fuel specification. It established a sulfur limit of 0.2% and a cetane number of 49 in onroad and nonroad diesel fuels. Sometimes referred to as Euro 1 diesel fuel. EN 590:1996 This standard reflected a new sulfur limit of 500 ppm. Price of product ( USD price or FOB price) : USD 250 - 260 per MT Product origin : Russian Key Specifications/Special Features : International Standard Minimum Order Size and Packaging details : 25000 MT

Material used 100% cotton and Polyester with available GSM 130 to140. Can do customized weight as per the customer requirements with different colour combinations. The mesh bag compliances with organic GOTS certification also available in 100% cotton. The application of this mesh bags are: Shopping, Fruits packing and other consumable packing or carrying purpose,

Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.

During Hindalco's copper production process, by-products such as sulphuric acid and copper slag are formed. Sulphuric acid is partly converted into phosphoric acid, which is then made to react with ammonia to make di-ammonium phosphate (DAP) fertiliser. During the process of making phosphoric acid, phosphogypsum and hydrofluosilicic acid (HFA) are formed. HFA is partly utilised to make aluminium fluoride, and rest is sold in the market. Sulphuric acid Hindalco produces sulphuric acid of IS 266/1993 technical grade. The sulphuric acid plants use the double contact double absorption (DCDA) process, and are designed by Monsanto Envirochem (USA). Phosphoric acid Hindalco's phosphoric acid plant is based on the Prayon Mark IV dihydrate technology provided by SNC Lavalin (Belgium). Phosphogypsum Phosphogypsum is a by-product of Hindalco's phosphoric acid plant. Copper slag (iron silicate) Copper slag is produced during the smelting process at Hindalco's copper smelter located at Dahej. Aluminium fluoride Hindalco produces aluminium fluoride by reacting HFA (a by-product of the phosphoric acid plant) with aluminium hydroxide (from Hindalco's aluminium manufacturing facilities).