Type ZJ and ZJLR pumps are vertical,centrifugal slurry pumps submerged in sumps to work.They are designed for delivering abrasive,large particle and high slurries.These pumps have no need of any shaft seal and sealing water.they can also be operated normally for insufficiend suction duties. Wet parts of Type ZJL pump are made of abrasion-resistant metal. All parts of type ZJLR pump immersed in liquid are lined with rubber our liners.They are suited to transport non-edge angle abrasive slurry. Different size wooden case
This pump is design in vertical type seal less Glandless pump with m
Vertical pump SEP series Motor Model:SEP-Vertical pump Materical:PP Power:5hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:2"X1.5" Max.capacity:466l/min Max.head:20.5m Weight:31.0kg
Vertical pump SEP series Motor Model:SEP-Vertical pump Materical:PP Power:2hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:2"X1.5" Max.capacity:350l/min Max.head:14.0m Weight:21.0kg
Vertical pump SEB series Motor Model:SEB-Vertical pump Materical:PP Power:2hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:2"X3" Max.capacity:350l/min Max.head:13.8m Weight:30.0kg
Vertical pump SEB series Motor Model:SEB-Vertical pump Materical:PP Power:15hp Pole:2P Rubber:EPDM Frequency:50HZ Caliber:4"X4" Max.capacity:1750l/min Max.head:29.0m Weight:118.0kg
Name: Vertical Pump (VSX Series) Structure Type & The Application Conditions : API standard, VS1, VS2, VS3 structure, single-stage, two or more stages, cantilever, long axis of liquid formula, diversion shell type, the class type pump is mainly used in petrochemical, iron and steel metallurgy, electric power, water conservancy , paper and sewage irrigation areas, typically a power plant circulating water pump. Specification: Maximum Capacity Q: 30000/h Maximum Head: 200m Pressure: 4.0MPa Highest Obtainable Temperature: +90
Tobee 200SV-SP Vertical Pumps and spare parts: Pump casing SP20092A05, Pump impeller SP20206A05, Pump F.P.L. Insert SP20041A05, Seal parts: SP15116-1, SV025, SP20204, F8124, etc. Tobee�® 200SV-SP Vertical Slurry Pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.
Vertical Submersible Pumps with extended shaft directly goes into sump or tank mainly used for solvents with motor above the ground and the whole pumps below mounting plate inside the tank. Available in Metallic as well as Non-Metallic MOC.
Product Description The TS/TSR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pump can offer. The heavy duty cantilever design makes the TS/TSR pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available. · TS pump - hard metal construction · TSR pump - rubber covered construction Structure: Fully Cantilevered – Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require. Impellers – Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings. Large Particle – Large particle impellers are also available and enable passing unusually large solids. Bearing Assembly – The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft. Casing – The metal pumps have a heavy walled abrasive resistant 27% chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures. Column and Discharge Pipe – The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered. Upper Strainers – Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. Lower Strainers – Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles. Specification 300T-TS Vertical Pump Capacity (Q) : 288-1267m³/h Head (H) : 6-33m Power (KW) : 200KW Speed(N) : 350-700r Effiency : 50 Impeller Dia.: 610mm Impeller No.: 5 Outlet Dia.: 300mm Weight: 3940kg Slurry Pump Spares Pumps spare and parts material : High chrome alloy:A33, A05, A07, A49, etc. vertical slurry pump Natural rubber: R08, R26, R33, R55, etc. Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, and so on. Applications Mining Coal washery Power plant Metallurgy Petrochemical Building material Dredging Other industrial departments, etc. This series of pumps are preferred by many customers with special installation requirements and widely applied in pool. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration.
Introduction: As the sump pump, series lm(r)s pumps are of single casing and made of wear-resistant metal and natural rubber. The wear parts are made of high chromium for series lms and are rubber lined for series lrs. According to liquid level of the slurry pool, the vertical slurry pump transmission shaft and suction pipe could be chosen for different length. This sump pump could operate under the best condition with different speeds. Application: The vertical slurry pumps are designed to transport the abrasive, large particle and high-density slurries and applied over the fields such as metallurgy, mining, chemistry, coal washery, power plant, building materials and environmental protection.
Type vs and vsr pumps are vertical, centrifugal slurry pumps submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type vs pump are made of abrasion-resistant metal. All parts of type vsr pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry. The type with¡°l¡±is a sump pump of extension shaft series, which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
Technological parameters: Flow rate: 10~ 2000 l/h. Pressure: 0~1.0 mpa. Adjustment mode: manual, electric, pneumatic, frequency conversation. Measuring accuracy: 1%. Motor power: 380v / 0.75kw (or 1.5kw) / 50hz (for your reference only) Fluid temperature: -45~450 Allowed particle size: 0.01 mm Viscosity of fluid: 0.3~800 cst Head of pump: 1 Diaphragm: 1 Material: Worm wheel: tin bronze Worm: 40cr or 38crmoal Diaphragm: ptfe Pump head: pvc, cs, ss, ptfe, etc. Inlet & outlet part: pvc, cs, ss, ptfe, etc. Bearing: nsk japan, skf sweden Oil seal: nok japan Advantage: 1. Simple structure and beautiful appearance. 2. Vertical installation of motor avoid the leakage of lubrication oil and prevent the environmental pollution. 3. Patented integrated sleeve adjustable eccentric transmission mechanism. 4. High drive efficiency. 5. Strong carrying capacity with accurate flow rate. 6. The flow rate is adjustable with capability of 0-100% free adjustment. 7. Stable and reliable operation with low noise. 8. Convenient maintenance and long life service. Certificate: Dnv iso9001:2000 Iso14001-2004 Ohsas18001 Ce Api Application: Our products are widely applied to petroleum, natural gas, chemical, power industry, environmental water treatment, nuclear industry, pharmaceutical, foodstuff, etc. We occupy an important market position in petroleum, natural gas, polycrystalline silicon, fluorine chemical, our market occupancy reaches more than 90% in chinese fluorine chemical industry. Strong wooden box with pallet
300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
Vertical Sump Pump or Long Shaft Pump. We manufactured vertical pumps for the applications with low net positive suction head, cryogenic temperatures where vertical lift is required and in also in sump and cooling water services. Our vertical pumps is specially designed for service in water, chemicals, sewage and slurries. Vertical pumps are cover a wide range of hydraulic condition to meet virtually every pumping service in the industry and optimum efficiency.
Flow: 15m3/h Head: 80m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Overview Carry clean water or the liquids which is similar to clean water, supply water for industry and city,pressure booster for water supply for high building,fire protection,long distance transportation,carry circulation cooling for air condition carry the liquids which is similar to water in manufacturing process are,also use with the fire fighting or life pressure booster system. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply),our company can provide technical instruction on the change of the outer diameter of the impeller The type NLG pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 8-1400m3/h Head: 5-135 m Inlet outlet diameter: 50-350mm Product advantages High-efficiency energy saving: all pumps are used domestic advanced computer hydraulic model software and optimized design, performance advantage is obvious,the efficiency is 2-3% higher than similar products to save more energy,and wide high efficiency area Equipment reliability:Absolute concentricity of pump shaft and excellent static and dynamic equilibrium of impeller,ensure the pump running at high speed with low vibration,low noise Convenient installation, maintenance:Pump shaft and motor shaft are rigidly connected, easy separating and maintaining between motor and pump, the pump can be installed in any position and direction of the pipeline,simply open the pump cover for repair Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance Special design : As required, the flow channel can be used the US high temperature enamel technology to improve efficiency and durability
Overview Carry clean water or the liquids which is similar to clean water, supply water for industry and city,pressure booster for water supply for high building,fire protection,long distance transportation,carry circulation cooling for air condition carry the liquids which is similar to water in manufacturing process are,also use with the fire fighting or life pressure booster system. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply),our company can provide technical instruction on the change of the outer diameter of the impeller The type NLG pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance Capacity: 8-1400m3/h Head: 5-135 m Inlet outlet diameter: 50-350mm Product advantages High-efficiency energy saving: all pumps are used domestic advanced computer hydraulic model software and optimized design, performance advantage is obvious,the efficiency is 2-3% higher than similar products to save more energy,and wide high efficiency area Equipment reliability:Absolute concentricity of pump shaft and excellent static and dynamic equilibrium of impeller,ensure the pump running at high speed with low vibration,low noise Convenient installation, maintenance:Pump shaft and motor shaft are rigidly connected, easy separating and maintaining between motor and pump, the pump can be installed in any position and direction of the pipeline,simply open the pump cover for repair Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance Special design : As required, the flow channel can be used the US high temperature enamel technology to improve efficiency and durability
Section ix code qualified welders for Api applications Fabrications designed in accordance with ped (pressure equipment directive) and national standards when required Wide range of hydraulic designs To suit all applications Choice of bearings and mechanical seals pump mounted thrust bearing when required tank or sump mount options available Operating limits Capacity to 25, 000 , head to 1, 500 m Pressure to 15mpa Applications Condensate Power plants municipal hydrocarbons Pipeline Refineries Molten salt applications Characteristics Double suction first stage available Stage impeller Over 700 vertical ruhrpumpen pump hydraulics can be used for construction Integral fabricated column support bearings collet or ring and key impeller mounting One-piece shaft construction for shaft Lengths to 6 m (20 ft) Rigid 4-piece coupling Single or double suction first stage Single stage or multistage available Nozzles are available with the suction In the head or barrel Design features Api 610 latest edition construction available (vs6 type) Fabrications manufactured using asme
100RV-SPR Rubber Vertical Slurry Pump Parts including No.: SPR10206AR55, SPR10092R55, SPR10041R55, etc. Metal Model: 40PV-SP, 65QV-SP, 100RV-SP, 150SV-SP, 200SV-SP, 250TV-SP, 300TV-SP Submerged depth: E 900mm, G 1200mm, J 1500mm, L 1800m, M 2000m, Q 2400mm Wet End parts: Pump Impeller: SP40206A05, SP65206A05, SP10206A05, SP15206A05, SP20206A05, SP25206A05, SP30206A05 Pump Casing: SP40092A05, SP65092A05, SP10092A05, SP15092A05, SP20092A05, SP25092A05, SP30092A05 Pump Back Liner: SP40041A05, SP65041A05, SP10041A05, SP15041A05, SP20041A05, SP25041A05, SP30041A05 Rubber Model: 40PV-SPR, 65QV-SPR, 100RV-SPR, 150SV-SPR, 200SV-SPR, 250TV-SPR, 300TV-SPR Wet End parts: Pump Impeller: SPR40206, SPR65206,SPR10206, SPR15206, SPR20206, SPR25206, SPR30206 Pump Casing: SPR40092, SPR65092, SPR10092, SPR15092, SPR20092, SPR25092, SPR30092 Pump Back Liner: SPR40041, SPR65041, SPR10041, SPR15041, SPR20041, SPR25041, SPR30041 Impeller O-ring: RV064-S10, Discharge Pipe Gasket: SP10204, Rubber Back Liner Seal: E4124S01 RV004-1 100RV-SP Rubber Lined Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.
