Product Description: Flow tube is mainly used in vacuum infusion and prepreg process, feeding channel for resin. Resin infusion hose : It is made of PE and used to provide a very freeâ??lowing channel through which the resin is distributed near the point where the resin is first fed into the composite. Spiral hose : Resin flows freely through the center of the spiral tube, but just as easily out of the spirals in the side, allowing resin to be supplied all the way along an edge of the composite. 1.The best way to select a tube is to first decide which materials are chemically suitable, and then choose the one which best meets the physical demands of the application. 2.For maximum tube life, use a large bore tube at low speed. For maximum flow rate use the largest tube at maximum speed. For maximum accuracy, use a small bore tube at maximum speed. 3.Suction lift depends on the tube restituting fully before the advance of the next roller. If it does not, the flow rate will be reduced. For maximum suction lift or pressure, use the smallest practicable bore size of tubing and run the pump at the slowest possible speed. Product Specifications: FT12: PE, ID10mm*OD12mm, 80 Celsius, 200m/rolls; FT12: PP, ID10mm*OD12mm, 120 Celsius, 200m/rolls; FT16: PE, ID13mm*OD16mm, 80 Celsius, 200m/rolls; FT16: PP, ID13mm*OD16mm, 120 Celsius, 200m/rolls; FT20: PE, ID17mm*OD20mm, 80 Celsius, 200m/rolls; FT20: PP, ID17mm*OD20mm, 120 Celsius, 200m/rolls; Product Features: *Low material cost. *PE material, strong tube wall makes the spiral tube not deformed under atmospheric pressure. Packaging Information: The fabric is wound on a paper tube, then packing by plastic film, warp by Bubble film ,Place the pallet horizontally or pack it in a carton and then pallet it. The pallet and the goods are packed with packing tape, and then wrapped around the stretch film. Storage Method: Stored in a cool and dry place, and make sure not directly touch the ground or wall to avoid moisture. Do not remove the original packaging when store. Scenes To Be Used: Vacuum processing for industry
I.V. Fluid Infusion Set with Flow Regulator Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: Tube length-200cm Description Designed to control flow rates from 5 ml/hr. â?? 250 ml/hr. manually. Sharp, spike for easy insertion. Roller clamp for regulating fluid flow rate. Self-sealing latex bulb for drug administration. Disposable, sterile and non-pyrogenic.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Guar Gum Types Food, Feed & Pharma Grades - Various particle sizes (very coarse to very fine). - • Various hydration rates (very slow to very fast). - • Various viscosities (1% solution in water = 50 cps to 7000 cps). - • Special deodourised grades. - • Special low microbiological count grades. Technical Grades Straight Guars: - Various particle sizes (very coarse to very fine). - Various hydration rates (very slow to very fast). - Various viscosities (1% solution in water = 50 cps to 8000 cps). - Special good Dry-Flow (Free-Flow) Guars. - Special Anti-Dusted Guars. Modified Guars and Guar Derivatives: - Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing), - Borated. - Reticulated. - Oxidised. - Depolymerised. - High water absorbance capacity. - Carboxymethyl (Anionic). - Hydroxypropyl (Nonionic). - Hydroxypropyltrimethyl chloride (Cationic). - Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative). - Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives. - Special Anti-Dusted Modified Guars / Guar Derivatives. Guar gum is a fiber from the seed of the guar plant. Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis). In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent. In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams. How does it work? Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines. There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite. USES: Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days. High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides. Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes. Constipation. Irritable bowel syndrome (IBS).
I.V. Infusion Set Vented/Non-Vented (with Y Connector & Luer Lock) Product Code: MED 163 Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: 21 G vein Needle, Tube Latex, 2.7 x 1500 mm pvc tube Description Is sharp and easy to puncture. Connector fixes to each type of spike and connector. The IV infusion set for roller clamp is superior control of the flow rate. The end of set can be optional to Luer lock or slip. Molded Drip Chamber. Disc Filter in the drip chamber. Flow rate = 20 drops/ml Disposable infusion set for Standard sterilized package. Available in Both Tube Latex as well as Bulb Latex. Option Available : Needle Free Y Site and Needle Free Connector
I.V. Infusion Set Vented Product Code: MED 162 Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: 21G vein needle, Bulb Latex, 2.7 x 1500 mm pvc tube Description In-built Air vent Molded Drip Chamber Extra soft-Kink resistant tube Molded Latex Bulb for Extra Medication 6% Taper Luer as per international standards. Accurate flow control. Disc Filter in the drip chamber. Flow rate = 20drops/ml Available in Both Tube Latex as well as Bulb Latex. Option of Luer Lock and Luer Slip needle available
1. lighting products: * indoor luminaires (including led bulb, led tube, led panel, led slim panel, led batten, led ceiling, led cross and linear light, led high bay, led parking, led downlight, led track light); * outdoor luminaires (including led flood light, led solar flood light, led street light, led solar street light.) * led grow lights (a variety of professional grow lights for dragon fruit, chrysanthemum, medicinal plants, ginseng, tomatoes, strawberries, grapes, watermelons, cantaloupe, bell peppers, orchids, vegetables, algae, etc.); * fishing lights (including on boat lights and underwater lights); 2. kitchenware products: vacuum flask, water bottle, electric kettle; electric blender, rice cooker, glass liner and accessories..Manufacturing, export and import, transport, and odm/oem services for all of the products.
Canned Fruit Production Line, different capacity ,can customized. Process flowing :Raw materials cucumber cleaning brush cleaning lifting vibrating distributor Manual filling or Automatic machine filling (client choice) adding juice----Vacuum capping transportation sterilization drying labeling code spraying packaging warehousing (this process flowing only reference some machine are different).
Cucumber Canning Production Line, different capacity ,can customized. Process flowing :Raw materials cucumber cleaning brush cleaning lifting vibrating distributor Manual filling or Automatic machine filling (client choice) adding juice----Vacuum capping transportation sterilization drying labeling code spraying packaging warehousing (this process flowing only reference some machine are different).
Canned vegetable Production Line machine, different capacity ,can customized. Process flowing :Raw materials cucumber cleaning brush cleaning lifting vibrating distributor Manual filling or Automatic machine filling (client choice) adding juice----Vacuum capping transportation sterilization drying labeling code spraying packaging warehousing (this process flowing only reference some machine are different).
Capacity: 2L; Heat retention after 6h >= 78 C; Body: 304 stainless steel/ tinplate material, customized patterns and colors; Lid: Polypropylene material, integrated with stopper and LED temperature display; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: portable; Glass refill: high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 �°C; Body: Tinplate material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1.1L; Heat retention after 6h >= 78 �°C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, handle included; Bottom: PP Plastic material, skid resistance, easy to disassemble. Two removable food trays for keeping food separately; Mouth: Poured evenly, speed property, anti-overflow; Glass refill: Wide mouth, high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1.3L; Heat retention after 6h >= 78 �°C; Body: Stainless steel/Tinplate material, customized patterns and colors; Lid: PP Plastic/ABS/PC material, just press the button to get water, temperature display (optional); Bottom: PP Plastic/ABS material, skid resistance, easy to disassemble; Glass refill: Wide mouth, high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1.8L; Heat retention after 6h >= 78 �°C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, just loosen to get water without disassembling; Bottom: PP Plastic material, skid resistance, easy to disassemble; Glass refill: Wide mouth, high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 3.2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: Aluminum and cork material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 C; Body: Tinplate material, customized patterns and colors; Lid: Aluminum material; Stopper: Aluminum and cork material, easy to handle; Bottom: Aluminum material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted
Capacity: 2L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;