Serial RS232 RS485 RS422 Ethernet converter: USR-TCP232-306 is a multi serial port ethernet converter,which can realize bi-directional transparent transmission between RS232/RS485/RS422 and Ethernet. User can directly process data interaction through network and device to realize remote data acquisition, remote control and management. Features of Serial RS232 RS485 RS422 Ethernet converter Auto-MDI/MDIX, RJ45 port with 10/100Mbps Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client Baud rate of serial port can be configured from 600 bps to 230.4 Kbps, supports check bit of none, odd, even, mark and space Heartbeat package mechanism to ensure connection is reliable, put an end to dead link User-defined registration package mechanism, check connection status and use as custom packet header Supports RS232/RS485/RS422 port ( Canot be used at one time) Under TCP Server Mode, the connection number with client can be randomly set from 1 to 16, default number is 4. IP has been connected can be shown according to connectiong with calculating send / recceive dat. When connection number reaches a maximun, the new connection is kicked off the old one can be configured by user Parameters can be configured by built-in webpage, AT command, serial port procotol and network procotol. Setting procotol is avaliable to integrate into users software. Supports TCP client short connection function, user-defined the disconnected time. Device restart if no data transmission or timeout. User-defined the restart time. If data buffer needs to clear configuration before TCP connection establishment Supports DHCP, automatically obtain an IP address and query IP address via serial setting protocol. The global unique MAC address, user-defined MAC address DNS function DNS server addres can be defined Firmware can be upgraded by network Provide Virtual com software Restore factory setting through software or hardware Running across the gateway, switches or routers. Can work in LAN, also can work in the Internet Application Field of Serial RS232 RS485 RS422 Ethernet Converter Industrial data transmission, industrial automation security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
Introduction of RS232 to Ethernet Converters The RS232 to Ethernet Converters, used for data transparent transmission. USR-TCP232-302 is a low-cost serial device server,whose function is to realize bidirectional transparent transmission between RS232 and Ethernet. USR-TCP232-302 is internally integrated with TCP/IP protocol. User can apply it to device networking communication. Features of RS232 to Ethernet Converters Support DHCP, automatically obtain an IP address and query IP address through serial setting protocol Support DNS function Set parameters through webpage Upgrade firmware via network Auto-MDI/MDIX, RJ45 port with 10/100Mbps Serial port baud rate from 600 bps to 230.4 Kbps, Check bit of None, Odd, Even, Mark and Space Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client Support virtual serial port and provide corresponding software USR-VCOM Heartbeat package mechanism to ensure connection is reliable, put an end to dead link User-defined registration package mechanism, check connection status and use as custom packet header Under TCP Server mode, Client number ranges from 1 to 16; default number is 4 The global unique MAC address bought from IEEE, user can define MAC address Restore factory default Across the gateway, switches, routers Can work in LAN, also can work in the Internet (external network) Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS Support customization Application Field of RS232 to Ethernet Converters Industrial data transmission, industrial automation security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
USR-TCP232-419 is DTR/DSR Serial Ethernet converter, ethernet to serial converter with modbus RTU function Character for DTR/DSR Serial Ethernet Converter M4 Series Feature Industrial Solution TI Cortex M4 Solution, work temp at -40~85C Work Mode TCP Server/ TCP client/ UDP Server/UDP Client/ HTTPD Client Advanced Character -Modify MAC -Network Printing -Web Server: Web socket, Web to Serial Flow Control Software: XON/XOFF Serial Signal RS232: TX/RX, CTS/RTS, DTR/DSR RS485:A/B/G Serial Port RS232/RS485 Modbus Gateway Modbus TCP to Modbus RTU in bi-directional Modbus Polling Power Supply DC/Terminal type 5V~36V Protect Surge Protection, ESD 2KV, for more harsh industrial environment Built-in web page Customized web page is acceptable Certification CE/FCC/RoHs/WEEE Industrial data transmission, industrial automationDTR/DSR Serial Ethernet Converter Application Field security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring All USR products will be tested by R&D first, then production test again.(ESD Test,Surge/EFT Test, High/Low Temperature Test, EMC and LVD environment reliability test, etc.)
-10/100M self-adaptive Ethernet Interface -Support ATUO MDI/MDIX, allowing crossover cable connection or straight-through cable connection -Selectable Baud rate between 1299bps and 921.6Kbps -Build-in WEB server, allowing users to configure their webpage easily -Auto reconnection after a network break, ensure the reliable TCP connection for the whole network -Support DNS, can achieve a communication using the domain name -Compatible to SOCKET working modes (TCP Server, TCP Client, UDP and etc.), the upper layer machine software is written strictly following the SOCKET rules -TCP modes supports multi connections, specific data sending after password verifying, allowing up to 4 user to manage a single embedded device at a same time -Advanced security mechanisms, prevent illegal access from unauthorized visitors, provide IP verifying firewall, and up to 8 configurable IP or IP segment certifications -Support the local and remote upgrading of the firmware;Support AT Command configuration;Support remote configuration -16 bits ARM7 CPU; -Ethernet: 10/100Mbps -Protections: build-in 2KV surge protection -Type:RS232, RS485 -Control Signals :TXD,RXD,GND -Parity: None, Even, Odd -Data Bit: 5, 6, 7 or 8 bits -Stop Bit: 1 or 1.5 bits -Flow Control: Non -Baud Rate: 1200bps~921.6Kbps -Compatible Protocol: Ethernet, ARP, IP, UDP, TCP, BootP -Network Services: DHCP, DNS, PPPoE, TFTP, HTTP, UDP Broadcasting -Client/Server: Server -Ethernet Connector: RJ-45 -Ethernet Speed/Duplex: Auto-negotiation 10/100Mbps, Full/Half duplex -Auto-MDIX: Yes -WOL: Magic Packet, Wakeup Frame, Link-Up events -Software Tool: VSP Driver, DS Manager, Web Server -Configuration Mode: Web browser configuration tool, Windows Hyper Terminal, Telnet, Serial port configuration -Power Input: 3.3V DC -Physical Size (Wí-Dí-H): 77.5í-41.7í-22.7(mm)
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 50KW Rated energy: 75KWH
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 100KW Rated energy: 150KWH
USR-N520 is a double serial ethernet converter, which can realize transparent transmission between TCP/UDP data package and RS232/RS485/RS422 interface. User can easily realize embedded device networking. ndustrial Solution TI Cortex M4 Solution, -40~85C Web Server Web socket/ Web to Serial Modbus Gateway Modbus RTU to Modbus TCP / Modbus Pollinig Flow Control CTS/RTS, XON/XOFF Protection Watchdog circuit, never cash ESD 8KV Anti-surge Network Network Printing 2 network links, each serial support sending data to two servers Features of 2 ports RS232 RS485 RS422 Ethernet Converter Cortex-M4 kernel,industrial working temperature range and TCPIP protocol stack. Auto-MDI/MDIX,RJ45 port with 10/100Mbps TCP Server,TCP Client,UDP Client,UDP Server and HTTPD Client work mode Support network printing Support Modbus multi-host polling Two ports can work independently at the same time Support Modbus RTU to Modbus TCP Can distinguish which serial port connects to the device via port number Support virtual serial port and provide corresponding software USR-VCOM Serial baud rate from 600bps to 230.4K bps;Check bit of None,Odd,Even,Mark and Space DNS and DHCP supported Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS Built-in webpage;also can customize webpage for users Reload button,one key to restore default settings RJ45 with Link/Data indicator light,built-in isolation transformer and 2 KV electromagnetic isolation The global unique MAC address bought from IEEE (begin with D8-B0-4C);user can define MAC address Support upgrade firmware via network Support keepalive,rapidly detect dead links Support account and password,can be used to page login and network settings Support one channel Websocket,realize bidirectional transparent transmission between webpage and serial 0 Two serial ports;each serial can work as rs232,rs485 or rs422;DB9 female;provide rs485/rs422 converter Two channel serial communication indicator: TX/RX Support DC adapter and 5.08-2 terminal power supply Support UDP broadcast function Simple Transparent transmission of RS232 RS485 RS422 Ethernet Converter Transparent transmission means that whatever is transferred, our device plays the role of a channel and sends data to the target without modification. On-site monitoring equipment sends data to Serial Device Servers transparent data transmission terminal by itself port, the terminal CUP receives data by serial port and package data. Various parameter setting method of RS232 RS485 RS422 Ethernet Converter Software Settings Download settings software, search related Serial Device Servers in the LAN through the serial port server IP, name, MAC address, or the version number. Then set the parameters you need, otherwise keep the default
USR-N540, 4 serial port Ethernet converter which can realize transparent transmission between TCP/UDP data package and RS232/RS485/RS422 interface. Industrial Solution TI Cortex M4 Solution, -40~85C Web Server Web socket/ Web to Serial Modbus Gateway Modbus RTU to Modbus TCP / Modbus Pollinig Flow Control CTS/RTS, XON/XOFF Protection Watchdog circuit, never cash ESD 8KV Anti-surge Network Network Printing 2 network links, each serial support sending data to two servers Feature of 4 ports Serial Ethernet Converter TI Cortex-M4 kernel,industrial working temperature range and TCPIP protocol stack. Auto-MDI/MDIX,RJ45 port with 10/100Mbps TCP Server,TCP Client,UDP Client,UDP Server and HTTPD Client work mode 4 ports can work independently at the same time Can distinguish which serial port connects to the device via port number Support virtual serial port and provide corresponding software USR-VCOM Serial baud rate from 600bps to 230.4K bps DNS and DHCP supported Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS Built-in webpage;also can customize webpage for users The global unique MAC address bought from IEEE (begin with D8-B0-4C);user can define MAC address Support upgrade firmware via network Support keepalive,rapidly detect dead links Support account and password,can be used to page login and network settings Support one channel Websocket,realize bidirectional transparent transmission between webpage and serial 0 Support Modbus RTU to Modbus TCP Support UDP broadcast function Each serial can work as rs232,rs485 or rs422; Default port is RS232 BD9 male port Four channel serial communication indicator: TX/RX, CTS/RTS, XON/XOFF Support DC adapter and 5.08-2 terminal power supply Reload button,one key to restore default settings RJ45 with Link/Data indicator light,built-in isolation transformer and 2 KV electromagnetic isolation Application Field of 4 ports Serial Device Servers Industrial data transmission, industrial automation security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
Serial ethernet converter USR-N510, which can realize bidirectional transparent transmission between RS232/RS485/RS422 and Ethernet. Through simple settings via webpage or setup software can assign working details, realize serial data and TCP/IP data package transparent transmission by serial ethernet converter. USR-N510 is based on ARM processor and it is internally integrated with TCP/IP protocol. User can easily realize embedded device networking. Application Field For [Serial Ethernet Converter] Industrial data transmission, industrial automation security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring Character Industrial Solution TI Cortex M4 Solution, work temp at -40~85C Power Supply DC/Terminal type 5V~36V Serial Port RS232/RS485/RS422, 3-in-1 serial port Serial Signal RS232: TX/RX, CTS/RTS RS485:A/B/G Flow Control Software: XON/XOFF Modbus Gateway Modbus TCP to Modbus RTU in bi-directional Modbus Polling Advanced Character -Network Printing -Web socket: Serial to Webpage -Modify MAC -Hardware watchdog -ARP of server domain name Certification CE/FCC/RoHs/WEEE Work Mode TCP Server/ TCP client/ UDP Server/UDP Client/ HTTPD Client Built-in web page Customized web page is acceptable Protect Surge Protection, ESD 2KV, for more harsh industrial environment Point 1 Ethernet 10/100Mbps, support Auto-MDI/MDIX A port can correspond to 2 Sockets Provide PC TCP/IP socket programming examples such as VB, Andriod, IOS etc. Point 2 Virtual serial port, provide corresponding software USR-VCOM Baud rate: 600bpgs~230.4Kbps Reload button to restore default settings Support keep alive, rapidly detect dead links.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 150KW Rated energy: 225KWH
Diversified interfaces including SFP+ TO SFP+, SFP+ TO XFP, XFP TO XFP, Supports 3r (re-generation, re-timing, re-shaping) Fiber mode converter between fiber to fiber 10gbps equipment, or fiber repeater for long distance transmission 1310nm /1550nm/cwdm/dwdm optical wavelength conversion. Oeo for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Transmission rate:9.95gbps-11.35gbps Support hot plugging . Standard package
10gbps fiber to copper media converter for long distance transmission Network management function web snmp console Support dmi function for sfp+ fiber module Support itut prescribed dwdm/cwdm wavelength Media converter for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Sfp+ fiber module detection, utp cable length detection Support hot plugging Type: rj45 to/from sfp+. Standard package per customer
Technical paramter 1. Accord with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1q 100Base-T, 100Base-TX, 100Base-FX standard. 2. Support TCP/IP PPPOE DHCP ICMP NAT protocol 3. Flow control mode: Full duplex adopt IEEE802.3X, half duplex adopt Backpressure's standard. 4. Electricity port support auto-negotiation function, autoregulation transmit mode and transmit speed. 5. Prot supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode 7. Support electricity port's 10M 100M mode or self-adapt mode's switch. 8. Afford of state indicator, external power(output 5V-50Hz 1A) 9. Interface: Electric port RJ-45 fiber port: SC 10. Twisted-pair: CAT. 5 CAT. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125uM 12. Working temperature: 0~50degree 13. Storage temperature: -20~70degree 14. Humidity: 5% ~ 90%(noncondensing) 15. Size: 26*70*94mm(H*W*L) Specification Connect type: SC Fiber type: Singlemode Wavelengh: 1310/1550nm Typical distance: 20KM Min TX PWR: -18.0dBm Max TX PWR: -8.0dbm Sensitivity:
Media converter Parameter Specifications Access mode 10/100mbps Standard Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree Wavelength 850nm/1310nm/1550nm Transmission distance Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m Port One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm) Conversion mode Medium conversion, storing and forwarding Mac address table I k Buffer space 1mbit Flow control Full duplex state: flow control; half duplex state: back pressure mode Delay 9.6us Bit error rate
What is Solar OFF-GRID system ? It works by generating electricity from solar panels and using it to charge a solar battery via a charger controller. That electricity is then converted using an inverter so that it can power the home or business appliances. By saving the electricity in a solar battery, it is possible to run home with solar energy, even at night or during times when there is less sun exposure. Description : We do SITC ( Supply , Installation , Testing , Commissioning ) of Solar Off-grid / Solar Hydrid systems from capacities ranging from 1 K.watt to 300 K.watt for all applications like Industrial , Commercial and Residential. We do deal with both Ground Mounted and Roof Mounted system installations. We design battery storage capacities after proper analysis of average load , load factor , maximum instantaneous power drawn , Depth of Discharge (DOD) , State of Charge ( SOC) , Thermal properties of battery and also provide proper ventilation for gases produced from batteries . We carry out Solar system installations all across India ( from Jammu Kashmir to Tamil Nadu and from Gujarat to Assam ) . Till time we extensively worked in states like Rajasthan , Maharashtra , Gujarat , Odisha , Uttar Pradesh , Madhya Pradesh , Karnataka , Tamil Nadu , Andhra Pradesh. Proper requirement analysis (energy consumption analysis) will be done and accordingly system will be designed by using proper design tools also considering proper load bearing and wind bearing capacities w.r.t. co-ordinates. Installation , Commissioning will be carried out by trained and certified team in professional way and within stipulated time. Safer installation will be done by providing proper protection systems , by proper cabling through conduits and also by providing proper earthing and lightning arresters . Round the clock service support is available & free quarterly service visits will also be provided. IOT ( Internet of Things) enabled Inverters will be provided and complete generation data can be viewed at your fingertips in mobile application . Even troubleshooting can be done over the air ( OTA) . We use only quality material of Tier 1 brands / Globally renowned brands only and offer our best solutions at all times . Facility of AMC for Solar plants is also available. Warranty of individual components : Solar panels will be coming with 15 years of warranty and upto 25 years of performance guarantee, which states percentage efficiency of generation would be greater than 90 % at the end of 15th year and will be greater than 80% at the end of 25th year Inverters comes with a standard warranty of 2-5 years depending on capacity of inverters. Same can also be extended upto 10 years. Solar Deep Cycle batteries come with a complete warranty (without any prorate calculations) ranging from 36 months to 60 months depending on the capacity of the battery
What is Solar OFF-GRID system ? It works by generating electricity from solar panels and using it to charge a solar battery via a charger controller. That electricity is then converted using an inverter so that it can power the home or business appliances. By saving the electricity in a solar battery, it is possible to run home with solar energy, even at night or during times when there is less sun exposure. Description : We do SITC ( Supply , Installation , Testing , Commissioning ) of Solar Off-grid / Solar Hydrid systems from capacities ranging from 1 K.watt to 300 K.watt for all applications like Industrial , Commercial and Residential. We do deal with both Ground Mounted and Roof Mounted system installations. We design battery storage capacities after proper analysis of average load , load factor , maximum instantaneous power drawn , Depth of Discharge (DOD) , State of Charge ( SOC) , Thermal properties of battery and also provide proper ventilation for gases produced from batteries . We carry out Solar system installations all across India ( from Jammu Kashmir to Tamil Nadu and from Gujarat to Assam ) . Till time we extensively worked in states like Rajasthan , Maharashtra , Gujarat , Odisha , Uttar Pradesh , Madhya Pradesh , Karnataka , Tamil Nadu , Andhra Pradesh. Proper requirement analysis (energy consumption analysis) will be done and accordingly system will be designed by using proper design tools also considering proper load bearing and wind bearing capacities w.r.t. co-ordinates. Installation , Commissioning will be carried out by trained and certified team in professional way and within stipulated time. Safer installation will be done by providing proper protection systems , by proper cabling through conduits and also by providing proper earthing and lightning arresters . Round the clock service support is available & free quarterly service visits will also be provided. IOT ( Internet of Things) enabled Inverters will be provided and complete generation data can be viewed at your fingertips in mobile application . Even troubleshooting can be done over the air ( OTA) . We use only quality material of Tier 1 brands / Globally renowned brands only and offer our best solutions at all times . Facility of AMC for Solar plants is also available. Warranty of individual components : Solar panels will be coming with 15 years of warranty and upto 25 years of performance guarantee, which states percentage efficiency of generation would be greater than 90 % at the end of 15th year and will be greater than 80% at the end of 25th year Inverters comes with a standard warranty of 2-5 years depending on capacity of inverters. Same can also be extended upto 10 years. Solar Deep Cycle batteries come with a complete warranty (without any prorate calculations) ranging from 36 months to 60 months depending on the capacity of the battery
Media Converter, 10/100M 1310nm SM 5km Fiber optic media converter Skype:wirenettehnology Features : Surporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets. Surporting : The transmission of extra-long packes over VLAN Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single mode and single fiber single mode, to satisty the extended requirements of users. Technical specifications Parameter Specifications Access mode 10/100Mbps Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree Wavelength 850nm/1310nm/1550nm Transmission distance Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pair: 100m Port One RJ45 connector, connected to STP/UTP category-5 twisted pair One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125¦m) Single mode - SC/FC fiber port (fiber size: 9/125¦m) Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125¦m) Conversion mode Medium conversion, storing and forwarding MAC address table I K Buffer space 1Mbit Flow control Full duplex state: flow control; half duplex state: back pressure mode Delay 9.6us Bit error rate
Serial to ethernet converter (rs232/rs485).
V-rebplus is a 10/100m, self-adaptive, high performance, self-learning, remote ethernet bridge. Its low cost make it suitable for cost-sensitive bridging application or as a lan extender or subsection. When it is used as a extender or subsection, it can forbid filtrating to let all of the amount of traffic are transmitted in wan. Its 10 base-t interface can run in full duplex ethernet with topology and improve data throughput by eliminating the padding bit in 64 bytes frame. Variable speed up to 10mbps on the wan line is supported transparently. The line rate may be adjusted in running without any influence to v-rebplus. V-reb plus does not perform any negotiation over the link, which is specially suitable for satellites and other wireless broadcast applications. Features: *10/100m high fast powered self-adapting self-educated long-range ethernet bridge. * lan according with: ieee802.3/ieee802.3u/ethernet interface: utp(rj45) * wan interface: v.24/rs232 & v.35 optional * wan line speed rate reaches up to 10mbps. * speed of filtrating and transmitting is up to 30000 frame/ second. Buffer is 16m. * it can store up to10000 mac. And mac addresses have functions of automatically learning and updating. * ethernet utp interface has function of vlan802.1q. There have two transmitting mode to choose: data and image. * automatically learn mac addresses on the lan to which it is connected, and forward only those frames destined for another lan. Carton.
