Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
We Neptune One Trading and Petroleum Services, located in Dubai, U.A.E. We are an international trading company deals with import - export of different products. Our founders over the years have had experience in original commodities such as Ultra-low-sulfur diesel (ULSD) EN590 10PPM , UREA, MOP, DAP, Wheat, We are proud to present them at competitive prices on the market.
Minimum Quantity: 100,000 Metric Tons @ Trial lift Maximum Quantity: 400,000 Metric Tons @ Monthly Supply Price: Gross $370.00 USD/$350 .00 USD Net on FOB Price: Gross $390.00 USD/$380 .00 USD Net on CIF Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD
We sell Oil and Gas Products Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6
Min MOQ: 50,000 Metric Tons per Month Max MOQ: 500,000 Metric Tons per Month The quantity can also be exceeded upon request.
EN590 10ppm SPOT FOB Rotterdam price $515 per mt FOB Rotterdam price $630 per mt FOB DOHA: $498 per mt CIF ANY PORT: $533 per mt
ultra low sulfur diesel en590.
Available in Hamriyah - Sharjah, Diesel En590 PPM1000 QTY: 45,000 MT Price: $680/MT Requirements: SGS and MT103 Diesel En590 PPM1000 And Others PPM Ultra Low Sulphur are petroleum products derived from crude oil (petroleum) and processed in oil refineries. The diesel En590 PPM1000 or Grade D Gas Oil is red diesel that is distinguished by a 1000ppm sulphur content and red dye and is used in older machinery and boilers. The sulphur content comes from the element that's required for lubrication purposes pre-2011.
Ultra Low Sulfur Diesel En590.
Available in Hamriyah - Sharjah, Diesel En590 PPM5000 QTY: 60,000 MT Price: $680/MT Requirements: SGS and MT103 Diesel En590 PPM5000 And Others PPM Ultra Low Sulphur are petroleum products derived from crude oil (petroleum) and processed in oil refineries.
For latest pricing Enquiry., Please contact US with phone number and contact details
FOB Rotterdam minus 8 dollars from Platts FOB DOHA: 90$/bbl. CIF ANY PORT: 92$/bbl.
Ultra low sulfur diesel en590 10ppm.
Ultra low sulfur diesel en590 10ppm .
Quantity: Total Quantity of 300,000 MT of Diesel Gas-oil Ultra Low Sulphur (EN590) CIF/FOB Loading Port: Port of Yanbu, Saudi Arabia
Ultra low sulfur diesel (en590), aviation kerosene colonial (grade a1) jet fuel, aviation kerosene colonial (grade 54) jet fuel, liquified natural gas (lng), liquified petroleum gas (lpg).
Specification International export Standard Trial Shipment 50,000 MT (+/- 5%) Monthly Quantity 100,000MT Total Quantity 1,250,000 MT Price $482 USD PER MT Payment MT103 Packing By Bulk Inspection SGS or Similar By Seller Delivery FOB Loading port Rotterdam & Houston port. Insurance 110% by Seller Performance Bond 2% PB in favor of Buyer F.O.B. FEE ON-BOARD FUJAIRAH, ROTTERDAM & HOUSTON PORT 1. The Buyer issues an official ICPO containing the Seller's procedure upon for seller verification alongside: (a) Company Profile, (b) Seller's procedure, (c) Full banking detail, (d) Buyer acceptance letter, (e) Company Registration Certificate, (f) International data passport Copy of Buyer's, (g) NCNDA/IMFPA (h) TSA (Tank Storage Agreement) as proof of Storage Tank Availability. 2. The Buyer issues an official ICPO containing the Seller's procedure with TSA and Company Certificate of Incorporation. 3. The Refinery verifies the Buyer's ICPO with Company profile and issues Commercial Invoice of the product in tanks at the Port, and also SGS application form to the Buyer and the Buyer�¢??s Tank Farm Company sign and return CI to the Seller with NCNDA/IMFPA signed by all buyer groups with commission structures and buyer Terminal Access code and Hub Number. 4. Seller issues the below PPOP documents to the Buyer's secured email for verification. SGS Report GPS Coordinate TSR (Tank Storage Receipt) IR (Injection Report) DTA (Dip Test Authorization Letter) ATSC (Authorization to Sell and Collect) ATV (Authorization to verify the product in the Seller's Tank) 5. Upon buyers receipt of the PPOP, Buyer inspects SGS agent or equivalent. 6.Seller issues the following final documents to all Intermediaries and the Buyer endorsed NCNDA/IMFPA. 7. Upon successful Dip Test in tanks, product will immediately be injected into Buyer�¢??s Tanks. The Buyer makes Payment for the product via MT103 in exchange for title. DIESEL FUEL SPECIFICATION EN590 (10PPM) USLD Detailed specs shall be provided upon request. NOTE: THE ICPO must be in buyer's letterhead with authorized signatory and stamp. It is mandatory that the document carries the buyer�¢??s bank and bank officer's contact information. The names and positions of the Company representative signing the ICPO must be clearly indicated. Otherwise, the document has no legal value; the documents must be fresh (recent date �¢?? the most 1-3 days old max.) The letterhead of the Company requesting the commodity must correspond to the Bank Account Holder on the banking information provided. Lastly, the ICPO must be addressed to the VIA Al Thani and must carry the seller's approved procedures as shown above. If your documents do not pass these verification points, please discuss them with your Buyers and get them corrected. This will save time in our process
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
