Metric size tungsten carbide burs are available upon customes request. SYNDENT tungsten carbide burrs produced with high quality types of carbide and modern CNC grinding machines. Our rotary burrs are brazed by the advanced welding equipment automatically. Silver brazing materials are imported from USA. Carbide burrs manufactured to your drawings to meet your demands of particular stock removal. We can make chemical and geometry analysis for your carbide burs material and make grinding test in our professional laboratory center. SYNDENT tungsten cutter can be coated with TiN, TiCN, TiALN and LTE. OEM of many famous huge companies in the world for our carbide cutter.
Tungsten Carbide Dental Burs Description Tungsten carbide dental burs are manufactured from a single piece of tungsten carbide (TC) or from a TC tip brazed onto a surgical steel stem. The range includes patterns designed to meet the needs of all surgery and laboratory applications. Tungsten Carbide Dental Burs Applications Tungsten carbide dental burs can be used to cut or polish a wide variety of materials encountered in dentistry. These include tooth material such as enamel, dentine and bone, dental materials such as amalgam, composite, glass-ionomer cements, polymer and ceramic veneers and precious and not-precious alloys. The bur pattern will be selected to cut a specific material in a specific application and the following table gives guidance on selection. Safety in Tungsten Carbide Dental Burs Use Eye protection must be worn to protect against ejected particles. Surgical mask must be worn to avoid inhalation of aerosol or dust generated. Inspect the bur for broken flutes before each use and discard defective burs. Ensure that the bur is fully seated and gripped in the handpiece collet. Maintain handpieces in good working order and correctly lubricated. Do not exceed the maximum speeds tabulated above. Move the bur continuously when in use to avoid localized heating. Clean and sterilize the burs in accordance with the directions below before first use an before each reuse. These instructions are applicable to the processing of tungsten carbide, diamond and steel dental rotary instruments before first use and each reuse. Dental rotary instruments are supplied mechanically clean but are not sterile. They should therefore be sterilized before first use. Steel burs are single use devices and the instructions therefore only apply to processing before first use. Used burs should be considered as contaminated and appropriate handling precautions should be taken during reprocessing. Gloves, eye protection and a mask should be worn. Other measures may be required if there are specific infection or cross-contamination risks from the patient. With the exception of steel burs, which are single use devices, reprocessing will have little effect on dental burs. The end of life is determined by wear and damage in use and the burs should be inspected for defects during the preliminary cleaning process. Unless there is specific infection or cross-contamination risks, there are no special requirements for containment. The burs can be transported wet or dry and should be protected from damage to the cutting edges. If transported wet there is an increased chance of staining or corrosion. Prolonged storage in disinfectant solutions may result in corrosion and should be avoided.
according to your drawings or samples.
1. Refer the carbide blanks , we adopt yg7, (7%cobalt) , this grade is kennametal gave us this grade , that's why we also supply the carbide blanks to kennametal , yg1 2. Anyway , until now , the all customers whatever in usa, canada , or japan, italy are satisfied with the quality of our burrs. 3. Our machines are five-axis cnc that much better than others' 3-axis cnc 4. Original material (tungsten) not recyclable powder 5. Adopt the lucas-milhaupt for braze , 35 crmo alloy steel for shanks. 6. Silver brazing£¬grade is bag24£¬welding temperature is 680-730¡æ 7. The best quality , the longest lifetime in china recently. Cartons or plastic case
Industry abrasive tungsten carbide rotary solid burr for metal surface grinding 1. Metric size tungsten carbide burs are available upon customers request. 2. SYNDENT tungsten carbide burrs produced with high quality types of carbide and modern CNC grinding machines. 3. Our rotary burrs are brazed by the advanced welding equipment automatically. Silver brazing materials are imported from USA. 4. Carbide burrs manufactured to your drawings to meet your demands of particular stock removal. 5. We can make chemical and geometry analysis for your carbide burs material and make grinding test in our professional laboratory center. 6. SYNDENT tungsten cutter can be coated with TiN, TiCN, TiALN and LTE.
We also call them dental silicon polisher or dental rubber polisher. Made with Japanese rubber , silicon and aluminum oxides Silicon rubber polisher designed to polish acrylic resin base plates, denture base
HP shank (ISO 104), diameter 2.35mm (3/32"), suitable to all low speed handpiece More than 50 types of nail carbide burs for choices, most popular shapes are included. They must satisfy all your applications of nail beauty and podiatry. Different kinds of cutter types range from super coarse cutters to coarse cutters, medium cutters, fine cutters and extra fine cutters. Special kits of nail treatment are OEM available by your special demands.
1. dental carbide bur: HP shank (ISO 104), diameter 2.35mm (3/32"), suitable to all low speed handpiece More than 180 types of dental carbide burs for choice, most popular shapes are included. They must satisfy all your applications of dental laboratory, jewellery and podiatry. Different kinds of cutter types range from super coarse cutters to coarse cutters, medium cutters, fine cutters and extra fine cutters. Special kits of dental tungsten carbide cutters are OEM available by dental technicians and other demands. 2. FG carbide burs FG carbide bur, shank (ISO 314), diameter 1.6mm, suitable to all high speed handpiece All dental bur is produced by Germany raw material and technology Laser welding All FG carbide burs are manufactured by CNC grinding machine automaticall 3. RA surgical carbide burs RA surgical carbide bur, shank (ISO 205), diameter 2.35mm (3/32") All dental bur is produced by Germany raw material and technology Laser welding All RA surgical carbide burs are manufactured by CNC grinding machine automatically.
Tungsten carbide burrs, dental burs, nail bits.
Tungsten carbide rotary burs.
Tungsten W catalyst. Based on Assay - with 14-15% W and 3,5-4,5% Ni - in barrels about 18-20 tons - fine granules, about 2cm in length - notification can be done if needed. - Origin EU, loading port EU Port
Commodity: Calcium carbide Molecular formula:CaC2 Molecule Weight: 64.10 H.S code:28491000 CAS: 75-20-7 UN NO.1402 HAZARD CLASS: 4.3 Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide. Appearance: Grey, black solid, purple when its purity is more than 90%. Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm Package: Net in 100kg or 50kg new iron drums with nitrogen. Specification: GB10665-2004 Specification Superfine Grade First Grade Second Grade Gas yield(L/kg)L/kg 305 295-305 285-295 PH3 content in acetylene (PH3%) 0.06 0.08 0.08 H2S content in acetylene (H2S%) 0.1 0.1 0.1 Loading weight in 1 x 20fcl:22.5mt
Our good quality tungsten carbide is used in drills, saws, die etc. We export our items worldwide as well as China mailand.
Specifications 1.Iso 9001:2008 2.100% virgin raw material 3.From zhuzhou city-tungsten carbide kingdom 4.Hip sintered 5.Having 8 patents In waterproof and shockproof carton
We are supplier of Tungsten Carbide Items in sintered and finished condition. We can supply with various wear part grades and shapes as per standard and non-standard specifications. Also Special items can manufactured based on customer's requirements. Our Products details: Tc Wire/tube/bar drawing pellets. Tc Heading Pellets for cold and hot forging. Tc Valve Seat, Orifice plugs etc. Tc Washers, Swirl Chambers etc. Tc Sugar Tips. Tc Bushes for jigs and gauges. Tc Roller and Pulleys Tc Burnishing rollers Tc Nozzles for Sand blasting. Tc Flats & other special wear parts. Tc Bowl, ring, cups, disc etc. Please send us your requirements with dimensional drawing or samples. A waiting for your reply.
What are details of tungsten carbide ring ? Name Tungsten Carbide,Tungsten Carbide Ring,Tungsten Features 1. High hardness and wear-resistance 2.Good anti-corrosion and heat-resisting 3.High strength and good toughness 4.The hardness and the wear-resistance will not change in 500°C.Even in 1000 °C it still has a high hardness. 5.It is a cemented carbid Representative products 1. Tungsten steel rod 2. Tungsten steel strip 3. Tungsten steel discs 4. Tungsten steel sheet Sizes According to your requirments Packing Normal packing or according t customer's requests. Price The price will change according to the weight of the steel you need. What is the tungsten steel grades? SONGSHUN CB CARBIDE KENNA KYORITSU FUJILLOY ROBLLOY CERATIZIT MG10 KG6 CD-50 TB6 G55 VA40 HC60 MG10.1 EA65 CDKR3150 TB7 G65 VA50 HC70 MG20 ST7 CD60 TB7 G70 VA60 HC80 MG60 VA95 CD70 G8 C95 VA70 HC50 MG80 WF25 CD18 KD10/KD20 F20 RD25 HC40 PD650 WF30 CD650/KR887 KD20 D40 RD30 HC30 PV20 WF40 CD650 KD20 D40 RD40 HC25 PV30 WF30/KG5 KR887 kD40 D50 RD50 HC20 VG1 KG1 CD630 G1 F20 VA30 HC10 VG2 KG2 CD30 G2 F10 VA35 HC20 VG3 KG3 CD35 G3 D30/D40 REA25 HC10 VG4 KG4 CD40 G4/G5 D40/D50 REA30 HC03 PG05 WF05 CD630 KD05 N10 DA10 SMX PG06 WF10 CD-KR885 KD10 F10 FD25 SMS PG07 WF20 CD635 KD05/KD10 D10 RD20 S3X7 PG08 WF15 CD-KR855 KD05/EF10 D20 KA20 S4X7 These are our main products, other tungsten steel can also produce.
HP shank (ISO 104), diameter 2.35mm (3/32"), suitable to all low speed handpiece More than 50 types of nail carbide burs for choices, most popular shapes are included. They must satisfy all your applications of nail beauty and podiatry. Different kinds of cutter types range from super coarse cutters to coarse cutters, medium cutters, fine cutters and extra fine cutters. Special kits of nail treatment are OEM available by your special demands.
We also call them prophylaxis brush. The last one calls prophy brush or prophy cups. Made with rubber, bristle, silicon, aluminum oxides, nylon, wool. RA shank, ISO 204 Designed to clean and polish natural teeth, amalgam and gold fillings. Specifically designed to remove plaque stains.
Customized Tungsten Carbide Nozzle TC Sand Blasting Nozzle ,tungsten carbide nozzle with wear-resistance fuction,high temperature resistance, wear resistance and corrosion resistance.It is mainly used for the oil pump valves such as sand wells, heavy oil wells, offshore oil wells and high-pressure sulfur-resistant oil wells in the petroleum industry