Tungsten Carbide Dental Burs Description
Tungsten carbide dental burs are manufactured from a single piece of tungsten carbide (TC) or from a TC tip brazed onto a surgical steel stem. The range includes patterns designed to meet the needs of all surgery and laboratory applications.
Tungsten Carbide Dental Burs Applications
Tungsten carbide dental burs can be used to cut or polish a wide variety of materials encountered in dentistry. These include tooth material such as enamel, dentine and bone, dental materials such as amalgam, composite, glass-ionomer cements, polymer and ceramic veneers and precious and not-precious alloys. The bur pattern will be selected to cut a specific material in a specific application and the following table gives guidance on selection.
Safety in Tungsten Carbide Dental Burs Use
Eye protection must be worn to protect against ejected particles.
Surgical mask must be worn to avoid inhalation of aerosol or dust generated.
Inspect the bur for broken flutes before each use and discard defective burs.
Ensure that the bur is fully seated and gripped in the handpiece collet.
Maintain handpieces in good working order and correctly lubricated.
Do not exceed the maximum speeds tabulated above.
Move the bur continuously when in use to avoid localized heating.
Clean and sterilize the burs in accordance with the directions below before first use an before each reuse.
These instructions are applicable to the processing of tungsten carbide, diamond and steel dental rotary instruments before first use and each reuse. Dental rotary instruments are supplied mechanically clean but are not sterile. They should therefore be sterilized before first use. Steel burs are single use devices and the instructions therefore only apply to processing before first use.
Used burs should be considered as contaminated and appropriate handling precautions should be taken during reprocessing. Gloves, eye protection and a mask should be worn. Other measures may be required if there are specific infection or cross-contamination risks from the patient.
With the exception of steel burs, which are single use devices, reprocessing will have little effect on dental burs. The end of life is determined by wear and damage in use and the burs should be inspected for defects during the preliminary cleaning process.
Unless there is specific infection or cross-contamination risks, there are no special requirements for containment. The burs can be transported wet or dry and should be protected from damage to the cutting edges. If transported wet there is an increased chance of staining or corrosion. Prolonged storage in disinfectant solutions may result in corrosion and should be avoided.
Max :3.5000rpm handpiece sde-h35l sp 4.0kg 20*15*12cm
Good quality and attractive price Five pcs in a package
1. Tooth position: U1/ U3/L6/U6 2. Ideal for opening of the pulp chamber; root canal filling. 3. PEN-031 while root canal; Pen-032 red root canal.
1.Replaceable simple root tooth for Endodontic. Tooth position : U1 / U4 / U6 / L6 2.With pulp chamber; root canal and crown. 3.Ideal for opening of the pulp chamber; root canal enlargement; root canal length measurement; root canal filling.
Thchnical parameters * wavelength: 980nm * laser power: 30w * working mode of laser: continuous/repeat pulse * pulse frequency: 1khz * available fibers with multi-core diameter: 200/400/600/800/1000microns * net weight: 9kg * gross weight: 20kg * measurement: 66.5¡¡§¡é38¡¡§¡é36mm Key features * perfect performance and reliability * unprecedented versatility and affordability * easy to operate * system with high security * various operation mode * shorter healing time Main clinic applications * pldd(percutaneous laser dsic decompression) * evlt(endovenous laser treament) * ent(ear, nose and throat) * lipolysis(laser fat burning) * general surgery Accessories Standard fittings: safety goggles/fiber stripper/opticals fibers of multiple specifications/ceramic scissors Options: hand pieces in variety of specifications 1pc/pack
Specifications dimensions: 20016160mm weight: 0.8kg (1.76 lbs) wavelength: 80810nm output power: 0.5~7.0w operation mode: cw or pulsed delivery system: 200m, 400m, 600m, 800m, 1000m fiber (optional) aiming beam: 3mw/635nm red diode power source: rechargeable battery and ac 110v~240v, 50hz (input voltage) Design full-color lcd touch screen for easy navigation super-capacity built-in information storage module visual impact, compact, highly integrated and modular design, lightweight, table-on, wall-mounted, hand-held Benefits minimal or no bleeding no swelling, faster healing reduced post-operative infection minimal or no anaesthesia minimal pain and inconvenience less time in chair, less anxiety high quality treatment less time predictable result General dentistry applications surgy normal: implant uncover / crown lengthening / vestibuloplasty / operculectomy / gingivoplasty surgy fibrous:gingivectomy / frenectomy / gingival troughing / papillectomies surgy coagul: coagulation surgy granul: abscess endo: canal sterilization / puip capping / meilting or glazing / pulpotomy perio: pocket / decontamination / peri-implantitis thera: biostimulation / herpes, aphthae / hypersensitive / temporomandibular jiont(tmj)therapy white: light activation for bleaching materials / laser assisted / whitening or bleaching of teeth 1 piece/ carton
Straight Osteotome, Tapered Straight Osteotome, Tapered • 5 diameters: 2.7, 3.2, 3.7, 4.2 and 5.0 mm • Each diameter is color-coded on the end of the osteotome. • Six depth markings from 7 to 20 mm. • Adjustable lock to set osteotome depth. • Osteotomes available individually or in sets of five per style. Straight Osteotome, Convex Rounded Straight Osteotome, Convex Rounded • 5 diameters: 2.7, 3.2, 3.7, 4.2 and 5.0 mm • Each diameter is color-coded on the end of the osteotome. • Six depth markings from 7 to 20 mm. • Adjustable lock to set osteotome depth. • Osteotomes available individually or in sets of five per style. Straight Osteotome, Concave Straight Osteotome, Concave • 5 diameters: 2.7, 3.2, 3.7, 4.2 and 5.0 mm • Each diameter is color-coded on the end of the osteotome. • Six depth markings from 7 to 20 mm. • Adjustable lock to set osteotome depth. • Osteotomes available individually or in sets of five per style. Offset Osteotome, Tapered Offset Osteotome, Tapered • 5 diameters: 2.7, 3.2, 3.7, 4.2 and 5.0 mm • Each diameter is color-coded on the end of the osteotome. • Six depth markings from 7 to 20 mm. • Adjustable lock to set osteotome depth. • Osteotomes available individually or in sets of five per style. Offset Osteotome, Convex Rounded Offset Osteotome, Convex Rounded • 5 diameters: 2.7, 3.2, 3.7, 4.2 and 5.0 mm • Each diameter is color-coded on the end of the osteotome. • Six depth markings from 7 to 20 mm. • Adjustable lock to set osteotome depth. • Osteotomes available individually or in sets of five per style. Offset Osteotome, Concave Offset Osteotome, Concave • 5 diameters: 2.7, 3.2, 3.7, 4.2 and 5.0 mm • Each diameter is color-coded on the end of the osteotome. • Six depth markings from 7 to 20 mm. • Adjustable lock to set osteotome depth. • Osteotomes available individually or in sets of five per style.
System Open system 98mm Size 98*10mm 98*12mm 98*14mm 98*16mm 98*18mm 98*20mm 98*22mm 98*24mm Color A1,A2,A3,A3.5,A4; B1,B2,B3,B4; C1,C2,C3,C4; D2,D3,D4; Pink;Clear;Bleach Vickers Hardness: 26,60HV Flexural strength:114Mpa E-Module: 2771Mpa Residual monomer
Dental wax has 3 systems. Open system 98mm It's suitable for Roland,Wieland,VHF,Imes-Icos etc. cad cam machine. Amann girrbach system95mm It's suitable for Amann girrbach cad cam machine. Zirkonzahn System95mm It's suitable for Zirkonzahn cad cam machine.
