Tris, or tris(hydroxymethyl)aminomethane, has been widely used as a pH buffer in biological media for about 35 years. The near-ideal properties of this biological buffer are the reason for its popularity. Tris does not absorb water, is easily soluble in water, and has high purity. It does not precipitate calcium salts, is stable in solution for several months at room temperature, and does not seem to inhibit many enzyme systems. However, due to the chemical and physical properties of Tris buffer, improper use may lead to erroneous pH measurement of the electrode system. The influence of pH in TRIS buffer on electrode Biochemists use TRIS buffers to control the pH within the physiological range (approximately 7 to 8 pH), because phosphate can cause adverse reactions with biological substances in the test sample. However, when pH measurements are to be made on these solutions, another type of "adverse side reaction" must be recognized, involving the pH electrode system. The influence of chemical and physical properties of Tris buffer on pH Tris, which is commonly used for physiological measurement (pH 7 to 7.5), does not have a large buffer capacity. Therefore, caution should be exercised when using tris buffer to control sample pH. The rather large temperature coefficient of tris (-0.028pH/ C) is also worth considering. For example, if the meter is calibrated with tris buffer and the tris temperature is 20 C, using a pH value of 25 C will cause errors. Therefore, temperature pH dependence must be used when using tris for standardization. When using tris to control the pH of the sample, the degree of control will depend on the sample temperature. If the sample temperature changes by 2 C, the pH control changes by about 0.06 pH units. The required pH control will determine the maximum allowable temperature fluctuations. Advantages of Tris buffer Because the Tris base is highly alkaline, this buffer system can be used to prepare buffers with a wide range of pH values from acidic to alkaline; It has little interference to the biochemical process, and does not precipitate with calcium, magnesium ions and heavy metal ions. Disadvantages of Tris buffer The pH value of the buffer is greatly affected by the concentration of the solution. The buffer is diluted ten times, and the pH change is greater than 0.1; the Tris buffer should be prepared from high-purity tris and HCl using distilled or deionized water without CO2. The temperature effect is large, and the temperature change has a great influence on the pH value of the buffer, so it must be prepared at the use temperature, and the Tris-HCl buffer prepared at room temperature cannot be used at 0 C to 4 C; It is easy to absorb CO2 in the air, so the prepared buffer should be tightly sealed; This buffer has a certain interference effect on some pH electrodes, so use an electrode compatible with Tris solution.
Applications: In Animal feed stuff Nutrition feed for Poultry, Layers, Cattle. Primarily used as a dairy cow feed supplement, the buffering capability of Natural Soda's pure and natural feed grade sodium bicarbonate helps stabilize rumen pH by reducing acidic conditions. Improves calcium absorption and eggshell quality of laying hens during peak production.
IoLine Tris Compatible pH Electrodes Iodine glass pH electrodes for the most demanding applications IoLine-TrisB IoLine Tris Compatible pH Electrodes Description The IoLine Tris compatible pH electrodes use a patented three chamber system with an iodine reservoir in the iodine/iodide reference electrode. The standard hydrogen electrode has proven too difficult in practical use to gain more than a mere theoretical importance. The Ag/AgCl reference system, which is the most common reference system, can cause measuring instabilities originating from potential variations with changing temperature or reactions between silver ions and the measuring solution in the area of the diaphragm. IoLine pH electrodes, in contrast, have the advantage of a much lower temperature sensitivity and a metal ion free reference system. IoLine-TrisB IoLine Tris Compatible pH Electrodes Features * Unique iodine/iodide reference system * Tris buffer compatible * Exchangeable bridge electrolyte * Integrated refill port * Excellent for a wide range of applications IoLine-TrisB IoLine Tris Compatible pH Electrodes Specifications * pH Range: 0 to 14 * Temperature Range: 23 to +212°F (-5 to +100°C) * Shaft: Glass * Zero Point: pH = 7.00 ±0.25 * Reference System: iodine/iodide * Type of Membrane Glass: A
* Gentle gel type cleanser with mildly acidic pH level - While refining the skin texture, the cleanser will help cleanse with no stripping. Great for all skin types, wake up to a firmer-looking skin while letting it rest clean during the night. 1. DETAILS - BENEFITS Hydrating cleanse without stripping Removes impurities Protects skin barrier Restores pH Balance - TARGETS Dry skin Dull & tried skin Uneven skin texture * Great for sensitive skin 2. INGREDIENTS - KEY INGREDIENTS 0.5% Betaine Salicylate (BHA) & 5,000ppm Tea Tree Oil : Soothe and strengthen for luminous and clear skin pH Balanced pH 5.31+1.00 : Optimize the balance of oil and water in the skin 3. HOW TO USE Use morning and night, after removing makeup. Begin with wet hands and face. Squeeze a proper amount onto your hand and foam up. Gently massage onto face avoiding the eye and mouth area. Rinse with warm water.
The graphite electrode comprises: (1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting. (2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China. (3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking. (4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
1. Chemical Name: Sodium Pyrophosphate 2. Formula: Na4P2O7, Na4P2O7, 10H2O 3. Molecular weight: 265.90, 446.06 4. Specificity: Colorless or white crystals, crystalline or granular powder. It is easily soluble in water, but is insoluble in alcohol. Density: 2.45, relative density: 2.45, melting point: 890? . The decahydrate effloresces slightly in dry air. pH of 1% solution is about 10. 5. Quality Standard: 6. Usage: It is mainly used as detergent, electroplating . ctFor food grade it is mainly used as emulsifier, buffer, nutrient, sequestrant, texturizer 7. Packing: 25kgs net paper or plastic woven bags. 8. Storage and Transport: It should be stored in a dry, ventilative and clean warehouse kept away from moisture and hot, Furthermore, it should be stored separately from poisonous Substances.
Main Information: Sodium Sesquicarbonate Molecular Formula: Na2CO3.NaHCO3.2H2O CAS Number: 533-96-0 EC Number: 205-580-9 Manufacturer: TATA Chemicals Europe Appearance: Granular Also Known As: Trisodium Hydrogendicarbonate Sesqui CREX Key Properties: Sodium Sesquicarbonate (Borax Substitute) is a unique alkaline product that is ideal for a wide range of household, personal care and industrial uses. Manufactured by Tata Chemicals Europe at its dedicated plant in the UK, Sodium Sesquicarbonate (Borax Substitute)is a free-flwing, non-irritant white powder. It is produced by the recrystallisation of Sodium Carbonate and Sodium Bicarbonate, to form a single crystal of Sodium Sesquicarbonate (Borax Substitute)Na2CO3.NaHCO3.2H2O. Sodium Sesquicarbonate (Borax Substitute)avoids pH surges seen with blends of Sodium Bicarbonate and Sodium Carbonate due to their different dissolution rates. The varied and valuable properties of Sodium Sesquicarbonate (Borax Substitute), such as water softening, high solubility, mild alkalinity, free flow and excellent buffering capacity, lead to uses in a wide range of applications.
Disodium Pyrophosphate,E541, CAS no.7758-16-9, is a popular leavening agent used in baking powders. available as WHITE POWDER. Disodium Pyrophosphate is widely used as food buffering and chelating agent in food processing. As an experienced Disodium Pyrophosphate manufacturer and supplier, we has been supplying and exporting Disodium Pyrophosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Disodium Pyrophosphate Specification ITEM STANDARD Na2H2P2O7 95.0% MIN APPEARANCE WHITE POWDER WATER INSOLUBLE 1.0% MAX ARSENIC( AS) 3PPM MAX LOSS ON DRYING 0.5% MAX CADMIUM (PPM) 1 MAX LEAD (PPM) 4 MAX MERCURY (PPM) 1 MAX HEAVY METAL( PB) 15PPM MAX FLUORID( PPM) 10 MAX PH VALUE 3.5-4.5
Tetrapotassium Pyrophosphate (TKPP) E450, CAS no.7320-34-5, white powder, a potassium salt of phosphoric acid manufactured from Dipotassium Phosphate. Tetrapotassium Pyrophosphate is used as buffering agent, emulsifier, dispersing agent and thickening agent in food production. As an experienced Tetrapotassium Pyrophosphate manufacturer and supplier, we has been supplying and exporting Tetrapotassium Pyrophosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Tetrapotassium Pyrophosphate Specification ITEM STANDARD ASSAY K4P2O7) 98.0% MIN APPEARANCE WHITE POWDER WATER SOLUBLE 0.2% MAX PH 9.9-10.7 ARSENIC( AS) 3PPM MAX LOSS ON IGNITION 2.0% MAX Pb (PPM) 5 MAX HEAVY METAL( PB) 15 PPM MAX ASRENIC(AS) 3 PPM MAX FLUORID( PPM) 10 MAX
Sodium Diacetate, E262,CAS no.126-96-5, Sodium Diacetate is a white crystalline powder with an acetic acid odor. Functions: Inhibits growth of micro-organisms; Aroma/flavour enhancing; pH control agent. As a buffering agent, sodium diacetate is used in meat products to control their acidity. As a food preservative, sodium diacetate used to inhibit the growth of various microorganisms in meat products, thus it can be used as a preservative and safeguard for food safety and shelf life extension. As an experienced Sodium Diacetate manufacturer and supplier, we has been supplying and exporting Sodium Diacetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Diacetate powder Specification Item Specification Appearance White, hygroscopic crystalline solid with an acetic odour Free Acetic Acid (%) 39.0- 41.0 Sodium Acetate (%) 58.0- 60.0 Moisture (Karl Fischer method, %) 2.0 Max pH (10% Solution) 4.5- 5.0 Formic acid, formates andother oxidizable (as formic acid) 1000 mg/ kg Particle Size Min 80% Pass 60 mesh Arsenic (As) 3 mg/ kg Lead (Pb) 5 mg/ kg Mercury (Hg) 1 mg/ kg Heavy Metal (as Pb) 0.001% Max
Monoammonium Phosphate, E342, CAS no.7722-76-1, also known as Ammonium dihydrogen phosphate, a salt of phosphoric acid manufactured through chemical synthesis, ammonia and phosphoric acid as raw materials. Properties: white crystalline powder, soluble in water. Monoammonium Phosphate (Food Grade) is used in food as a pH control agent, buffering agent, acidulate, and nutrient source. Also in bread and dough, dry powder beverages, eggs, isotonic beverages, mineral supplements, starter cultures and yeast cultures. As an experienced Monoammonium Phosphate manufacturer and supplier, we has been supplying and exporting Monoammonium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Monoammonium Phosphate Specification No. standard name industrial grade food grade 1 Main content(as NH4H2PO4)% 99.0 99.0 2 Phosphorus pent-oxide(as P2O5)% 61.0 61.0 3 Nitrogen(as N)% 11.8 11.8 4 PH value 4.4-4.8 4.4-4.8 5 Moisture% 0.2 0.2 6 Heavy metal(as Pb)% 0.001 7 Arsenic(As)% 0.0003 8 Fluoride(as F)% 0.005 9 Water insoluble % 0.10 0.10
TetraSodium Pyrophosphate, E450, CAS no.7722-88-5, white powder or granular, also called sodium pyrophosphate, tetrasodium phosphate or TSPP, manufacturing process from Disodium Phosphate. Tetrasodium pyrophosphate is used as a buffering agent, an emulsifier, a dispersing agent, and a thickening agent, and is often used as a food additive. TSPP is used to modify the proteins enabling them to retain moisture during storage, thawing, and cooking. As an experienced TetraSodium Pyrophosphate manufacturer and supplier, we has been supplying and exporting TetraSodium Pyrophosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. TetraSodium Pyrophosphate Specification ITEM STANDARD NaH2PO7 >95% PH at 1% 9.9-10.7 Loss of Ignition
Tricalcium Phosphate, E341, CAS no.7758-87-4, white powder, also known as TCP, a calcium salt of Phosphoric acid manufactured through chemical synthesis. Tricalcium Phosphate used as an anti-caking agent, nutritional supplement (calcium intensifier), pH regulator and buffer. Tricalcium Phosphate is often used in flour, additives in milk powder, candy, pudding, beverages, cheese, jam,condiments, and meat products. As an experienced Tricalcium Phosphate manufacturer and supplier, we has been supplying and exporting Tricalcium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Tricalcium Phosphate Specification ITEM STANDARD APPEARANCE WHITE POWDER CONTENT(CaH2PO4), % 34.0-40.0 HEAVY METALS(As Pb), % 0.003 FLUORID, % 0.005 LOSS ON DRYING, % 10.0 MAX As, % 0.0003 Pb, % 0.0002 TOTAL BACTERIAL COUNT CFU/G 500 MOLD CFU/G 50 E COLI PASS SALMONELLA PASS
Potassium Tripolyphosphate, E451, CAS no.13845-36-8, appears as a white powder, used as a sequestrant, buffering agent, an emulsifier, and a texturizer in processed meat, fish and cheese. It is also highly soluble in aqueous solutions and has excellent dispersion properties. Applications for Potassium Tripolyphosphate include in low sodium meats, processed seafood and cheeses, soups and sauces, noodle products and modified starches. As an experienced Potassium Tripolyphosphate manufacturer and supplier, we has been supplying and exporting Potassium Tripolyphosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Potassium Tripolyphosphate Specification ITEM STANDARD Appearance White powder Assay (%) 95.0 Water insolubel matter (%) 0.2 pH (1% Solution, 25) 9.2- 11.1 P2O5 (%) 47 Fluorid (F) 10 ppm Iron (Fe) 10ppm Arsenic (As) 3ppm Lead (Pb) 10ppm Mercury 1ppm Heavy Metal (as Pb) 15ppm
Monosodium Phosphate, E339, CAS no.7558-80-7, a sodium salt of Phosphoric Acid, colorless and odorless crystal. Monosodium Phosphate often used as a pH buffer, characteristic improving agent, emulsifier, nutritional supplement, anti-oxidant, brine penetrable agent, sugar clarifier, and stabilizer in bread and cheese. As an experienced Monosodium Phosphate manufacturer and supplier, we has been supplying and exporting Monosodium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Monosodium Phosphate Specification Product Name Monosodium Phosphate Anhydrous MSP Monosodium Phosphate MonohydrateMSP.H2O Monosodium Phosphate Dihydrate MSP.2H2O Appearance White Powder Crystal Particles Crystal Particles Monosodium Phosphate NaH2PO4 (on dried material) %(w/w) 98.0-103.0 98.0-103.0 98.0-103.0 Water Insoluble %(w/w) max 0.2 max 0.2 max 0.2 Arsenic (as) mg/kg max 3 max 3 max 3 Heavy Metal (as Pb) mg/kg max 10 max 10 max 10 Fluoride (as F) mg/kg max 50 max 50 max 50 PH (1% aqueous solution) 4.4+0.2 4.4+0.2 4.4+0.2 Loss on lgnition %(w/w) max 2.0 10.0-15.0 20.0-25.0
Disodium Phosphate Anhydrous, E339, CAS no. 7632-05-5, manufacturing process via chemcial synthesis, Phosphoric acid and Sodium hydroxide as raw materials. Disodium Phosphate Anhydrous is a white powder and granular substance that is basically odorless. It is used to adjust pH, emulsifier, improver, buffer, nutrient supplement, fermentation aid, binder, and chelating agent. As an experienced Disodium Phosphate Anhydrous manufacturer and supplier, we has been supplying and exporting Disodium Phosphate Anhydrous for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Disodium Phosphate Anhydrous Specification Product Name Disodium PhosphateDSP Disodium Phosphate Dihydrate DSP 2H2O Disodium Phosphate HeptahydrateDSP 7H2O Disodium Phosphate DodecahydrateDSP 12H2O Appearance White powder Crystal particles Crystal particles Crystal particles Disodium Phosphate Na2HPO4(on dried material) %(w/w) min 98.0 min 98.0 min 98.0 min 98.0 Water Insoluble %(w/w) max 0.2 max 0.2 max 0.2 max 0.2 Arsenic (As) mg/kg max 3 max 3 max 3 max 3 Heavy Metal (as Pb) mg/kg max 10 max 10 max 10 max 10 Fluoride (as F) mg/kg max 50 max 50 max 50 max 50 Loss on lgnition %(w/w) max 5.0 18.0-22.0 42.0-46.0 max 61.0
Inosine, CAS No.58-63-9, is a nucleoside manufactured through fermentation, available as white crystalline Powder. Inosine is widely used in nutraceutical, nutritional supplement, and food additive applications. Inosine is an amino acid that is a kind of coenzyme drug widely used in the medicine and the food industry. Inosine is also used as an important feed stimulant or combine with other amino acids in some species of farmed fish. As an experienced Inosine manufacturer and supplier, we has been supplying and exporting Inosine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Inosine powder Specification ITEM STANDARD Appearance White crystalline Powder Identification Positive in No.1, 2, 3 Test State of solution transmittance Clear and colorless ot less then 98% Loss on drying 1.0% Heavy metals(Pb) 10ppm Assay 98.0~102.0% Residue on ignition 0.2% Other Related compounds of nucleic acid Chromatographically not detectable Arsenic(As2O3) 1ppm PH 4.8-5.8
Potassium Benzoate, E212, CAS no.582-25-2, the potassium salt of Benzoic acid, a white, odorless, flaky, crystalline powder, soluble in water. Potassium Benzoate manufacturing process via chemical synthesis, toluene and potassium hydroxide as raw materials. It uses as food preservative that inhibits the growth of mold, yeast and some bacteria. It works best in low-pH products, such as PH 4.5. As an experienced Potassium Benzoate manufacturer and supplier, we has been supplying and exporting Potassium Benzoate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Potassium Benzoate powder food grade Specification Product Potassium Benzoate CAS 582-25-2 (anhydrous) INS 212 Structure Molecular formula C7H5KO2 3H2O Properties White particles, flakes or crystalline powder.Odorless, melting point 121.5 123.5 , soluble in water and ethanol. Quality Specification Standard Item JECFA97 FCC V USP35-NF30 Content(dry basis) 99% 99.0%~100.5% 99.0%~100.5% Alkalinity (as KOH) passed test 0.06% passed test Lead 2 mg/kg 2 mg/kg Water (105, 4h) 26.5% 1.5%. 1.5%. Heavy metals - - 0.001% Cl(as chlorine) 0.07%- Easy oxide test passed test Application 1.Used as food preservative and antimicrobial agent mainly for artificial butter,wine . 2.Used as a preservative, antimicrobial agent in food industry. 3.Analytical reagent. Can also be used as tweet agent of fireworks material. Dosage Refer to the amount of sodium benzoate. Packaging Net weight: 25kg,paper-plastic bag or woven bag lined with PE bag,can also be customized according to the customer's requirements of packaging. Storage Stored in cool, dry and ventilated place.Must not be loaded and transported with toxic, hazardous and polluting substances.
Sodium Propionate, E281, CAS no.137-40-6, a white crystalline solid or powder that is the sodium salt of propionic acid. Sodium Propionate manufacturing process via chemical synthesis of propionic acid and sodium carbonate or sodium hydroxide as raw materials. Sodium Propionate is used in the food and beverage industry as a preservative. It prevents the growth of mold and some bacteria, thereby prolonging the shelf life of packaged baked goods. Used as a mold inhibitor in bakery products, such as breads, yogurts, soups, drinking yogurts, canned vegetables, etc. As an experienced Sodium Propionate manufacturer and supplier, we has been supplying and exporting Sodium Propionate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Propionate powder Specification Product Sodium Propionate CAS 137-40-6 INS 281 Structure Molecular formula C3H5NaO2 Properties White crystals, particles or crystalline powder;Odorless or slightly ethyl butyrate smell.1g of this product can be dissolved in 1ml of water,25 or 24 ml of ethanol. Quality Specification Standard Item GB25549-2010 BP2012 FCCV USP35 EP7.0 Content dry basis 99.0%~100.5% 99.0%~101% 99.0%~100.5% 99.0%~100.5% 99.0%~101% Loss on drying (Vol. 4) 1.0% 0.5% 1.0% 1.0% 0.5% Water-insoluble matter Clear, olorless Clear, olorless PH 10 7.8~9.2 7.8~9.2 As(as As203) 3 mg/kg Heavy metals (as Pb) 4 mg/kg 10ppm 2 mg/kg 0.001% 10ppm Fe 0.003% 10ppm 0.003%10ppm Alkalinity (Na2CO3) passed test 0.15% passed test
Sorbitol liquid 70%, CAS no.50-70-4, also known as glucitol, manufacturing process from purified glucose as material via hydrogenation refining and concentration. It appears as a colorless liquid, used as a food sweetener. Uses: food-grade liquid sorbitol can also be used as a sweetener in home brewing, cheeses, processed fruit, dried vegetables, fat spreads, and baked goods. Sorbitol liquid is also used in modern cosmetics as a humectant and thickener. Sorbitol is also used in some toothpastes and mouthwashes. As an experienced Sorbitol liquid manufacturer and supplier, we has been supplying and exporting Sorbitol liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Sweeteners Qty in 20 FCL 25000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E420 CAS No. 50-70-4 HS Code 382460 Specification FCC/USP Sorbitol liquid 70% Technical grade Specification Item Specification Our control Appearance Transparent, sweety,viscidity qualified Dry solds,% 69.0-71.0 70.0 Sorbitol content(based on dry basis),% 70.0 70.0 Ph value 5.0-7.5 5.0-7.5 Specific Gravity (Relative density(d2020)) 1.285-1.315 1.285-1.315 Reducing Sugars(based on dry basis),% 0.21 0.15 Total Sugars(based on dry basis),% 8.0 8.0 Residue on ignition,% 0.10 0.10 Refraction Rate 1.4575-1.4620 1.4605 Conductivity Rate 10 s/cm 10 s/cm Heavy metal 5PPM 5PPM Lead(base on pb) 1PPM 0.5PPM As (base on As) 2PPM 1PPM Chlorid(base on Cl) 10PPM 10PPM Sulphate(base on SO4) 50PPM 20PPM Nickel(base on Ni) 2PPM 1PPM Total Aerobic Plate Count 1000cfu/ml ﹤100cfu/ml Yeast &Mold 100cfu/ml 100cfu/ml E-Coli Absent(cfu/g) confirms Salmonella Absent(cfu/25g) confirms assess qualified with the standard (It is a non-crystalline liquid)REMARKS: This product complies with the Standard (according to with the FAO/WHO standard 1988). Fit for human consumption.
