Transformer Oil is highly purified non-inhibited high performance mineral oil of Class 1 category of electrical insulation oils, confirming to IS 335:1993 It is use to insulate and cool transformer coil and to quench� electric� arcs� that� form between� contacts� of� switchgears,� circuit� breakers� and� rheostats� using� mineral insulating oil. BENEFITS High insulating capacity. Effective cooling and heat dissipation due to low viscosity. Minimum risk of fire due to very high flash point. High demtilsibility to ensure good separation of water in case of accidental pollution. No impurities e.g. water, dissolved gases suspended solids, etc.. Excellent oxidation stability. Minimum consumption of product due to low volatility at operating temperatures.
EQUINAS TFO 60i High Quality Inhibited Transformer Oil EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
Texol Transformer Oils are manufactured from carefully selected New Generation Right Base Oil with emphasis on product purity at every stage of refining. They pass through 3 stages of purification. They are manufactured to meet the following specifications: â?¢IEC 296 â?¢IEC 60296: 2021-02 Edition 4.0 Application: They have excellent cooling efficiency, long life, better insulation properties, reduced corrosive Sulphur and aromatic contents, can withstand extreme climatic conditions. PRIVATE LABELLING OF TRANSFORMER OIL IS PART OF OUR CORE BUSINESS
Product description This instrument absorbs the advanced technology of similar products at home and abroad, and can set up various parameters through the keyboard. This machine has a power down protection, over temperature protection, "0" C protection and gas protection, automatic electronic ignition, etc. it has the characteristics of stable and reliable performance, simple and reasonable structure, simple operation, high expansibility, etc. Technical index Temperature control: a. Chromatographic column chamber temperature a.1 Temperature control range: room temperature +8 400(Set the temperature increment 1) a.2 The precision of temperature control: It is±0.1, which is below 200;
for sale used filtered Transformer oil
Fuller's earth Transformer Oil Regeneration Plant Transformer Oil Regeneration Machineï¼?transformer oil Oil Regeneration Extends Transformer Unit Life HOPU's mobile regeneration system restores transformer oil by removing acidity, sludge, soluble oil decay products and improves oil colour with Fuller's earth treatment technology. When the treatment is complete, the regenerated oil meets or exceeds international standards for new oil with lower acidity and improved tan delta, interfacial tension, and oxidation stability. The cellulose insulation and internal components of the transformer also benefit from the flushing effect of multiple passes of hot regenerated oil, which helps remove decay products and sludge from internal surfaces. Advantages of Oil Regeneration · Extends the transformer life by restoring the qualities of the transformer oil to be similar to new oil condition · Oil Regeneration is much less costly than changing new oil · Minimal downtime as a result no revenue loss as Oil Regeneration can be performed â??on-inline or liveâ??/ energized transformer · Environmentally friendly as the existing oil is reused. There will also be no hazard from oil spills and PCB contamination, including the trouble with the disposal of old oil · Oil Regeneration removes the sludge build up and deposited on the internal core and coils of the transformer, which a traditional oil change will not · Oil Regeneration can be continuously performed in most weather conditions and will not run the risk of exposing the internal transformer core to adverse weather conditions during an oil change Introduction: ZYD-I Dielectric Transformer Oil Treatment Regeneration Machine is applied to process transformer oil and insulating oil from power plant, power station, electric power company, power transmission equipment, transformers, industrial and mining enterprises, especially suitable for on-site installation, maintenance and purifying high level new oil, or running oil from big power transmission and distribution equipment and transformers on national main power transformation grid, which is above 110-750KV. This special vacuum oil water separator can shorten the oil treatment period for transformer installation and maintenance.
Transformer Oil Filtration Machine PLC Fully Automatic Transformer Oil Purification Machine Transformer Oil Filtration Machine Vacuum Transformer Oil Filtration Plant 1. Famous brand PLC control, fully automatic operation, high precise filtering for insulating oil and transformer oil filtration. 2. Enhance the oil performace to protect the machine. 3. Low energy consumption. 4. Water content: 3ppm, impurity content: m, gas content: â0.1%. 5. Breakdown Voltage: 75KV Product Introduction This oil purification plant is applied to purify various of unqualified insulating oils including aging transformer oil, specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Features: 1. High vacuum: High point-Vacuum 5pa Working-vacuum 35pa 2. High absorption speed: Absorption speed power 333L/Sr. 3. Duplex 3D stereo-evaporation: eliminating the liquid water quickly. 4. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 5. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power. 6. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment. 7. Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV. 8. The oil of any grades can be treated on line at the working site.
Mobile Trailer Wheel Mounted Vacuum Transformer Oil Filtration Plant for Series ZYM Mobile Trailer Type Vacuum Transformer Oil Purifier Vacuum Transformer Oil Filtration Application: Series ZYM Mobile Trailer Wheel Mounted Vacuum Transformer Oil Filtration Plant is designed for purifying used or aged transformer oil, super high-voltage transformer oil, switch oil and other insulating oils. According to fieldwork requirement, this machine equips the car wheels, which can be easy to move to any work point by traction. It is special suitable for purifying the transformer oil which locate in different fields. This machine can recover the seriously transformer oil. The treated transformer oil can reuse again in transformer. With single-axle or double-axle or wheels, able to move from one location to another in order to recondition multiple tanks/batches Features: 1. Mobile (trailer) type, completely closed structure, waterproof, dustproof, move easy. 2. Installation of car tyres, Bridge shock absorber, braking system and steel welding of entire trailer guarantee 60km/h speed. 3. Dealing with unqualified insulating oils, rapidly remove water, gas, particles from oil 4. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 6. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
Enclosed Weather Proof Type High Vacuum Insulation Oil Filtration Unit ,Transformer Oil Purifier with carbon steel cabinet Enclosed Cabinet Type Transformer Oil Filtration Plant Vacuum Transformer Oil Recycle Plant,Oil Separation System, Insulating Oil Filter Machine with carbon steel Housing Cover Weather Proof Outside Use in Raining Enclosed Available -On line use -Functional -Convenient -Easy Move & Oil Fast Cleaning This oil purifier is a maintenance system for transformers and Transformer oil. ZYD transformer oil filter can keep transformers and transformer oil in a normal and good running condition. So that to save the new oil cost and transformers replacement cos Application: This oil purification plant is applied to filter various of unqualified insulation oils including aging transformer oil, insulation oil, specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Features: 1. Double-stage High Vacuum dehydration and degassing and removing impurities from the used transformer oil. 2. Eliminate acidity, sludge, free carbon, discoloration elements, and other soluble matters in the oil, which decays the transformer. 3. It can vacuum filling oil to transformers, and it can vacuum dry transformers and on-line operation with transformer. 4. The standard ZYD system is designed for purifying and filtering oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers). The oil technical data after treatment: 1. Gas content is less than 0.1% 2. Impurity size is less than 1m without free carbon 3. Water content is less than 3 part per million 3. Oil dielectric strength (breakdown voltage) is more than 75KV 4. Acidity value is less than 0.01 mg KOH/g 5. Dielectric loss factors at 90°C is less than 0.001
Why purify transformer oil? Maybe the first question should be, ¡°why is it important to have purified oil in a transformer?¡± Dissolved gasses in transformer oil can cause arcing, corona discharges, and overheating--reducing the electrical efficiency and lifetime of the transformer. Likewise, water contamination at levels as low as 30 ppm (parts per million) can adversely affect the insulating strength of the oil. With ever-increasing standards for energy efficiency of power distribution transformers, the need to effectively degas will become even more important in the future. particles contamination will also affect the function of insulating oil. So we need to clean used transformer oil. Features: 1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility. 2. Operational can be P.L.C (Programmable Logic Controller). 3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereo-evaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength. 4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly 5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control. 8. Specially applied to vacuum oiling and drying for power transmission equipments. 9. The oil of any grades can be treated either on- or off-load. 10. Special oil pump design with lower noise. 11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesn¡¯t pollute environment (it can be used to architecture and road pave) Comparing with the single-stage vacuum oil purifier, this machine can dewater, degas and removes the impurities more quickly, more completely, and makes the oil BDV (Breakdown Voltage) of 70kV or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices. (oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering ,oil filtration, oil filter, petroleum machine) Package Size:60cm x 25cm x 65cm (23.62in x 9.84in x 25.59in) Package Weight:40.0kg (88.185lb.) Unit Type:SET
1. Mobile (trailer) type, completely closed structure, waterproof, dustproof, move easy. 2. Installation of car tyres, bridge shock absorber, braking system and steel welding of entire trailer guarantee 60km/h speed. 3. Dealing with unqualified insulating oils, rapidly remove water, gas, particles from oil. Wooden case.
With double-stage vacuum system, two vacuum separating chambers and molecule adsorption technology, this double-stage vacuum transformer oil purifier can increase the purification effectiveness more than three times and efficiently and completely dewater, degas, remove particles to get higher dielectric strength and optimize performance of the oils. Features : 1.Adopting double-stage vacuum system to highly improve working vacuum value. 2.Two vacuum separating chambers with efficient oil atomizing device to increase separating size and separating time and ensure the drying degree and improve dielectric strength which is higher than 70 kv. 3.A suitable purifier for on-line oil purification of substations over 110 kv. 4.Deeply purifying high-grade transformer oil and ultrahigh voltage transformer oil. 5.Independent function of vacuum oil filling and drying. 6. Duplex stereo flash evaporation technology 7.Multi-stage precision purification system; mesh filtration combined with molecule adsorption technology. 8.Efficient heating system to make heating uniformity and decrease power consumption. 9.Double-infrared liquid level controller 10.Interlocked protective system to connect oil pump, heater and liquid level controller. If there has any fault, the purifier will be power off automatically.
This system with two stage vacuum purifies all insulation oil of power equipment rapidly and in more depth which removes water, gas and impurity in the oil rapidly and effectively with the support of high vacuum and absorption speed. Thus the strength of insulation oil is much increased and the time for oil treatment is shortened. Wooden case
Use: ZJA is widely used in electric power, transforming electricity industry, metallurgy, chemical engineering, traffic, railway and others. It is designed for the vacuum filter of expensive oil such as fresh oil, imported oil, instrument transformer oil, extra-high tension transformer oil (cover110v, major transformer), and for vacuum oiling, and drying of transformers. This filter can live line work on the spot. Feature: * Advanced dehydrating and degassing system that uses large area three-dimensional flash distillation technique to remove harmful composition in the oil such as water, air and gas. * It can be widely used for oil filling for transformers and circuit breakers under vacuum condition. * Precise filtration system, high-quality filter element, multi-stage filtration with gradual precision can help to remove mechanical impurities in the oil. * An advanced fully automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent equipment can ensure operation of the equipment with high performance. * Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation. * It is humanization design with low noise, deep purification and longtime free maintenance to save cost from the running process. * Purifiers are equipped with a chain safety protective system, an interlocking of oil drainage system, vacuum system and heating system, which avoids any possible negative impacts caused by mal-operation. Optional mode: * The customer's request can be met by adopting PLC intelligent and displaying dynamically. * The filtrated oil testing equipment can be collocated. * The whole set of this machine can be made mobile, immovable and car-carried. * All types of filter can be offered hermetical, canopy-covering or open-air. * Various sizes and configuration (alloy shield) are available. Wooden case.
With different flow rates from 500litre per hour to 300, 000litre per hour, for purifying oil's bdv. Wooden case
Mainly used to improve the properties of insulation oil. It can remove water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil filtration series is specialized in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil
Transformer oil purifier Application This plant is applied to regenerate and purify the used insulation oil such as transformer oil, switch oil, mutual inductor oil and so on. It can remove water, gas, particle, free carbon, deep oxides and so on. Also it can recover the oil color. After purification, the used insulating oil can reach international standard and recover its original function. Features: 1. Besides the common vacuum oil purifierí»s function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid- alkali water-solubility. 2. Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so dose the regeneration oil system, and also they can work at the same time. 3. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration. Advantages: It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, ph value. Meanwhile, it improves the voltage-withstand value through filtering the polarity materials like free carbon, deep oxides and so on. Wooden case
The Oil Filtration Plant shall be designed for high vacuum and low temperature of oil for achieving required results. The Oil Filtration Plant shall be Mobile, mounted on an under carriage with Four Pneumatic wheels. Automatic brakes and towing arrangement shall be provided. The Plant shall be weather proofed and shall be suitable for outdoor use. The casing shall be provided with doors of SS 304 Sheets, hinged on fabricated Framework, Angles and Channels to have access to the operational controls and inspection windows etc. The equipment shall be enclosed and protected against climatic conditions. The Screw Jacks for relieving pressure on wheels at stationary conditions shall be provided. All components shall have adequate strength and rigidity to withstand normal conditions of handling transport and usage and shall be free from edges or corners to avoid injury to Operating Personnel in normal conditions of use. The design of the Plant shall be such that if required the part/s can easily be replaced.
Our zyd series double-stage transformer oil purifier can quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil's dielectric strength, effectively making sure electric equipments working safely and normally. It is particularly suitable for treating high-grade transformer oil, super-voltage transformer oil and new transformer oil.It can be used for filtration of more than 110v substation live line work onsite.Meanwhile, series zyd oil purifier can be used as independent vacuum source with functions of vacuum drying and vacuum oiling. Advanced technology: 1.Double-stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value = 5pa. 2.Two vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly. 3.Duplex-stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 4.Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies. 5.Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 6.Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 7.Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak.If there is any fault, machine will be power off automatically. 8.Functions of live line work onsite, vacuum drying and vacuum oil filling.