Tile-in saranic drain model lined tdsm20 Tile-in Drain Model TD Material: 304 Stainless Steel Floor Slopped High Water Discharge P-Trap Poppet Junk Strainer Protective Layer to Stabilize Finishing 1 mm Steel Sheet for Top & 1.5 mm for Body Usable on 63 Pipes Pre-order Until 200 cm is Available
lined tile-in saranic drain middle outlet model tdasm 60 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket Material: Aluminum Floor Slopped High Water Discharge P-trap Poppet & Junk Strainer Protective Layer to Stabilize Finishing Size 60 cm 2 mm Aluminum Sheet for Top & 4 mm for Body
lined tile-in saranic drain middle outlet model tdasm 30 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket
lined tile-in saranic drain middle outlet model tdagm 60 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket
lined tile-in saranic drain middle outlet model tdagm 30 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket
lined tile-in saranic drain middle outlet model tda w60 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket
lined tile-in saranic drain middle outlet model tda w30 Material: Aluminum Floor Slopped High Water Discharge P-trap Poppet & Junk Strainer Protective Layer to Stabilize Finishing Size from 30 cm 2 mm Aluminum Sheet for Top & 4 mm for Body
Tile-in saranic drain model GM 401 This drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in different places. it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket
Tile-in saranic drain model sm 401 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in different places. it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket Material: Aluminum
Tile-in saranic drain model sm 301 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket Material: Aluminum Floor Slopptileed High Water Discharge Usable on 63 & 90 inch Pipes P-trap Poppet Junk Strainer Protective Layer to Stabilize Finishing 2 mm Aluminum Sheet for Top & 4 mm Aluminum for Body
Tile-in saranic drain model B 301 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket Material: Aluminum Floor Slopptileed High Water Discharge Usable on 63 & 90 inch Pipes P-trap Poppet Junk Strainer Protective Layer to Stabilize Finishing 2 mm Aluminum Sheet for Top & 4 mm Aluminum for Body
Tile-in saranic drain model w 301 This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket Material: Aluminum Floor Slopp tiled High Water Discharge Usable on 63 & 90 inch Pipes P-trap Poppet Junk Strainer Protective Layer to Stabilize Finishing 2 mm Aluminum Sheet for Top & 4 mm Aluminum for Body
This aluminum drain is a perfect set for bathrooms and kitchens. it is also usable in parking garages etc. this particular product can be used in two ways. one is simple and do not need anything. just put the face of drain up and it is done. another is usable by filling in with a piece of tile (which usually goes with the same as floor) it has protective layer against acid and chemical products. with insects' trap and p-trap and a basket
Fish skin contains collagen, a protein that is used in, for example, cosmetics to increase skin elasticity and strength. Collagen can also be turned into gelatine which is utilised in foodstuffs. Moreover, fish skin contains many minerals such as protein, unsaturated fatty acids, sulfur, choline, lecithin and calcium. Choline enhances memory. Lecithin has the effect of protecting the liver, promoting the nervous system and developing the brain. Unsaturated fatty acids are effective in the prevention and treatment of atherosclerosis, high cholesterol, high blood pressure and cardiovascular disease. Packing: 15-20 kgs/PPbag/Box Model Name: Sarah (+84347587878) Process: Collect the skin after fish fillet removing, clean with water and drain, sun -dried Impurities (bone,etc): < 1% Type of fish: Basa Fish/ Pangasius bocourti Color: Nature
We are importers and exporters of 1) recycle paper and tyre, paper product duplex, occ and ncc, ceramic tiles & sanitary wares, plastic recycle product ldpe. 2) industrial items : all kind of tarpaulin, pp corrugated sheets, ptfe lined pipes , fitting flanges , bar cutting and bending machineries, wood processing machineries, 3) oil & gas industries: all mech items pipes/ fittings // flangs and mech packages 4) soda ash, bicarb, free flowing edible and industrial salts etc 5) fmcg, atop, namkeens, foodstuff, pulses, grains, spices & besan, sarabati fresh chakki atta & maida. etc.Import export trading
We are supplier of frozen pork meat Frozen Pork Sparerib Specification: Skin-off, bone-in, with tender loin and ribs 4-6cm in width,fat tissue not exceeding 0.5cm. Packing:In cartons of 25kg net each. Frozen pork liver Specification: Without veins, fat and gall, fresh in quality and neat in appearance. Packing: 4 boxesX5kg to a carton. Frozen pork Heart Specification: Washed and drained, without veins and bloodstain, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork Kidney Specification: Fat and external membrance removed, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork spleen Specification: Fresh in quality, well-frozen and with a slight amount of fat left. Packing: 4 boxes(polybags)X5kg to a carton of 20kg. Frozen pork stomach(cooked) Specification: Fresh in quality, clean and neat,boiled and well-frozen. Packing: In carton of 20kg net each. Frozen pork trotter Specification: Fresh in quality and neat in appearance. Packing: In carton of 20kg net each. Frozen pork intestines Specification: Fresh, well-trimmed and washed, 80-150 cm in length each. Packing: In carton of 20kg, 5000gX4 boxes each. Frozen Pork Meat Specification: Without skin, fat and bones; each half carcass cut into the following four piecse: 1.Nape: Each piece weighing 0.8kg net min. 2.Shoulder: Each piece weighing 1.35kg net each min. 3.Loin: Each piece weighing 0.55kg net each min. 4.Leg: Each piece weighing 2.2kg net each min. With slight fat left on each piece of meat. In each carton, one piece of meat weighing less than the above stipulation is allowed. Packing:Packed separately in cartons weighing 25kg net each, lined with a polythene bag. Frozen Pork Sparerib Specification: Skin-off, bone-in, with tender loin and ribs 4-6cm in width,fat tissue not exceeding 0.5cm. Packing:In cartons of 25kg net each. Frozen pork liver Specification: Without veins, fat and gall, fresh in quality and neat in appearance. Packing: 4 boxesX5kg to a carton. Frozen pork Heart Specification: Washed and drained, without veins and bloodstain, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork Kidney Specification: Fat and external membrance removed, fresh in quality and neat in appearance. Packing: 4 boxes to a carton of 20kg. Frozen pork spleen Specification: Fresh in quality, well-frozen and with a slight amount of fat left. Packing: 4 boxes(polybags)X5kg to a carton of 20kg. Frozen pork stomach(cooked) Specification: Fresh in quality, clean and neat,boiled and well-frozen. Packing: In carton of 20kg net each. Frozen pork trotter Specification: Fresh in quality and neat in appearance. Packing: In carton of 20kg net each.
Hiko Ceramic India is a leading supplier of high-quality porcelain tiles. Porcelain tiles are one of the most versatile and preferred tiles, as they are durable, adaptable, and come in various colors, textures, and finishes. Product description:- Series Name:- LINE SHG Size:- 60x120cm | 24'x48' Surface:- Super High Glossy | Super Polished Thickness:- 9mm Water absorption:-
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
