Thin Rack Mount 10 4 Inch Industrial Lcd Monitor Suppliers and Manufacturers

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected   3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15   - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01

- 4-layer mask of TP Mask box of 50 pieces.Goods available for delivery always. - Usually ships in 7-10 days + Imported materials. + No chemicals, no skin irritation, safe for users + Pass the TCCS: 01: 2020 / CBTC-EUPHAR + ISO 9001: 2015 Preventing smoke, dust and bacteria from entering and preventing dangerous respiratory diseases. Use effectively when traveling on roads or working in hospitals, hazardous industrial environments. Air filter fabric is waterproof, breathable, does not cause skin allergies. The nose bar is easy to shape, helps to fix the mask and creates tightness to cover the face. Rugged strap, good stretch makes sense of comfort to use.

Shubhlaxmi industry is the manufacturer/processor and exporter of rich quality of Black Sesame Seeds. They are globally well known for its traditionally selected nutrient rich black sesame seeds. The botanical name of Black Sesame Seeds is Sesamum indicum and it belongs to family Pedaliaceae. They are spherical in shape and black in color. They are nutty in taste. Black Sesame seeds are having high amount of oils content in them. They are loaded with nutrients. They have higher level of anti oxidants comparatively. Black sesame seeds are mainly used in extracting oil which has many health benefits. They are used as sprinklers on vegetables, noodles or for garnishing starters. The powder of black sesame seeds has strong flavor and taste. Black sesame seeds can be roasted to be eaten as it is or its oil can be used to cure many diseases. Specification HS Code : 012074090 Purity Levels : 99/1 Sortex, Z Black Sortex Moisture : 4-6% Max Oil Content : 48% Min Admixture : 1%/0.03%/0.02% Ffa : 1-2% Max Color : Black Seeds Aflatoxin : (b1+b2+g1+g2) bellow 4ppb Salmonella : Absent/25gms Packing : 5/10/25/50 Kg Net Pp. & Brand Packing Quality Assurance : Sgs, Geo-chem Loading Capacity : 19mt In 20'fcl

- 4-layer mask of TP Mask box of 50 pieces.Goods available for delivery always. - Usually ships in 7-10 days + Imported materials. + No chemicals, no skin irritation, safe for users + Pass the TCCS: 01: 2020 / CBTC-EUPHAR + ISO 9001: 2015 + We have Certificate of CE Preventing smoke, dust and bacteria from entering and preventing dangerous respiratory diseases. Use effectively when traveling on roads or working in hospitals, hazardous industrial environments. Air filter fabric is waterproof, breathable, does not cause skin allergies. The nose bar is easy to shape, helps to fix the mask and creates tightness to cover the face. Rugged strap, good stretch makes sense of comfort to use. - Port of loading: Hochiminh City, Vietnam - Payment terms: TT - The price Exw : 65-70$/carton. 1carton = 50 box. 1 box=50 piece. (Prices vary by week) - We can ship 1 cont 40' every week.

Shubhlaxmi Industries is a pioneer manufacturer/processor and exporter of Psyllum Husk. We provide husk fiber globally keeping its freshness and goodness intact. The botanical name of Psyllum husk is Plantago Scraba. It is a member of a plant name Plantago. It is commonly known as isabgol. Psyllum Husk is the outer portion of the seed of the plant. It is extremely hygroscopic hence it can absorb water much more than its weight. It has been originated from Mediterranean region but nowadays it is cultivated in North Gujarat, West Rajasthan and some states of North India. Basically, Psyllum husk is very old herb that is used since ancient time as laxative. It is completely natural anti diarrheic. It is very fibrous; it throws toxins out of the intestine and stomach. It is top herb that is used in weight control. It is used for thickening ice cream. It is generally consumed after soaking it in the water. Specification HS Code : 012119032 Grade : 99% 98% 95% 85% powder 99% Moisture 12% Max 12% Max 12% Max 12% Max 12% Max Total Ash 4% Max 4% Max 4% Max 4% Max 4% Max Acid Insoluable Ash 1% Max 1% Max 1% Max 1% Max 1% Max Light Extraneous Matter 1% Max 2% Max 5% Max 15% Max 1% Max Swell Volume 40 Ml/gram Max 40 Ml/gram Max 40 Ml/gram Max 35 Ml/gram Max 40 Ml/gram Max Insect Fragments Per 25 Gram 100 Parts Max 100 Parts Max 100 Parts Max 100 Parts Max na Salmonella Per 10 Gram absent absent absent absent absent E.coli Per Gram absent absent absent absent absent Yeast And Mould Per Gram 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max Packing : 25 Kg Netpaper Bags With Inner Food-grade Poly-liner Quality Assurance : Sgs, Geo Chem,eu Standards,usfda Origin : Gujarat, Rajasthan, Madhyapradesh Loading Capacity : 11mt In 20'fcl & 26mt In 40'fcl

Hulled sesame seeds are India's owns harvesting product since years. Shubhlaxmi Industry brings to you the premium quality Hulled sesame seeds with Auto Dried process. Hulled Sesame Seeds are Source of most nutritious seeds because of its proteins and valuable minerals. The husk hull (upper skin) of these seeds are removed hence are called as Hulled Sesame Seeds. The botanical name of Natural Sesame Seeds is Sesamum indicum and it belongs to family Pedaliaceae. Finest quality of natural sesame seeds are dried and hulled mechanically. Natural sesame seeds can be sundried too to get hulled sesame seeds. Sesame seeds are oxidative and hence can reverse the liver damage. In Arabian countries, Tahini is mixed with Date syrup to make sweet drink. Hulled Sesame Seeds are widely used in breads, burgers, sauces, cereals, crackers, spreads, drinks, granola, candies,food dish garnishing & various other bakery and confectionary products to enrich its taste and nutritional values. Specification HS Code 012074090 Purity Levels : 99.90%/99.95%/99.97%/99.99% Moisture : 4% Max Oil Content : 48% Min Admixture : 1%/0.03%/0.02% E-coil : Nil Color : Milky White Aflatoxin (b1+b2+g1+ Bellow 4ppb Salmonella absent/25gms Packing : 5/10/25/50 Kg Net Pp. & Brand Packing Quality Assurance ; Sgs,geo-chem Loading Capacity : 19mt In 20'fcl

Shubhlaxmi Industries is a manufacturer and exporter of top grade Bay Leaves. They are sold as dried whole leaf. We have a selection of quality Bay leaves packed under hygienic condition. The aroma of Bay leaves spread upon opening the pack and satiates the end user. The botanical name of Bay leaf is Laurus nobilis and it belongs to Lauraceae Family. They are elliptical in shape with one end pointed. The upper surface is olive green in color and has a shine. The lower surface is dull olive to brown in color. It has soft aroma and they are bitter in taste. Bay leaves are native to Mediterranean region and grow in Europe and California. Bay leaves are commonly known as Tej Patta in India. Bay leaves in Indian cuisines are mostly used in tempering. They are mainly used for adding flavor and aroma to pulao or curry. Crushed Bay leaves are used in making Biryani Masala. They impart even more delicate aroma to delicacies. Bay leaves are often used in flavoring soups and stews in Mediterranean cuisines. Bay leaves have some medical properties. They are useful in treating high blood sugar, migraine and headache, bacterial and fungal infection. They have anti inflammatory and anti oxidant properties. Specification HS Code ; 09109990 Color : Greenish,greenish Yellow Type : 98%/99% Machine Clean & Sortex Shape : Eliptical Moisture : 13% Max Length : 2.5-7.5cm Width : 1.6-2.5cm Volatile Oil : 1.5%max Ash : 4% Max Acid Insoluble Ash : 0.8%max Origin : Arunachalpradesh/sikkim Packing : 5/10/25/50 Kg Net Pp. & Brand Packing Quality Assurance : Geo-chem Loading Capacity : 7mt In 20'fcl

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

2-head packaging machine (also can 4-18head according different capacity choice) Packaging speed 15bags/min Bag length 90-320mm Bag width 80-210mm Overall weight 400kg Power 1.8kw/220v Packaging capacity 20-1000ml Outer packaging size 820 x1220 x 2500mm Packaging form Back sealing This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc. Performance characteristics: 1. High precision digital sensors enable precise measurement to be achieved instantly. 2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use. 3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging. 4. Four scales work alternately, with fast packaging speed. 5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean. Host configuration: This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.

Features (%) Purity - 97 minimum Moisture - 10-12 maximum Total Ash - 4-6% Acid Insoluble residue - 0.4% maximum Starch - Negative Tanning Bearing gum - Negative Salmonella - Negative EColi - Negative Gum Arabic is used in printing, paint production, glue, cosmetics and various industrial applications, including viscosity control in inks and in textile industries. Gum Arabic is a complex mixture of polysaccharides and glycoproteins that is used primarily in the food industry as a stabilizer.

Features (%) Purity - 97 minimum Moisture - 10-12 maximum Total Ash - 4-6% Acid Insoluble residue - 0.4% maximum Starch - Negative Tanning Bearing gum - Negative Salmonella Negative EColi Negative Gum Arabic is used in printing, paint production, glue, cosmetics and various industrial applications, including viscosity control in inks and in textile industries. Gum Arabic is a complex mixture of polysaccharides and glycoproteins that is used primarily in the food industry as a stabilizer.

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20