Sharjah Thermal Paper Suppliers and Manufacturers

Bleached Softwood Pulp is commonly used in the production of most paper, paperboard and tissue products. Softwood pulp brings strength to the end product, as well as runnability and excellent dewatering properties to the production process.

Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.

ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm

This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM

Product Description Texol ATF Dex VI is a new generation, Premium class, fully synthetic, multi-vehicle ATF suitable for current and all previous types of vehicles needing Dexron type Transmission fluids. The product is made using fully synthetic base oils and carefully selected friction modifiers, anti-wear additives, viscosity index improvers and oxidation inhibitors. Synthetic base oil provides high viscosity index and high operating range besides providing very low pour point. Applications Texol ATF Dex VI is a multi-vehicle ATF recommended for almost all the latest automatic transmissions needing Dexron VI and Mercon LV fluids. It is suitable for Voith, BMW and ZF transmission oils such as 5 speed, 6 speed, 7 speed, 8 speed and 9 speed gear boxes (Lifeguard), besides applications requiring JASO 1A oil. Texol ATF Dex VI is recommended for use in Allison C3, C4 applications, Chrysler ATF +3 and +4; ATF 134, T-IV, Type WS, Mopar 8&9, SP-IV, LT 71141, 3309, 3403, etc. Features and Benefits Good viscosity/temperature characteristics. High thermal stability. Very good low temperature properties. High stability to aging and high chemical resistance. Resistance to wear and good friction characteristics. Excellent corrosion protection. Quality, Specifications and Approvals GM DEX VI JASO 1A Texol's proprietary specifications. Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.

Product Description Texol Super Duty S 10W40 CI-4 is a Semi-Synthetic heavy-duty multi-grade diesel engine oil developed for longest drain interval to use in high speed diesel engines; specifically formulated for on-highway and off-highway applications. Applications This oil is recommended for use in naturally aspirated and turbo-charged diesel-powered equipment from leading Japa-nese, European and American Manufacturers, mixed fleets, On-highway light and heavy-duty trucking, off highway indus-tries including construction and mining. Features and Benefits Exceptional Thermal and Oxidation Stability ensures trouble-free operation. Reduced maintenance costs due to minimized engine overhaul periods. Advanced detergency/dispersancy leading to cleaner engines and longer component life. Stay in grade shear stability provides wear protection and viscosity control. Specifications and Approvals API CI-4 ACEA E4/E7-16 MB 228.5 MAN M 3277 Volvo VDS-3 Scania LDF -2 Deutz DQC-I-10 MTU Type -3 Mack EO-N / Mack EO-M Plus Cummins CES 20078 CES 20077 Renault RLD-2 Global DHD-1 Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.

Product Description Texol Super Duty Plus SAE 15W40 API CI-4 is a heavy-duty multi-grade diesel engine oil for use in high speed diesel engines; specifically formulated for on-highway and off-highway applications. It complies with the low emission law especially Exhaust Gas Recirculation (EGR) systems. Applications This oil is recommended for use in naturally aspirated and turbo-charged diesel-powered equipment from leading Japanese, European and American Manufacturers, mixed fleets, On-highway light and heavy-duty trucking, off highway industries including construction, mining, quarrying and agriculture. The oil is backward compatible with other API Diesel classes like API CH-4, CG-4, CF-4, CD, etc. Features and Benefits Exceptional Thermal and Oxidation Stability ensures trouble-free operation. Reduced maintenance costs due to minimized engine overhaul periods. Advanced detergency/dispersancy leading to cleaner engines and longer component life. Stay in grade shear stability provides wear protection and viscosity control. Designed for use with fuels with Sulphur of 5,000 ppm. Engine durability where EGR is provided. Specifications and Approvals ACEA E-7 (2016) API CI-4 (Approved by API) API CH-4 / API CG-4 / API CF-4 / API CF / API SL / API SJ Caterpillar ECF-2 / ECF-1-a Cummins CES 20078 / 200777 / 20076 Detroit Diesel DDC 93K215 Global DHD-1 Mack EO-N / EO-M+ MAN M 3275 / 271 MB 228.3 / 228.1 MTU Type 2.0 / 1.0 Renaut RLD-2 Volvo VDS-3 / VDS (Volvo approved) Deutz DQC III-10 Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.