Paraformaldehyde is a polymer of formaldehyde with the chemical formula (CH2O)n, where n is typically in the range of 8 to 100. It is a white, crystalline solid composed of small, polymeric formaldehyde units. Paraformaldehyde is commonly used as a solid form of formaldehyde, and it has various applications in different fields. Form and Structure: Paraformaldehyde is a low-molecular-weight polymer of formaldehyde, consisting of repeating CH2O units. It is often produced in the form of white, crystalline granules or as a powder. Uses: Fixative in Histology: Paraformaldehyde is commonly used in histology and pathology laboratories as a fixative for preserving biological specimens for microscopic analysis. Disinfectant: It has disinfectant properties and can be used for sterilizing equipment. Crosslinking Agent: Paraformaldehyde is used in the crosslinking of proteins, peptides, and nucleic acids in molecular biology applications. Chemical Synthesis: It serves as a source of formaldehyde in various chemical reactions and syntheses. Handling and Safety: Paraformaldehyde should be handled with care, and precautions should be taken to avoid inhalation, skin contact, or ingestion. When paraformaldehyde is heated, it releases formaldehyde gas, which is a strong irritant. Adequate ventilation and protective equipment should be used when working with paraformaldehyde. Dissolution: To use paraformaldehyde as a fixative or in other applications, it is typically dissolved in water to generate a formaldehyde solution. Storage: Paraformaldehyde should be stored in a cool, dry place away from heat sources and incompatible materials.
Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.
Muriate of potash is the most cost-effective source of potassium and is suitable for replenishing the potassium-depleted soils of all the types. It is recommended for application to most grain, oilseed, sacchariferous and fibre crops with a high need for potassium and a low sensitivity to chlorine, as well as for an annual soil fertilization in order to maintain the potassium content at the optimum level.
Assay 99%
Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer that is fire resistant and heat tolerant. Resin is a versatile material that has a highly stable structure. Melamine can be easily molded while warm but will set into a fixed form, which makes it suitable for certain industrial applications. This compound is considered safe for its normal uses, but food products that are contaminated with it can be unsafe for consumption. Application: Melamine is mainly used for high-pressure decorative laminates such as Formica, melamine dinnerware, kitchen worktops, furniture, laminate flooring, adhesives for board materials such as particle board (chipboard), MDF (medium-density fibreboard) and plywood, oriented strand board (OSB) and laminated veneer timber (LVT). Packing: 25kg bags, 50kg bags, 1000kg jumbo bags. Item Specification Appearance: Fine, white crystalline powder Melamine, % by weight: 99.8 min Ash, % by weight: 0.01 max Moisture, % by weight: 0.1 max Screen analysis % on 40 mesh % thru 325 mesh: 1.0 max 35.0 max Color, APHA: 15 max
Dimethyl Formamide Dimethylformamide (DMF) is a clear, colorless, hygroscopic liquid with a slight amine odor. The solvent properties of DMF are particularly attractive because of the high dielectric constant, the aprotic nature of the solvent, its wide liquid range and low volatility. It is frequently used for chemical reactions and other applications, which require a high solvency power. The product is known as a universal solvent. The high solubility of polyacrylonitrile in DMF, together with the good miscibility of DMF in water makes DMF the preferred solvent to produce acrylic fibers. Also, the spinning of polyurethane based elastomers is performed from DMF based solutions. Another significant application is the use of DMF as a solvent for polyurethane-based coatings on leather and artificial leather fabrics. Application: It is used in the chemical industry as a solvent, an intermediate, and an additive; for example, in the production of pharmaceuticals, synthetic fibers, resins, agrochemicals, petrochemical industry etc. Packing: 190kg Drum, IBC, ISO Tank, Flexi Bag.
Toluene is also known as toluol. It is a colorless clear aromatic hydrocarbon with the formula C7H8, it is also referred to by the name methyl benzene. Toluene occurs naturally at low levels in crude oil and is a byproduct in the production of gasoline by a catalytic reformer or ethylene cracker. It is also a byproduct of the production of coke from coal. Toluene is used across several industries for various applications. It is predominantly used as an appreciable solvent. Application: As a solvent, toluene can be used in paints, paint thinners, adhesives, inks, resins, cleaning agents, leather tanners and inks. It can also be used to manufacture polymers that produce nylon, plastic soda bottles and for pharmaceuticals, dyes and cosmetic products. Toluene is also used as a coolant in sodium cold traps underneath nuclear reactor loops. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Purity (GC): 99.9 % Identity (IR): conforms Evaporation residue: 2.0 mg/l Water: 0.05 % Acidity: 0.0002 meq/g Alkalinity: 0.0006 meq/g Transmission (at 300nm): 70 % Transmission (at 310nm): 80 % Transmission (from 350nm): 98 %
Diethylene glycol is an organic compound. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, ether, acetone, and ethylene glycol. Compared to MEG, it has a higher boiling point, viscosity and specific gravity. Application: Polyester resins, polyurethanes, plasticizers, Antifreeze additive, Unsaturated polyester resins, Softening Agent, Solvents Coupler, Heat transfer agents or fluids, Chemical intermediates etc. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Appearance : colorless Purity: 99.8 wt % min MEG: 0.05 wt % max TEG 0.05 wt %: max Water: 0.05 wt % max Colour (pt-Co): 10 max Specific Gravity, 20/20 C: 1.1175-1.1195 5% vol: Min 242 C 95% vol: Max 250 C Acidity (as acetic acid): 50 mg/kg max Ash: 50 mg/kg max
Mono Ethylene Glycol MEG is a clear, colourless, virtually odourless, and slightly viscous liquid. It is miscible with water, alcohols, and many organic compounds, and has the molecular formula C2H6O2, CAS: 107-21-1. It has a specific gravity of 1.115 and a flash point of 110°C. Application: It is an important raw material for industrial applications. MEG is utilized in the manufacture of polyester (PET) resins, films, fibers, antifreezes, coolants, aircraft anti-icer and deicers and solvents. It is also utilized as raw material for paper industry, polyester Resins, adhesives and inks, chemical Intermediates, Heat Transfer, Fluids. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag Item Specification Appearance Clear Colourless MEG Content Wt % min: 99.9 DEG Content Wt % min: 0.04 Specific Gravity @20/20 Deg C: 1.1151-1.1156 Water Wt. % max: 0.04 Colour (before heating) Pt-Co Units Max.: 5 Acidity (as acetic acid) Wt.ppm Max.: 10 Chlorides (as CL) Wt.ppm Max.: 0.1 Sulphates Nil Iron Wt.ppm Max.: 0.1 Ash Wt.ppm Max.: 10 Aldehydes (as ormaldehyde) Wt.ppm Max.: 10
Linear Alkylbenzene (LAB) is a raw material of an important anionic surfactant, Alkyl Benzene Sulfonate, widely used in daily chemical washing, textile auxiliaries, industrial cleaning, printing and dyeing, electroplating, leather and paper industry etc. LAB can also be used in lubricating oil, capacitor oil, part of the solvent etc. Application: LABs are used to produce linear alkylbenzene sulfonate (LAS) which is a biodegradable surfactant & has great cleaning properties and as such, it is an important component of detergents and cleaning solutions. Packing: Standard export neutral packing in Tanker, Bulk chemical carrier, Flexibag etc. Item Specification Appearance (visual): Clear & Bright Specify Gravity (15.5/15.5 °C): 0.85- 0.88 Bromine Index (Br2.mg/100g): 15 max Saybolt Color: +30 min Refractive Index (20 °C): 1.480- 1.485 Water Content (wt.ppm): 200 max Dialkyltetralin (wt.%): 1 max Paraffin Content (wt.%): 0.4 max Monoalkylbenzene Content (wt.%): 98.6 min C9 & lighter: 1 max C10: 6- 16 C11: 28- 39 C12: 25 - 40 C13: 10 - 30 C14 & heavier: 2 max Average Moleculer Weight: 238 - 250 2-phenyl isomer (wt.%): 15 min
Liquid ammonia / anhydrous ammonia (NH3) is an important chemical raw material with a wide range of applications. Liquid ammonia can be used as a refrigerant. It is mainly used to produce nitric acid, urea and other chemical fertilizers, and can also be used as a raw material for medicine and pesticides. In the defense industry, it is used to make propellants for rockets and missiles. Application: Agriculture Industry, Pharmaceutical Industry, Textile Industry, Refrigerant, Defense Industry etc. Packing: 100Ltr Cylinder, 800Ltr Cylinder, ISO Tank Item Specification Purity: 99.5 % Oil (Max): 0.02 % Moisture (Max): 0.5 % Residue On Evaporation % By Volume: 0.05 % Pyridine: Nil Napthanlene: Nil Phosphic: Passes Test Sulphur Compounds: Passes Test
Glacial acetic acid (CH3COOH) is commonly used as analytical reagents, general-purpose solvents, non-aqueous titration solvents, chromatographic analysis reagents, and organic synthesis. used for the synthesis of vinyl acetate, cellulose acetate, acetate, metal acetate and halo-acetic acid. It is also an important raw material for pharmaceuticals, dyes, pesticides and organic synthesis. Application: Mainly used in the production of vinyl acetate monomer, then acetic anhydride and ester production. Packing: 30kg Drum, 215kg Drum, 1000 Kg IBC, ISO Tank. Item Description Acetic acid: Min. 99.8% Color(APHA),Pt-Co: Max. 10 Acetaldehyde: Max. 0.05% Formic acid: Max. 0.06% Water: Max. 0.15% Iron(Fe): Max. 0.0004% Residue after evaporation: Max. 0.01% Permanganate: Min. 30min
Calcium Nitrate with Boron is a highly efficient source of Calcium and Nitrogen for plants. It enhances yield quality and prolongs shelf life of the produce without any traces of sulphate. It's a fortified fertiliser which includes boron between 0.2 to 0.3%.
ELTEE DMCC is known for its Top Quality Potassium Sulphate (water soluble) NPK - 00:00:50. We supply our products to 17 reputed countries of World and our product is well accepted by our valuable buyers. About Product : Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer. Packing: 25kg bags, 50kg bags, 1200kg jumbo bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance : White Powder K2O %: Min 50.0 Chloride (as Cl) %: Max 1.0 Moisture %: Max 0.5 Sulphur: Min 18.0 pH Value (1% Solution): 2-3 Insoluble Matter: Max 0.3 Sodium: Max 0.4 Na as NaCL: Max 1.1 Appearance : White free flow powder.
Gremlog Trading DMCC stands at the forefront of technological innovation with our advanced cryolite production, a pivotal component in the aluminium smelting process. Cryolite acts as a solvent for Bauxite, playing a critical role in the extraction of aluminium through the Hal-H�©roult electrolytic process. Our state-of-the-art production facilities employ rigorous quality control measures to ensure the highest standards of purity and particle size distribution in our cryolite offerings. As an integral part of aluminium production, cryolite functions as a conductive medium, facilitating the dissolution of alumina and enabling the extraction of aluminium metal. Our cryolite is engineered to possess optimal chemical and physical properties, enhancing its efficiency in the electrolysis process. Its precisely controlled particle sizes, available in various dimensions including 0-5 mm, 5-20 mm, 20-40 mm, 0-40 mm, and 5-40 mm, cater to the diverse needs of industries engaged in aluminium smelting.
Foster Cloth & Chemical
Our Cryolite/ Secondary Cryolite goes beyond primary aluminum production, finding applications in aluminum scrap recycling and various industrial processes. Whether you're involved in glass, enamel, ceramics manufacturing, or other industries, our Bath Material proves to be a versatile and valuable resource. Explore the high-quality Bath Material solutions offered by Gremlog , providing excellence in electrolyte materials for diverse industrial application Discover the versatility of our cryolite offerings, available in a range of sizes tailored to meet diverse industry requirements. Our commitment to precision and customization ensures that our high-quality cryolite aligns seamlessly with the specific needs of your aluminum smelting processes, providing optimal performance and efficiency.Choose from our meticulously graded sizes, including : 0-5 mm; 5-20 mm; 20-40 mm; 0-40 mm; 5-40 mm;
Our Bath Material goes beyond primary aluminum production, finding applications in aluminum scrap recycling and various industrial processes. Whether you're involved in glass, enamel, ceramics manufacturing, or other industries, our Bath Material proves to be a versatile and valuable resource. Explore the high-quality Bath Material solutions offered by Gremlog , providing excellence in electrolyte materials for diverse industrial application Discover the versatility of our cryolite offerings, available in a range of sizes tailored to meet diverse industry requirements. Our commitment to precision and customization ensures that our high-quality cryolite aligns seamlessly with the specific needs of your aluminum smelting processes, providing optimal performance and efficiency.Choose from our meticulously graded sizes, including : 0-5 mm; 5-20 mm; 20-40 mm; 0-40 mm; 5-40 mm;
To know the price and see more samples of products, visit our website White Spirit (solvent� 402� ) is a mixture of aliphatic and alicyclic C7 to C12 hydrocarbons with a distillation range of 142 - 200 C and boiling point 105 to 205 C. White spirit is a petroleum-derived clear liquid used as a common organic solvent in painting and decorating. This solvent is clear liquids, and water-colored and have a mild odor, are chemically stable and not corrosive. solvent 402 is used as an extraction solvent, as a cleaning solvent, as a degreasing solvent and as a solvent in aerosols, paints, wood preservatives, lacquers, varnishes, and asphalt products. -solvent 402 in paint industry is the most widely used as diluent and drainer. -solvent 402 in home is commonly used to clean paint brushes after use, to clean auto parts and tools, as a starter fluid for charcoal grills, to remove adhesive residue from non-porous surfaces, and many other common tasks. Types and grades of solvent 402: Three different types and three different grades of solvent 402 exist. The type refers to whether the solvent has been subjected to hydrodesulfurization (removal of sulfur) alone (type 1), solvent extraction (type 2) or hydrogenation (type 3). Each type comprises three different grades: low flash grade, regular grade, and high flash grade. The grade is determined by the crude oil used as the starting material and the conditions of distillation. In addition there is type 0, which is defined as distillation fraction with no further treatment, consisting predominantly of saturated C9 to C12 hydrocarbons with a boiling range of 140 200 C.
Product Name MTO/White Spirit Product Description Density : 0.76-0.81 Price of product ( USD price or FOB price) EX TANK USD 600- USD 700 Product origin : GCC / UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details : DRUMS/FLEXI ISO TANK 100 MT
