St-8612pc materials tensile test machine Standard: in accordance with GB 16491, GB/T 2951.1, UL1581, IEC 60811-1-1 standards Technical parameters: 1. Induction method: high precision load cell (sensor) 2. Capacity (optional): 100 / 200 / 500 / 1000 / 2000 / 5000 kgf 3. Unit (switchable): KGF, N, LBF 4. Can meet or surpass of reading: 0.4~100% 5. Load resolution: 1/200000 the same stage and the some resolution during the whole test 6. Class: 1 level 7. Load accuracy: 1% 8. Testing range: 800mm (exclude the grips) 9. Availability width: 340mm 10. Displacement resolution: 0.01/0.001mm 11. Normal non-metal large deformation test instrument: 1 set Metal deformation test instrument (elongation meter): normal distance 10/25/50/100mm optional 12. System constitution: above windows xp operating system, t2006 specific control software and a4 color print function for tester, indicator: computer system software and print function 13. Test speed: 1) metal specimen 0.01~250mm/min, 2) non-metal specimen: 0.01~500mm/min 14. Method of speed: keyboard input 15. High security: restrict protection 16. Over load: protect automatically when 10% of max exceeds. 17. Motor: ac servo motor 18. Tensile grips: select according to users products requirement 19. Power source: ac 220v10%, 50hz / 5a 20. Weight: approx. 280kg Polywood case
Tensile testing machine.
Tensile testing Machine
Advanced Tensile Test Machine specializes in testing the mechanical properties of various flexible packaging materials. It is mainly used to test the heat seal strength, tensile strength, peel force, elongation of pharmaceutical packaging materials, aluminum foil, PVC hard sheet, composite film, syringe and other products. Features Touch interface-more convenient design. Diverse testing modes are getting to meet various requirements. The measuring system is innovated in high-precision, good-linearity and fast -response. Unique function-sensors over-range protection. Precise multi-positioning technology drives system to run stably. Intelligent configuration (limit protection, over-load protection, automatic re-position and power-down memory) ensures the safety of users and the instrument itself. Auto-zeroing calibration after power-on. The curve of data synchronously shows the changing trend of force value during the test. The instrument complies with GMP management of user's three-level authority. The records of data can be queried, audited and tracked. Analyze data statistically in single and group. The micro-printer facilitate to get paper-data. Equipped with standard USB interface. Specialized communicating software can be used for real-time display, data analysis and storage. Pneumatic clamp saves operational time and manipulate fluently. The data can be uploaded to the cloud server directly by internet interface and the global remote query can be realized. Standards ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113, GB/T 13022, GB/T 8808, GB/T 1040, GB/T 4850, GB/T 7753, GB/T 7754, GB/T 453, GB/T 17200, GB/T 16578, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, QB/T 2358, QB/T 1130, YBB00152002-2015, YBB00212005-2015, YBB00232005-2015, YBB00222005-2015, YBB00182004-2015, YBB00202005-2015, YBB00242002-2015, YBB00212004-2015, YBB00132005-2015, YBB00142005-2015, YBB00152005-2015. Technical Specifications Force Range 500 N (Standard) 30N, 100 N, 1000N, 1500 N (Optional) Accuracy 0.5%FS Resolution 0.01N Accuracy of Displacement 0.5%FS Resolution of Displacement 0.1mm Test speed 0 ~ 800mm/min (Adjustable) Sample's Width 50mm (Normal) 30mm (Optional) Clamping Way Pneumatic Stroke 1000mm Dimension 540mm (L)�?450mm (B)�?1560mm (H) Net Weight 72 kg Configurations Standard: Instrument, Micro-Printer, Pneumatic Clamp, Professional Software and Communication Cable. Optional: Standard roller, test plate, sample cutter, clamp for breaking force, clamp for combined cover opening force, tensile clamp, clamp for needle puncture force, clamp for sliding, clamp for sealing body, clamp for heat sealing strength, clamp for connecting force, clamp for pull-out force, clamp for full-open force, etc.
1. Rubber tensile testing machine The tensile, tear, peel, compression, bending and shear tests of rubber products were carried out, measure the performance parameters of the product, such as tensile strength, elongation, elastic modulus and yield strength and son on. 1.1 The testing machine has overload protection device. When the applied force exceeds 2%-10% of the maximum capacity of the testing machine, the overload protection device ensures the automatic shutdown of the testing machine. 1.2 The test machine has limit position protection device. When the beam moves to the upper and lower limit positions, the limit device should act immediately to stop the movement automatically. 1.3 During the test, when the sample breaks, the test function automatically stops, the device automatically stops or according to set mode to returns, then stop.
1.Brief introduction This polypropylene pearl films tensile testing machine is to measure tensile strength and elongation at break of polypropylene pearl films( films of single surface heat and both surfaces heat, films of non-heat). 2.Sample Mateials of polypropylene pearl films include main material polypropylene resin and a certain amount of pearl materbatch. By the biaxial orientation tensile with method of membrane, so the polypropylene pearl films is made. When measuring its tensile strength and elongation at break, a sample with size 150x15mm±0.1mm should be taken from the whole film and then load tensile force to the sample with a speed of 250mm/min±10mm/min. 3.Technical specification of testing machine 1 Model Wtd-w1/w2/w5 2 Max. Capacity 1000n/2000n/5000n 3 Grade Grade 1 4 Measuring range 1%-100%fs 5 Relative error of indicating value ±1% 6 Force resolution 1/±300000fs 7 Displacement measuring range 0.2%-100% 8 Load speed range 0.005%-5%fs/s 9 Load speed precision When speed is less than 0.05%fs, precision is within ±1% When speed is more than 0.05%fs, precision is within ±0.5% 10 Deformation speed range 0.005-5%fs/s 11 Deformation speed precision When speed is less than 0.05%fs, precision is within ±1% When speed is more than 0.05%fs, precision is within ±0.5% 12 Displacement speed range 0.001-500mm/min 13 Displacement speed precision Within ±0.2% of set value 14 Range of constant load control, constant deformation control, constant displacement control 0.5%-100%fs 15 Precision of constant load control, constant deformation control, constant displacement control When set value is more than 10%fs, precision is within ±0.5% of set value When set value is less than 10%fs, precision if within ±1% of set value 16 Stroke of crossbeam 1000mm 17 Voltage 220v±10%, 50hz(should connect to the ground) 18 Power 400w 19 Dim. Of load frame 415x415x1650mm 20 Over weight of product 150kg
3. Main technical indicators: 1. Maximum test force: 5000N 2. Test force display range: 10N~5000N 3. Test force grading: no grading throughout the entire process 4. Test force measurement accuracy: better than �± 1% of the indicated value 5. Displacement resolution: 0.01mm 6. Displacement measurement accuracy: better than �± 1% of the indicated value 7. Cross beam movement speed control range: 0.05mm/min~500mm/min 8. Displacement speed control accuracy: better than �± 1% 9. Stretching stroke: 0-850mm 10. Overall dimensions (length �? wide �? Height: 450mm �? 450mm �? 1360mm 11. Power supply: 220V, 50Hz This machine is widely used for the inspection and analysis of metals, non-metals, and various composite materials. It is an ideal testing equipment for scientific research institutions, vocational colleges, industrial and mining enterprises, technical supervision, commercial inspection and arbitration departments, etc.
4.Main technical parameters 4.1. Capacity: 5, 10, 20, 25, 50100200kg (optional) 4.2. Unit switching: kg, N, LB 4.3. Load decomposition degree: 1/250,00 4.4. Load accuracy: 0.25% 4.5. Maximum stroke: 1000mm (excluding fixtures) 4.6. Test speed: 30-300 mm/min 4.7. Displacement resolution: 0.01 mm 4.8. Display device: touch screen (capable of displaying and printing test times, test values, maximum values, fracture values, etc.) 4.9. Motor: AC motor 4.10. Overall dimensions (L * W * H): 550 * 500 * 1240mm 4.11. Weight: 80kg 4.12. Power supply: 1 , 220V, 15A or specified 4.13. Delivery: One set of tension fixtures 5. Introduction to System Functions 5.1. It has tensile and pressure testing functions. 5.2. It has a pull stop function. 5.3. It can display displacement, has functions such as elongation, pressure, and other material testing machines. 5.4. There is an automatic stop alarm function for overload load setting. 5.5. It has an automatic save function, and can coexist with manual and automatic testing data up to ten times. 5.6. Use a list format to display the saved test data. 5.7. With an administrator password, users can modify their startup password to make machine management more secure. 5.8. Using software to calibrate the load value is extremely easy to calibrate. 5.9. The internal functions are set with full Chinese prompts, making the operation convenient and simple. 5.10. Rich testing functions, capable of conducting tensile tests, pressure tests, compressive tests, elongation tests, etc. 5.11. Display method: Real time display on the touch screen. 5.12. Tensile range: Standard configuration 200kg (optional). 5.13. The accuracy is 1/25000. 5.14. It can print test data and dates, making it easy to view test data for each stage 5.15. Conversion of three types of force units: N, Kg, and LB. During the testing process, 5 sets of test data at any position can be manually and automatically captured and printed. 7. Introduction This product tests the tensile strength, compressive strength, and elongation of various materials, semi-finished products, and finished products. It can perform tests such as peeling, tearing, bending, bending, and compression, and is suitable for use in industries such as metals, plastics, rubber, textiles, synthetic chemicals, wires and cables, leather, etc. 8. Design standards ASTM D903, GB/T16491, GB/T1040, GB/T8808, GB13022, GB/T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7, etc
Technical parameters Maximum test force 1000kg Unit of force N Kgf bf N KN Test accuracy Grade 0.1 Test stroke 2200mmWithout fixture Print items Save the data and then print, can be converted to PDF document. Test speed: 0-500mm/min computer Settings Shutdown mode: Break automatic stop Control mode PC control Power source servomotor
Main function : HZ-1001A Tensile testing machine mainly applied to test the froce of metallic and non-metallic materials, the force such as tension, compression, bending, shear,peel, tear or two-points extensions (need to add extensometer) and others., the material such as rubber, plastic, wire and cable, optical fiber and cable, safe belt, leather belt composite materials, plastic profiles, waterproof membrane, steel, copper, profiles, spring steel, bearing steel, stainless steel, castings, plate, strip, non-ferrous metal wire. Adopted photoelectric encoder to measure the displacement, the controller uses the embedded single-chip microcomputer structure with multi-function software, which combined with measurement, control, culculation and storage. It can automatic calculate the stress, rate of elongation (need to add with extensometers), tensile strength, elastic modulus, automated statistical results;automatically recorded the biggest point,breaking point, the designated point value or the rate of elongation; Using computer to display the dynamic curves in the testing process and process the data,After testing, it can re-analysis and editing the data by amplifying the curves through the graphics processing module, printing reports, product performance reached the international advanced level. Corresponding standard : GB/T16491-1996 electronic universal testing machine . Applicable industry : It is widely used in controlling the quality; Rubber & Plastics; metallurgical iron and steel; manufacturing machinery; electronic equipment; automobile production; textile fiber; wire and cable; packaging materials and foodstuffs; instrumentation; medical equipment; civilian nuclear energy; civil aviation; colleges and universities; research Laboratory; inspection arbitration, technical supervision departments;building materials, ceramic; Petroleum & Chemical; other industries. Technical parameter : model: HZ-1001A universal material shear testing machine Maximum load: 2ton, 5ton, 10ton( optional) Accurate grade:1 grade /0.5 grade Effective measuring range:From 0.2% to 100% (1 grade) / From 0.4% to 100% (0.5 grade) Tester resolution: Max load 1/200000, constant the resolution Load sensor: Basic configuration sensor max load: one Effective testing width: 400mm (can be widened according to customers requirement ) Effective tensile space: 400, 500, 600mm (can be increased the height according to customers requirement) Testing speed: from 0.001 to 500mm/min Tolerance: 0.5% / tolerance: 0.2% Min span :10mm, Max range of deformation 800mm Another configuration:Min span: 25mm, 50mm, 100mm. Max range of deformation 5mm, 10mm, 25mm. By standard export wooden case.
Capacity (n): 10/20/30/50/100 Accuracy: grade 1 Measuring range: 0.25 / 0.5 / 0.75 / 1.0 Relative error: ínía1.0% Effective tensile stroke: 750 / 580mm Speed adjusting range: 10 - 250mm/min-2 / 5 - 150mm/min-2 Power supply: 380vac
Plastic Film Tensile Test Machine is suitable for testing the peel force, heat seal strength, tearing resistance, deformation, puncture resistance, open force, low speed unwinding force of plastic film, composite film, soft packaging materials, adhesives, rubber, paper fiber and other products. Features More convenient design-Touch Interface. The screw driving system greatly improves the accuracy of the displacement and can realize the continuously variable transmission. The process of measuring maximum value, average value and real-time value is fully intelligent. The test results can be outputted for group statistical analysis. Over-load and emergency power-off protection assure the safety. Equipped with micro-printer and USB interface, Multiple selection of units: N (Newton), KN\m, lbf pounds, g (gram force). The instrument is compatible with ISO, JIS, ASTM, DIN and other related international standards. Principle The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber. Standards ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113, GB/T 13022, GB/T 8808, GB/T 1040, GB/T 4850, GB/T 7753, GB/T 7754, GB/T 453, GB/T 17200, GB/T 16578, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, QB/T 2358, QB/T� 1130 Technical Specifications Test Range 200N (Optional 30N, 50N, 100N) Accuracy 1%FS Width of Sample 50mm (Standard) Test Speed 1-500mm/min (Adjustable) Stroke 600mm Dimension 450mm (L) 580mm (B) 1100mm (H) Power Supply AC 220V 50Hz Net Weight 50 kg Configurations Standard: Instrument, Universal Grips, Micro-Printer. Optional: Computer, Professional Software, Communication Cable, Standard Roller, Test Plate, Sample Cutter, Clamps for Floating Roller, Low Speed Unwinding Device.
High Accuracy Factory Price Elastic Band tester Plastic Bag Polymer Laboratory Mask Elastic Band tensile testing machine Application To test the tensile strength, peeling strength, heat sealing strength,tearing strength, piercing strength, compression strength, bending strength, and cutting strength of plastic film, composite film, tape, soft packaging material, rubber sheets, paper, non-woven fabrics and other packaging materials, widely used in industries of plastic films, food, pharmaceuticals, inspection agency, research institute, college and so on. Standards ASTM D828,ASTM E4,ASTM D882,ASTM D1938,ASTM D3330,ASTM F88,ASTM F904,ISO 37,JIS P8113,etc. u With flexible interface and control mode, it can be used for multiple tests such as tensile test, peel test, seal test, tear test, puncture test, compression test, bending test, shear test, etc. Speed, thickness, clamping distance and other parameters can be set. u The measurement accuracy is high, the test measurement accuracy can reach 0.5 grade. u Computer controlled; online display of test result, auto data storage and analysis, multiple curves record, zoom in/out, computer print. u Fully digital control system with imported AC servo system and motor, control displacement with zero drift. u Using high precision ball screw loading; loading smoothly; long service life of testing machine, long-term stability and energy saving. u Load/deformation measurement: with multiple sub-channels, multiple sensor extension measurements are available. u Wide speed range, suitable for high and low speed test. u Open data structures, both result parameters and procedure data are allowed to use randomly, which is very convenient for users. Self-editing report function, data can be easily imported into Excel table, convenient for data-processing. u The control measurement unit can be either built-in (simple appearance, space saving) or external (easy to upgrade, maintain and operate independently from the microcomputer); u With perfect limit protection, overload protection, emergency stop and other safety protection functions. It can make the test run safely and reliably. u High sampling speed (100 times/s), make test results more accurate. u Core part is imported, with high precision and durable. u Double table standing design, easy and comfortable. u Various clips optional for different test purposes. u Touch screen, with need new software for elastic modulus.
Max 20KN digital electronic universal testing machine auto tensile testing machine desktop tensile testing machine Universal Testing Machine This Series machine can be applied to test lots of materials in rubber tensile elongation, compression, tear, big size peel (can 90 degrees and 180 degrees) and other mid-force mechanical test 5KN, 10KN,20KN, optional), such as tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons, thread, spring, wood, medicine packaging materials, tapes etc. Rubber, PVC, PE, Polymer, Plastic, Metal 1. A) Tensile test: Main test tensile strength 2. B) 3-points bending test: Test material compression Technical Specifications Item Technical parameters Max load 20KN Maximum Load 500N, 1KN,2KN,5KN,10KN,20KN optional Extensometer Comply with Extensometer (if need, please inform supplier before order) Control Mode Force from 0.2% to 100% / from 0.4% to 100% Weight 350KG Accurate Grade 1 grade / 0.5 grade Effective Measuring Range Force from 0.2% to 100% from 0.4% to 100% Measuring Accuracy Load Sensor Basic configuration sensor max load: one Power Supply 220V, 50HZ or according to the requirement We is a professional manufacturer focused on developing and producing packaging material test instruments. Founded in 2002, the company has received IOS9001 certification and recognized as high-tech enterprise and software enterprise by national authority. We hold numerous technology patents and software certificates from the national authority and gained awards for technological progress.
Tensile Tester TST-01 is used to test the mechanical properties of various materials such as stretching, tension, tearing,peeling, deformation, seal strength, adhesiveness, puncture force, etc. It is suitable for plastic films, sheets, composite materials, paper, rubber, textiles, medical packaging, etc. It's specially designed for plastic film testing by standard ASTMD882.
The universal testing machine is suitable to be used in: 1) production lines, where the operator has to be fast and efficient, and accurately control the test, 2) testing lab environments, where using the advanced software, the users can analyze the test data, have full control on processing, filling, and test management. The universal testing machine(utm) is used to test the tensile and compressive strength, flexural and bending strength and shearing strength of materials. The utm can perform many different varieties of tests on an equally diverse range of materials, components, and structures such as iron, steel, steel bar, rebar, rod, spring steel, wire, cable and so on. Our utm models are modular and can be adapted to fit the customers requirements. The utm can accommodate many kinds of materials, ranging from hard samples, such as metals and concrete, to flexible samples, such as rubber and textiles. This makes the universal testing machine equally applicable to virtually any manufacturing industry. The universal testing machine can evaluate materials properties such as tensile strength, elasticity, compression strength, yield strength, elastic and plastic deformation, bending strength and strain hardening. Different models of universal testing machine have different capacities, some as low as 100n and others as high as 3000kn. High stiffness of the leading screw and robust crosshead structure, maximum elimination the effection of load frame deformation; Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension etc., this utm can be used to metal, non-metal, composite material like rubber, steel wire, plasitc, seat belt, textile character test.
1. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 2. Features of testing machine 1) Adopting aluminum alloy cover, with attractive streamline structure 2) Mainly used to test mechanical properties for metal, non-metal and composite materials 3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) With functions of automatic return to original position, intelligently, efficiently, quickly 7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
1Max. Load100KN 2Resolution of test force1/±300000 3Resolution of displacement0.001mm 4Precision of crossbeam displacement±0.5% 5Precision of deformation±0.5% 6Measuring range of test force1%-100%FS 7Relative error of test force±1% 8Relative error at zero point±0.5% 9Speed of crossbeam0.01-500mm/min 10Precision of crossbeam speed±1% 11Speed range of load0.005%-5%FS/s 12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 13Speed of deformation0.005%-5%FS/s 14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 15Stroke of crossbeam800mm 16Effective tensile height650mm 17Effective test span500mm 18Effective compression height700mm 19Clamps for round specimenÃ?4-9mm; Ã? 9-14 mm 20Clamps for flat specimen0-7mm, 7-14mm 21Diameter of compression platen150mm 22Voltage and power220V±10%, 50Hz, 1.5KW 23Dimension of main machine850X555X1900mm 24Weight of main machineabout 650kg
1Max. Load200KN 2Resolution of test force1/±300000 3Resolution of displacement0.001mm 4Precision of crossbeam displacement±0.5% 5Precision of deformation±0.5% 6Measuring range of test force1%-100%FS 7Relative error of test force±1% 8Relative error at zero point±0.5% 9Speed of crossbeam0.01-500mm/min 10Precision of crossbeam speed±1% 11Speed range of load0.005%-5%FS/s 12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 13Speed of deformation0.005%-5%FS/s 14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 15Stroke of crossbeam1000mm 16Effective tensile height600mm 17Effective test span600mm 18Effective compression height500mm 19Diameter of compression platen100mm 20Voltage and power380V±10%, 50Hz, 3KW 21Dimension of main machine1050X750X2600mm 22Weight of main machineabout 1600kg
1Max. Load300KN 2Resolution of test force1/±300000 3Resolution of displacement0.001mm 4Precision of crossbeam displacement±0.5% 5Precision of deformation±0.5% 6Measuring range of test force1%-100%FS 7Relative error of test force±1% 8Relative error at zero point±0.5% 9Speed of crossbeam0.01-500mm/min 10Precision of crossbeam speed±1% 11Speed range of load0.005%-5%FS/s 12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 13Speed of deformation0.005%-5%FS/s 14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value 15Stroke of crossbeam1000mm 16Effective tensile height600mm 17Effective test span600mm 18Effective compression height500mm 19Diameter of compression platen100mm 20Voltage and power380V±10%, 50Hz, 3KW 21Dimension of main machine1050X750X2600mm 22Weight of main machineabout 1600kg
