taic for sale, Payment Terms : T/T, Bank or Wire Transfer, Cryptocurrency, PayPal, Western- Union, Ria-Transfer Total or Minimum order Quantity ?, For Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well
Peroxide crosslinking agent TAICTriallyI isocyanurate(TAIC) Formula: C12H15N3O3 Molecular Weight: 249.27 CAS#: 1025-15-6Specification: ProductsTAIC-ATAIC-BTAIC-PGradeRefinedNormalPowderAppearanceClear liquid or crystalClear liquid or crystalWhite powderHue(Pt-Co)
Crosslinking agent TAIC liquidCASNo.1025-15-6EINECS213-834-7CharacteristicsHigh quality crosslinking coagent for improvement of crosslinking efficiency by three functional allyl groups.With a triazine ring, heat resistance is greatly improved.Various polymers can be greatly improved by copolymerization.1Heat resistance2Mechanical characteristics3Hydrolytic resistance4Weather resistanceApplications PropertiesImprovement of various rubbers and fluorine rubber.Improvement of plastic.EVA film for solar battery encapsulation.Material for polymer alloy.PropertiesChemical formula C12H15N3O3Appearance Slightly yellowish liquid or white solidViscosity 80110mPas(30)Melting Point 2327Moisture Max 0.1%Packing:25kgs or 200kgs per drum 25kgs/bag
Radiation crosslinking agent TAICChemical name: Triallyl isocyanurateCAS No: 1025-15-6Density:1.11Melting point: 24-28°CVapor pressure: 3mmHg at 114°CSpecific gravity: 1.15 at 30°CBoiling point: 119-120°C (144°C at 3mmHg)Refractive Index(n30D): 1.5070~1.5100Flash Point: 245°C by Pensky-Martens MethodSolubility: not dissolves in water, slightly dissolved in alkane, and completely dissolves in aromatic hydrocarbon, alcohol, acetone, hydrocarbon halides and cyclopentane hydrocarbon, etc..Toxicity:LD50=660mg/kg(laboratory tested) All the homopolymers, copolymers and ethylene series of TAIC are non-poisonous. TAIC is widely used as a coagent for peroxide crosslinking or radiation crosslinking of Chlorinated Polyethylene (CPE), EPDM, Fluroelaster and so on.TAIC is availavle for linking by x-ray, y-ray electron or ultra violet ray radiation and the product polyolefines have the superior insolubility to solvents and the tensile strength at high temperature could be improved.TAIC is effective modifier to heat resistance with increasing of crosslinking density for peroxide crosslinking denisty for peroxide crosslinking of CPE. Since TAIC acts as an acceptor of HCI which is envolved from CPE at crosslinking reaction and deteriorates its physical properties.TAIC is the most effective coagent for crosslinking EVA.TAIC preferably contributes to promote crosslinking rate and also to improve its heat resistance, compression set and abrasion resistance
Taic is multifunctional alkene monomer with aromatic heterocycle. It is not dissolves in water, slightly dissolved in alkane, and completely dissolves in aromatic hydrocarbon, alcohol, acetone, hydrocarbon halides, cyclopentene hydrocarbon. Taic is widely used as the cross-linking agent, modifier and assistant vulcanizer of thermoplastics, ion exchange resin and special rubber. It is also an intermediate of photocureable coating, photoresists and flame retardant. Iron drums or paper bags lined with pvc film bags; net weight: 200kg or 25kg;ibc drum 1000kg net weight. Store in cool, shady, dry and ventilated places. Keep away from moisture, fire and solarization
.Shipping line
Sodium cyanate, potassium cyanate, silane coupling agent, ammonium carbonate & TAIC.Manufacturer
BIPB, DHBP, TMCH, co-crosslinking agent TAIC and flame retardent TBC, microcapsules, perillaldehyde, perillartine and strawberry acid.
Chemicals like DCP, TAIC, TGIC, DMP, AA, MAA, THPA, HHPA, MTHPA, MHHPA, DHBP, DPBMH, DCBP, TAC, TMPTMA, PDM, BIPB.
Bpo75% is a free flowing granular form of water damped diacyl peroxide, used as initiator of polymerization in styrene, acrylic resins; and curing agent for unsaturated resin and elastomers. Melt point:103-1, 27;c(decompose)slightly soluble in water, ethanol, soluble in aether, acetone, chloroform and benzene.
Dcp is white crystalline. Relative density of 1.082.Decomposition temperature 120 Room temperature stable. Gradually become yellowish under light. Insoluble water, soluble ethanol, ether, acetic acid, benzene and petroleum ether. Mainly used as a curing agent for natural rubber, synthetic rubber, initiator of polymerization, also be used for polyethylene resin cross linking agent. Theoretical active oxygen 5.92% (purity 100%), 5.62% (95% purity); 20kg, carton Storage in dry and ventilative warehouse, avoid rain, moisture. Away from fire and heat, avoid exposure, with no direct contact with the acid or mixed. Shelf life of two years
Brief introduction Tmptma is light yellow transparent liquid, soluble in most organic solution, insoluble in water and alcohol. As cross-linking agent, rubber modifier, tmptma could decrease the radiation dosage, save the radiation time, increase the cross-linking density, low viscosity, high cross-linking properties, low vapour tension, high speed solid. As co-vulcanizing agent applicated in the synthetic rubber, it could improve the properties of anti-corrosion, anti-age and increase the rubber hardness, thermal resistance, absorb the per-oxide product (like dcp) smell when in the process of vulcanizing.Help the rubber more plastic when in the mix process, make the vulcanized rubber more harder. Suitable for mbr, epdm, acm and cr , etc. 25kg/200kg, net, pe drum. Sealed preservation, stored in a cool dark place, retention period a year.
Icason& 74;moca is white to light yellow loose needle crystalheated to black. It is soluble in ethanol, acetone, chlorobenzene, organic solvent such as toluene and butanone, insoluble in water. It is used for casting polyurethane rubber vulcanizing agent, cross-linking agent of polyurethane coating and adhesive, also can be used for curing epoxy resin. Liquid the mo card can be used in normal temperature curing agent and spray polyurea polyurethane curing agent. Package and storage§oo 20kg, net, waterproof kraft bag. Stored under shadow, good air circulation.
Crosslinking agent TAIC crosslinking agent, vulcanizing agent Scientific name: Triallyl isocyanurate English Name: Triallyl isocyanurate CAS NO: 1025-15-6 Molecular formula: C12H15N3O3 Indicators: project Indicators: Industrial products Premium grade Quality grade Powdering Appearance: yellowish liquid, yellowish liquid, yellowish crystal, white powder Content (> 96% > 98% > 99% > 70%) Acid value < 1.0 mg KOH/g < 0.5 mg KOH/g < 0.1 mg KOH/g < 0.5 mg KOH/g < 0.5 mg KOH/g < 0.5 mg KOH/g Purpose: 1. Crosslinking and modification of polyolefins: Crosslinking and modification of polyethylene, polypropylene, polyvinyl chloride and polyphenylethylene can improve heat resistance, mechanical strength, corrosion resistance and solvent resistance. 2. Vulcanization aids for special rubber: Ethylene-propylene binary or ternary ethylene-propylene rubber, fluorine rubber, silicone rubber, polyurethane and other special rubber efficient vulcanization crosslinking agent, using TAC as vulcanizing agent (DCP, BIBP), the general amount of 1.0-3% can significantly shorten the vulcanization time, improve mechanical properties, wear resistance, weather resistance and solvent resistance, especially for EPDM vulcanized with peroxide can provide sulfur-aiding. The effect of vulcanization can increase the vulcanization rate and prevent scorching. 3. The crosslinking agent of unsaturated polyester FRP: Hot-pressed unsaturated polyester FRP with a small amount of TAIC as crosslinking agent can significantly improve the heat resistance and mechanical strength, and the heat resistance can be increased to more than 200 C. 4. Polyphenylethylene dilute internal plasticizer: By copolymerization with TAIC, soft products with good heat resistance can be prepared, which can fundamentally change the main shortcomings of ordinary polyphenylethylene. 5. Intermediates: The intermediate of TBC and TCC can also be used to synthesize light curing coatings, new heat and weather resistant coatings of photoresist, etc. Packing: 25kg/barrel, 200kg/barrel
