Surge Arrester Factory Surge Arrester Suppliers and Manufacturers

Surge arrester scope of application AC gapless metal oxide surge arresters are used to protect the insulation of AC power transmission and transformation equipment from lightning overvoltage and operating overvoltage damage. It is suitable for over-voltage protection of transformers, power transmission lines, power distribution panels, switch cabinets, power metering boxes, vacuum switches, parallel compensation capacitors, rotating electrical machines and semiconductor devices. Taporel Electrical Insulation Technology Co., Ltd. is a great company that can provide you with Great Surge Arrester. Surge arresterâ??s Features and principles The AC gapless metal oxide arrester has excellent nonlinear volt-ampere characteristics, good response characteristics, no freewheeling, large current capacity, low residual voltage, strong suppression of overvoltage, pollution resistance, anti-aging, and no altitude constraints. Simple structure, no gap, tight sealing, long life and other characteristics.

YH10W-33

YH10W-11

Polymer Surge Arrester/ Lightning Arrester High Voltage 11KV 15KV 33KV Arrester with High Breaking Capacity

1.Product Type: Surge arrester can be divided into many types according to its application as below: Distribution type,power station type,protecting capacitor type,transformer neutral point type ,protecting motor type,electrified railway type,line type.etc. Line type surge arrester can be divided into series spacing type and without spacing type and in series spacing type can be divided into supporting spacing and sure air spacing type. 2.Main Product Features: 2.1It has a series of outstanding features such as good protection performance,high circulating capacity ,less reaction time,smooth steep-wave characteristic. 2.2 Excellent silicon rubber material is used in composite housing,possessing good anti-tracking and ageing-resistant performance as well as good hydrophobicity ,ion transferring and high pollution proof. 2.3 Special technique and internal structure are used in composite housing surge arrester,possessing higher technical strength and good explosion-proof performance. 3.Service Conditions: 3.1 Ambient Temperature: - 40 + 50 3.2 Altitude: 1000m; 3.3 Frequency : 48 Hz , + 50 Hz; 3.4 Power Frequency Voltage exerted long-time on surge arrester shall not exceeds continuous operation voltage; 3.5 Earthquake intensity is not more than 7 grades; 3.6 Wind speed is not more than 35mm/s; Usage under exceptional conditions shall be negotiated by both parties.

DK-60 power supply series modular surge protective device(SPD) is designed according to IEC61643 standard. It is accordance with the criterion of Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm DIN-Rail Mounting. With working indication window, temperature control circuit breaker and built-in over-current protective circuit, the modular SPD can release automatically to avoid fire danger when it breaks down. With remote alarm connector, it is convenient for remote monitoring. The main module and the base are replaceable. The lightning protection modes is L-PE, N-PE (4P) or L-N-PE (3+1).

11KV/33KV/66KV/110KV/220KV Low & High Voltage Composite Polymer Suspension Type Surge Arrester Lightning Arrester Manufacturer Product Description Standards: IEC 60099-4 The ambient air temperature is no higher than +40 C, no lower than-40 C. The altitude above sea level dose not exceed 2000m. AC system frequency is 50Hz or 60Hz. AC voltage brought to bear on arrester for a long time dose not exceed arrester's continuous operating voltage. The maximum wind speed dose not exceed 35m/s. The earthquake intensity dose not exceed 7 degrees.

Medium voltage surge arrester are electrical devices designed to protect electrical equipment from surges or transients that occur on medium-voltage power systems. These systems typically operate at voltages between 1kV and 36kV, and they are commonly found in various industries, such as manufacturing, oil and gas, and utilities. Medium voltage surge arresters work by detecting and diverting excess voltage away from the equipment and toward the ground. They are typically composed of metal oxide varistors (MOV) or zener diodes, which provide a low resistance path to the ground during transient events. When a surge or transient occurs, the surge arrester conducts the excess energy to the ground, protecting the equipment from damage. MV surge arrester are selected based on the specific application, voltage requirements, and surge current capacity. They are often installed in parallel with the equipment they are protecting, with a short path to the ground. Proper installation and maintenance are important to ensure the effectiveness of the medium voltage surge arrester. Application of Medium Voltage Surge Arresters surge arrester medium voltage are commonly used in a variety of applications, including power distribution systems, industrial facilities, and commercial buildings. They are installed to protect equipment such as transformers, switchgear, motors, and other medium voltage electrical components from voltage surges or transients caused by lightning, switching operations, or other sources. Medium voltage surge arresters are also used for the protection of telecommunication networks, data centers, and other critical electronic equipment. They play a significant role in ensuring the safety and reliability of power systems, protecting equipment from damage, and reducing the risk of operational downtime. Proper selection, installation, and maintenance of medium voltage surge arresters are essential to their effective operation and long-term service life. For more information about medium voltage surge protection and varistor zno, please feel free to contact us!

Ac power arrester surge protector Applications: C/d class surge protective device for ac power system. Sensitive electronic equipment Telecom centers Automatic control centers Intelligent mansions Industrial enterprises Medical institutes Features: Din rail mounting for easy installation Plug connectors for quick and easy connection or rewiring 40ka maximum surge current Thermal disconnect device Status indicators visually verify protection level Surge protection device with n-pe residual current spark gap as 3+1 circuit Specifications about m40b3+n Parameterm40dnpe50 Iec /vde level ii/c ii/c Nominal operating voltage 110/220v ac 500v(n-pe) Max. Continuous operating voltage 275v 61630;/250v Leakage current at 1ma

Key specifications/special features for surge arrester: System nominal voltage(kv): 33 Type code of moa: yh10w-30/90 System highest voltage(kv): 36 Rated voltage of arresters(ur)(kv): 30 Continuous operationg voltage(ur)(kv): 24 Nominal discharge current(in)(kv): 10 High current 4/10 impulse withstand(ka): 100 2ms rectangular current(a): 250 Steep current impulse residual voltage(kv): 99 Lightning impulse residual voltage(kv) 5ka: 85 10ka: 90 20ka: 101 Switching current impulse residual voltage(kv): 69 Lind discharge class: i Pressure relief class: b, 20 Insulation impulse withstand voltage(kv): 170 Power frequency withstand voltage(kv): 95 Max. External riv(v):

A metal oxide arrester (MOA) is an electrical device that is designed to protect electrical systems and equipment from surges caused by lightning, switching operations, and other sources of overvoltage. The MOA technology utilizes a metal oxide varistor (MOV) element that provides low impedance paths for high voltage surges, thereby diverting the excess energy to the ground. YF POWER is a leading metal oxide surge arrester suppliers and metal oxide surge arrester manufacturers, recognized for their reliability, durability, and performance. YF POWER's MOA products provide superior protection against lightning and overvoltage surges, making them the ideal choice for use in power distribution systems, substations, wind turbines, and many other applications. YF POWER's MOA products are designed to meet international standards and undergo rigorous testing to ensure high performance and long service life. YF POWER's MOA technology features a robust construction that withstands harsh environmental conditions and provides years of reliable protection. YF POWER offers a range of MOA products, including station-class MOA, intermediate-class MOA, distribution-class MOA, and many more, to meet the diverse needs of customers. YF POWER's commitment to excellence has made it a trusted partner to customers across the globe. Advantages of Metal Oxide Arresters Metal oxide varistor surge arrester offer several advantages over other surge protection devices, including: High Energy Handling Capability: gapless metal oxide surge arrester can handle high energy surges, making them suitable for a wide range of applications, including high voltage and extra high voltage power systems. Fast Response Time: metal oxide type lightning arrester have a faster response time than other technologies, providing immediate protection against overvoltage surges. Low Voltage Protection: Metal oxide arresters can provide low voltage protection, making them suitable for electronic equipment, such as computers and televisions. Long Service Life: Metal oxide arresters have a long service life, which reduces the need for maintenance and replacement. Environmental Resistance: Metal oxide arresters are resistant to harsh environmental conditions, making them suitable for use in various industries, including wind power and oil and gas. Overall, the advantages of metal oxide arresters make them a reliable and effective option for surge protection in a variety of applications. For more information about what material is used in metal oxide arrester and overhead power line hardware, please feel free to contact us!

UB2009 Guidedtype Fall Arrester Made of alloy steel In built gravity lock to avoid incorrect use In event of fall quickly grips the rope works on 14 mm dia polyamide rope Conforms to EN 353-2. For price, specification and other details please contact us.

UB2005 SS Light weight guided type fall arrester made of stainless steel In built gravity lock to avoid incorrect use Two deliberate operation require to open and close built inrope guided wheel for tangle free movement with Anti panic feature conforms to ANI Z359.1 For price, specification and other details plese contact us

UB2011 Guidedtype fall arrester made of high strength steel in built gravity lock to avoid incorrect use in event of fall quickly grips the rope detachable ropegrab device works on 14mm dia polymaide rope. conforms to EN 353-2 For price, specifications and other details please contact us

Infinity Precision-Machinery mainly cooperate with famous company at home and abroad, can machine all kinds of precising parts made from series of material, also can assembly. The products are mainly used in projecting and agricultural machines, oil field equipments,auto, Railway Equipment ,medical apparatus and so on.

Lightning Arrester is mainly used to protect distribution transformer, cable connector and electric equipment from being damaged by lightning impulse voltage and operated over-voltage. The varistor used in the arrester is subjected to a series of physical and electrical tests to ensure the protective ability, and the high-level housing verifies the insulating properties. The arrester has been designed and type tested according to IEC standard. Standard.

Surge suppressor 20-5000 0.27KG 18*14*45(CM)

Lighting arrestor 10-10000 2.3kg 49*20*7(CM)

Ndfeb magnet, magnetic assembly, ferrite magnets, smco, halbach array magnet, surge protection device, gas discharge tube, lightning protection earthing system, spd, gdt, arrester, surge, lightning.