We are timber factory from Estonia. Our company was established in 1992 and we have long and good experience in timber industry. Our production is birch, pine, spruce and larch edged timber. Thickness 20+ mm Width 100-250 mm Length 3000-6000 mm Grading system Nordic TC (blue book) grading rules Quality AB Drying Kiln dry (KD) Description For our spruce timber production, we use only high-quality wood. Other sizes are possible on request. Please contact us and send your request. We will consider any proposal.
Spruce timber - commonly also known under its latin name "Picea Abies" is widely distributed throughout continental Europe and is a timber tree of major economic importance. The large tree usually has a straight, cylindrical trunk and growns to a height of about 30 m (up to 55 m), with a large diameter of about 60 cm (up to 1,5m). Big sizes - beams: Thickness - from 100 up to 300 mm Width - from 100 up to 300 mm Length - 3000/4000/5000 mm Small size - beams: Thickness - from 40 up to 95 mm Width - from 60 up to 95 mm Length - 3000/4000/5000 mm Boards: Thickness - from 18 up to 50 mm Width - from 50 up to 250 mm Length - 3000/4000/5000 mm
Wide range of different planed KD pine and spruce boards Thickness from 12mm up to 30mm in standard Width: 40mm and up Lengths: 2.1m up to 6m Quality: A / AB
Wood, log, timber, planks and lumber including pine, spruce, walnut, oak, ash, hemlock, cherry, hickory, maple, douglas fir etc..Exports
Spruce is light and soft, but nevertheless has good strength and elasticity properties for its relatively light weight. It is not very susceptible to shrinkage and when dried remains stable. Its low natural durability can be compensated for by applying a protective coat of paint. Sourced from meticulously selected spruce trees, our Spruce Wood for industrial purposes is of the highest quality. Each piece of wood is processed using advanced techniques to ensure consistency and durability. Available in various dimensions to suit different industrial requirements. Responsibly harvested and processed to meet environmental standards
LVL Laminated Veneer Lumber for construction, packaging, furniture and other industry with high quality made from Leloi Global factory. We produce and supply many kind of LVL as: LVL Structural Timber LVL for furniture parts. LVL for packing. Above products are different to each other, from the quality to the price as well. We specially use all A grade local wood veneer for this product. Vietnam local wood species which made LVL look bright white and eye catching.
We are suppliers of raw and sawn timber from Cameroon as IROKO, Sapelli, PADOUK, Bubinga, Sipo, Maobi, Okan, Tali, Tola, Zebra, Teak, Mahogany, Tioma, Azobe, Bosse, Foga, Bibolo, FRAKE We offer a wide selection of pine, oak, poplar, etc. wood for the production of pallets: freshly sawn; dried; thermal treatment; with anti-mould treatment; boards with Pads: 90mm x 90mm x 90mm Desk: 1200mm x 90mm x 18mm Desk: 1200mm x 80mm x 18mm Desk: 1000mm x 90mm x 20mm Classification system: European - French CTBA classification rules 3A quality The description of Pallet boards elements Other dimensions available on request. Length: 1000mm, 1500mm, 2000mm, 3000mm, 4000mm, 6000mm Thickness: 16mm, 19mm, 22mm, 32mm, 47mm, 50mm, 63mm, 75mm, 100mm Width: 75mm, 100mm, 115mm, 125mm, 150mm, 175mm, 200mm, 215mm, 225mm, 250mm Materials: Radiata Pine (New Zealand, Argentina, Chile etc). Mongolian Scotch Pine (Pinus sylvestris), White Pine (Chinese Northeast) Grade: AA: No knots, blue spot or black line on both face and back), AB: One side has no knots and some knots on the other side, CC: Both sides have knots Colour: Natural wood color or carbonization Certificate: FSC, ISO, Phytosanitary Certificate, Fumigation Certificate etc. Thickness: customer's requirements Moisture Content: Customer Request
Qualit: german standard Moisture: 10 - 18% Certification: pefc / fsc Place of origin: slovakia, latvia and germany Stock location: slovakia, latvia and germany Size: 22, 36, 45, 46 mm Width: 90 - 250 mm Length: 4000 and 5000 mm
We are proposing high quality spruce timber, fresh cut and kiln dried of all sizes and dimensions.
Pine species kiln dry sawn. pack size approx 2.5M3.
We produce timber, squares, and laths, all freshly cut, with a maximum length of up to 6 meters (4 meters for laths). All of our products are cut to exact dimensions, never undercutting the specified size.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor