Horinontal split case pumps have been developed for the most exacting conditions and can be used for multitude operations such as pumping crude oil, oil and hydrocarbons. Further, it can also be used to pump river water, hot water and black water. The design features an axial split.
Horinontal split case pumps have been developed for the most exacting conditions and can be used for multitude operations such as pumping crude oil, oil and hydrocarbons. Further, it can also be used to pump river water, hot water and black water. The design features an axial split.
HS(V)type series pump is new generation single stage double suction split casing centrifugal pump that is designed and produced by foreign advanced manufacturing technology of 1990's 20th century.
Performance Range
Inlet diameter 125 1600 mm
Outlet diameter 80 1400 mm
Capacity 30000 m3/h
Head 200 m
Working temperature 105
Solid particles 80mg/L
Permitted working pressure 2.5 MPa
Permitted testing pressure 3.75 Mpa
Tobee®split case pump
Specification:
Size (discharge): 1 inch to 32 inch
Capacity: 3.4~ 7500 m3/hr
Head: 8.6~140m
Efficiency:up to 92%
Materials:cast iron, ss 304, ss 316, cd4mcu, duplex ss, bronze etc
S split case pump is a new generation of single stage double suction centrifugal split pump with high performance and efficiency upgraded from S type split case pump, it is mainly applied to liquid transferring occasions, including water works, air conditioner circulation water, heat supply pipe network system, building water supply, irrigation, drainage pump station, power station, industrial water supply system, fire fighting system, ship industry, water supply and drainage for mines.
Product name : Single stage double suction Split case pump
Item : KSB Omega type
Features :
---Axially split casing
---Double suction single-stage impeller, hydraulically and statically balanced.
---Horizontal or vertical installation
---Shaft sealed by gland packing or mechanical seal
---Various materials available with cast iron, ductile iron, bronze and stainless steel, or with corrosion proof coating used in wet parts.
Data sheet :
Flow: up to 12300m3/h
Head: up to 200m
Speed: 1480r/min, 2950r/min (50HZ) 1750r/min, 3540r/min(60HZ)
Temperature: 105max
Working pressure:2.5MPa
Application:
---Industrial and municipal water supply
---Chilled and condenser water circulating systems
Horizontal Axially Split casing pump is a new generation of single stage double suction centrifugal split pump with high performance and efficiency upgraded from S type split case pump, it is mainly applied to liquid transferring occasions, including water works, air conditioner circulation water, heat supply pipe network system, building water supply, irrigation, drainage pump station, power station, industrial water supply system, fire fighting system, ship industry, water supply and drainage for mines.
Product name : Single stage double suction Split case pump
Item : Andritz type
Features : ---Axially split casing ---Double suction single-stage impeller, hydraulically and statically balanced. ---Horizontal or vertical installation ---Shaft sealed by gland packing or mechanical seal ---Various materials available with cast iron, ductile iron, bronze and stainless steel, or with corrosion proof coating used in wet parts.
Data sheet : Flow: up to 36000m3/h
Head: up to 220m
Frequency: 50HZ / 60HZ
Temperature: 105 max
Working pressure:2.5MPa
Application: ---Industrial and municipal water supply ---Chilled and condenser water circulating systems
Kirloskar Horizontal Axially Split Casing Pumps type UP Thrubore
Range :
Delivery size upto 250 mm
Capacity upto 950 m3/hr
Heads upto 52 metres.
Application :
Suitable for handling water with slight impurities in Industries, Water Works, Storm Water, Irrigation, Sprinkler Irrigation, Fire-fighting, Air Conditioning Plants, Water Circulation, Waste Water Treatment Plants, Processing Plants, Power Plants, Fertiliser Plants, Refinery, Paper, Sugar and Textile Mills etc.
Constructional Features :
These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz.
Special Features :
* Direct or gear drive.
* Rotating assembly available for inspection or maintenance by removing only upper half casing without disturbing suction and delivery piping and motor.
* Pump axis horizontal or vertical
* Vertical pump, direct drive or with universal shaft arrangement
* Highest reliability.
Material of Construction :
Casing half Upper/Lower - C.I.. / Bronze / SGI / Cast Steel / CF8M
Impeller - C.I. / Bronze / Ph.Br. / Cast Steel / CF8M
Shaft - Carbon Steel / ST. Steel
Other materials on request.
FP40-400 Double-Flow Axial Split Case Pump with efficiencies of up to 91%, split case pumps help to save valuable energy. All pumps are fitted with a double-flow radial impeller which achieves very favorable NPSH value.
Centrifugal Pumps are operating successfully all over the world. They offer robustness and wear resistance and thus fulfil high customer expectations in terms of efficiency, life cycle, maintenance friendliness and economic efficiency.
Fields of application:
Cooling water, circulation water pumps
Power stations industrial plants
District heating networks
Raw water pumps for water treatment
Plants Drinking water pumps for water
Supply systems
Wholesale High Performance Eifel Brand Name Pipeline Pumps
Product Description
Pump type: EA series stainless steel single stage end suction centrifugal pump
Design Standard: European standard BS EN733/DIN24255
Structure: Horizontal,Axial End-Suction,Single-Stage,Volute Casing,Back pull-out
Discharge Size: DN32~300mm
Flange: DIN2501 PN16 GB/T17241.6 PN1.6
Casing: ASTM304/ASTM316
Impeller: ASTM304/ASTM316
Shaft: ASTM420 standard,ASTM304/ASTM316/ASTM1045 options on request
Shaft Seal: Mechanical Seal standard,Gland Packing options on request
Flow Rate(Q): 4~1584m3/h
Head(H): 2~150m
Speed: 1450/2900rpm(50Hz);1750/3500 rpm(60Hz)
Max Temperature: 85�°C(standard);105�°C(option on request)
Working Pressure: 1.0MPa(standard);1.6MPa(option on request)
Conveying Medium: water/liquid
Advantage: Interchangeable parts,high-effective,high performance,voice-saving,easily installed and maintained
Applications : Food and chemical industry,water supply and drainage,HVAC and Cooling Tower,marine-ballasting&bilge,booster and pressurization set,irrigation and agriculture,fire-fighting system,plants,mines,air-condition systems,etc.
The XBD-HS Series fire pump is designed as per NFPA20 standard, the pump is used to provide water to stand pipe, sprinkler, chemical mitigation and hydrant systems for fire suppression in industrial and commercial facilities. The performance is similar to Peerless AEF series
Product name :Split case fire pump (NFPA20 standard)
Item :electric driven, diesel dirven pump set
Features :
XBD series fire fighting pumps, including multistage pump, horizontal End suction pump, horizontal split casing pumps ,vertical inline pumps designed and manufactured in accordance with International Standard, can be motor powered and diesel powered, these pumps are ideal for fire fighting applications in harbors and wharfs, airports ), as well as ocean ships and industrial and civil high buildings.
Customer's requirements shall be tailored for higher capacities and pressure.
Data sheet :
Flow: up to 12300m3/h
Head: up to 200m
Speed: 1480r/min, 2950r/min (50HZ) 1750r/min, 3540r/min(60HZ)
Temperature: 105; max
Working pressure:2.5MPa
Application:
---Industrial and municipal water supply
---Chilled and condenser water circulating systems
---Water treatment plants
---Fire fighting
---Irrigation and sprinkler pumping stations
MSH Split Case Pump
Size (discharge): 1 inch to 32 inch
Capacity: 3.4~ 15000 m3/hr
Head: 8.6~140m
Efficiency:Up to 92%
Materials:Cast iron,SS 304,SS 316,Bronze etc
MSH Split Case Pump Introduction:
MSH Split Case Pump is Horizontal, Split-casing, and Double-suction centrifugal water pump. Double Volute casing is used to contract the axial force due to high head to extend the serve lift time of bearing. Because of the short distance of two bearing, the shaft is shortened to avoid much vibration.. Closed and Circulated cooling system is applied within the sealing house.The Shaft sleeve and O-ring are used to avoid any connection between the shaft and fluid.
MSH Split Case Pump Features:
Both inlet and outlet of this pump are placed under the axial line,, the pump casing is opened in the middle so it is unnecessary to remove the water inlet and outlet pipelines and motor.if repaired The pump moves CW viewing from the motor side. The pump moving CCW can also be made .
Both pump casing and cover form the working chamber of the impeller and there are threaded holes for mounting vacuum and pressure meters on the flanges ant both inlet and outlet have water draining plug on the lower side of flange
The impeller is static-balance and dynamic balance tested, fixed by the the side nuts and the Shaft sleeve nuts and its axial position can be adjusted via the nuts and axial force will be get balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axial end.
This pump shaft is supported by two centripetal ball bearings, which are mounted inside of the bearing chamber on both ends of the pump and lubricated with grease. The double suction seal ring is used to reduce the leakage..
This pump is driven directly via flexible coupling.(V-belt driving will be available if required).
The shaft seal is mechanical seal or packing seal .
MSH Split Case pump Parameter Selection Table:
MSH Split Case pump On-site Application:
MSH split case pump is suitable for transporting pure water or liquids with physical and chemical properties to water.
Suitable for mine
Suitable for water supply and drainage in factory.
Suitable for power station.
Suitable for urban water supply and drainage
Suitable for flood control.
Performance Range
Flow Rate (Q) Up to 8000 m3/h
Head (H) Up to 210m
Speed (RPM) 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ)
Temperature -10 Celsius to 130 Celsius
With short gaps in the both ends of support, XS type pump works stably with less noise and vibration. It can be risen speed operation to meet wider usage. Being inlet and outlet located in the same center line, the pipelines arrangement looks simple and beautiful. The rotor can be operated in reverse direction to avoid damage to the pumps from water hammer. Unique design of high temperature, using middle support, thickening pump casing, seal cooling and oil lubrication bearing make XS type pump suitable for working at 200, especially for heat supply newtwork requirements. XS type pump case body can be vertically or horizontally installation acoording to different working condition, with mechanical seals or packing seals. Wtih industrial designs to the shape of XS type pump, the line of pump is clear and beautiful to in line with modern aesthetics.
Cost advantage:
1. Using the advanced hydraulic model, the efficiency of XS pump is 2%~3% higher than the same type pumps. The operating cost minimum.
2. The vacuum height of XS type pump is risen 1-3 meter to reduce land construction investment and to extend the service life.
3. Using inport brand bearing, such as SKF, NSK and using various pump material make XS type pump suitable for any site working condition and minimize the maintenance cost.
Maintenance advantage:
1. With container type mechanical seal, the mechanical seal of pump is very easy and simple to replace.
2. With elastic ripess assembling, the rotor parts is easy and rapid to assembly and disassembly.
3. It is unnecessary to make adjustment to any gap when assembling.
We are one of the concrete pump manufacturers in Korea
Brand: SAMIL GIANT in Korea
Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m
Stationary pump, Line pump
We are able to send full details if you make an inquiry
