MSH Split Case Pump
Size (discharge): 1 inch to 32 inch
Capacity: 3.4~ 15000 m3/hr
Head: 8.6~140m
Efficiency:Up to 92%
Materials:Cast iron,SS 304,SS 316,Bronze etc
MSH Split Case Pump Introduction:
MSH Split Case Pump is Horizontal, Split-casing, and Double-suction centrifugal water pump. Double Volute casing is used to contract the axial force due to high head to extend the serve lift time of bearing. Because of the short distance of two bearing, the shaft is shortened to avoid much vibration.. Closed and Circulated cooling system is applied within the sealing house.The Shaft sleeve and O-ring are used to avoid any connection between the shaft and fluid.
MSH Split Case Pump Features:
Both inlet and outlet of this pump are placed under the axial line,, the pump casing is opened in the middle so it is unnecessary to remove the water inlet and outlet pipelines and motor.if repaired The pump moves CW viewing from the motor side. The pump moving CCW can also be made .
Both pump casing and cover form the working chamber of the impeller and there are threaded holes for mounting vacuum and pressure meters on the flanges ant both inlet and outlet have water draining plug on the lower side of flange
The impeller is static-balance and dynamic balance tested, fixed by the the side nuts and the Shaft sleeve nuts and its axial position can be adjusted via the nuts and axial force will be get balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axial end.
This pump shaft is supported by two centripetal ball bearings, which are mounted inside of the bearing chamber on both ends of the pump and lubricated with grease. The double suction seal ring is used to reduce the leakage..
This pump is driven directly via flexible coupling.(V-belt driving will be available if required).
The shaft seal is mechanical seal or packing seal .
MSH Split Case pump Parameter Selection Table:
Pump model Capacity(m3/h) Head(m) Speed(rpm) Power(KW)
MSH150 112--220 35--84 2900 30--55
MSH200 160--351 31--100 2900 37--110
MSH250 324--612 8.6--65.1 1450 22--132
MSH300 504--1663 8.7--140 1450--1470 22--680
MSH350 745--1570 10--125 1450--1470 55--630
MSH400 900--1620 32--85.5 980--1480 440--500
MSH500 1150--3800 10.6--108 740--970 110--800
MSH600 2300--4000 13--80 730--970 145--730
MSH700 2111--4896 39.5--99.5 742--980 397--1252
MSHS800 3960--6878 23--84 600--750 450--1600
MSH1000 6600--9900 32--52 600 1250
MSH1200 5832--14400 6--95.7 500--745 710--3450
MSH Split Case pump On-site Application:
MSH split case pump is suitable for transporting pure water or liquids with physical and chemical properties to water.
Suitable for mine
Suitable for water supply and drainage in factory.
Suitable for power station.
Suitable for urban water supply and drainage
Suitable for flood control.
Supplier: Mainly pump spare parts,such like impeller, pump casing,motor casing/housing,valve parts, and pump body
Supplier: Submersible solar pumps, submersible cable, submersible motor, solar panel, solar batteries, upvc casing pipes, upvc column pipes, hdpe pipes, grey pipes, cpvc pipes, plumbing pipes
Services: Manufacture
Supplier: Construction equipment spares for excavators, bulldozers, motor graders, wheel loaders of popular brands like cat, john deere, volvo, komatsu, case new holland and more. beds, blades, booms, buckets, cabs, counterweights sticks, cooling fans, hydraulic oil cooler, radiators, cooling system parts, boom cylinder, bucket cylinder, cylinder assembly, hoist cylinders, lift cylinder, steering cylinder, cylinder parts, differential parts, stepping motor, starter, final drives, travel motor, final drive parts, gear pumps, hydraulic pump, main hydraulic pump, pilot pump, piston pump, steering pump, transmission pump, transmission charging pump, misc. pumps, pump parts, slewing rings, swing drive assembly, swing gear box, swing motor, swing drive parts, transmission, dropbox, torque converter, transmission parts, front idlers, recoil spring assemblies, rollers, sprockets, tracks, control valve parts, bearings, bushings, pins, seals.
Ruik's Fused couplers are used to split optical signals between two fibers or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request. Fused PM Fiber Standard Coupler Features Applications High Power Handling Coherent Communication Low Insertion Loss Power Monitor High Stability & Reliability Fiber Sensor Specifications Parameter Unit Value Center Wavelength nm 1550 Operating Bandwidth nm �20 Max. Excess Loss dB 0.8 Min. Extinction Ratio dB 18 Min. Directivity dB 50 Max. Return Loss dB 55 Max. Optical Power(CW) W 1 Fiber Type - PM 1550 fiber / HI1060 Package Dimension mm �?3*54 Operating Temperature -5~+75 Storage Temperature -40~+85 Splitting Ratio Tolerance 50/50 % �4.8 40/60 % �3.9 30/70 % �2.5 20/80 % �2.3 10/90 % �2.1 5/95 % �1.4 1/99 % �0.5 Company introduction; High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
The 808nm series high power laser diodes with optimized QW structure made by htoe have a high reliability, high performance. It has several structures of emitter width. The 808nm series high power laser diodes can get 300mW 500mW 1.0W 2.0W 3.0W and 5.0W at RT and CW condition. These products can be applied to solid-state laser pumping sources, medical usage, target designation, and free space optical communication applications. 3W 808nm+/-10nm High Power Laser Diode !We have 2 kinds of mounting method, the C-Mount and TO3. Bidders please contact us to confirm mount type before shipment! If you don't have to contact us, we will first express TO3 for you! Outline drawings as following: Applications: 1)Solid-state Laser Pumping 2)Medical Usage 3)Target Designator 4)Free-space Optical Communication Warranty: 1) 30 days warranty from the date of delivery for manufacturer's defact only. 2) Damage caused by dust or operation mistaked can not be warranted. 3) We accept return & refund within 10 days after delivery for quality problem. 4) Buyer pays the return freight in case of return. Buyer Notice: 1) Buyers must be 18 years old and must have enough experience of using high power laser diodes. 2) Improper operation may cause damage to the laser diodes, especially for the over current operation. Seller doesn't take responsibility for these damage or loss. Shipping: 1) The handling time is around 3 workdays. 2) The shipping will be via Express Service within around 7 workdays globally.
Supplier: Circulation pump, vibration speed sensor, machine of shaft, casing, casting parts, electrical actuator, small size with big toque, seamless carbon steel and stainless steel pipes and tubes, welding seam pipe
Supplier: Aluminum alloy die casting parts, zinc alloy die casting parts, alumimnum die casting housing, led lamp casting cases, casting fuel pump housing etc.
Services: Oem services, odm service
Description: Choke manifold control console as a control assembly in hydraulic choke manifold, can remote control the open/close of hydraulic valve for a long distance and the control panel can indicate the standpipe pressure, casing pressure and the opening/closing condition of hydraulic choke valve as well as the pulse number and frequency of the mud pump if pump stroke counter equipped, which can keep the pressure under well and is a necessary device to control kick and blowout and perform the pressure control technology in oil/gas well.
SO-E2-960 Limiting Current Type Sensor Oxygen Sensors When voltage is applied to a zirconia electrolyte cell, oxygen is pumped through the zirconia disc from the cathode side to the anode side because the carriers of the current flowing through the zirconia electrolyte are oxygen ions. By attaching a cap with a pinhole on the cathode side of the cell and by increasing the voltage over the cell the current shows saturation due to the rate limiting step in the transfer of oxygen to the cathode. This saturation current is called limiting current and is nearly proportional to the ambient oxygen concentration. Below the advantages of the oxygen sensor: measuring range 1.00 to 96.0 vol.% oxygen High accuracy For many types a more or less linear characteristic Small temperature dependence of the sensor signal Low interference with other gases Long service life In many cases "Single point calibration" necessary only once Applications: Medical Laboratory Food industry Household/Gastronomy Measuring technique Security technology/Monitoring (Electrical-) industry Characteristic Data: Measuring gas: Oxygen concentration Measuring medium: Gaseous atmosphere Measuring principle: Limiting current type sensor Measuring ranges: 1.00 - 96.0 vol.% O2 Response time (t90): 2 to 25 sec. (Depends on: sensor type, gas flow, measuring chamber) Sensor voltage / heating voltage / power consumption / heater cold resistance Sensor voltage: 0.7 to 1.6 Volt Heating voltage: 3.6 - 4.4 Volts Power consumption: 1.3 to 1.8 Watts (depends on application and packaging) Cold resistance: R( 25'C ) = 3.25 ohm ± 0.20 ohm Warm up time: Min. 30 s
