Split Case Pump Suppliers and Manufacturers

Horinontal split case pumps have been developed for the most exacting conditions and can be used for multitude operations such as pumping crude oil, oil and hydrocarbons. Further, it can also be used to pump river water, hot water and black water. The design features an axial split.

Horinontal split case pumps have been developed for the most exacting conditions and can be used for multitude operations such as pumping crude oil, oil and hydrocarbons. Further, it can also be used to pump river water, hot water and black water. The design features an axial split.

HS(V)type series pump is new generation single stage double suction split casing centrifugal pump that is designed and produced by foreign advanced manufacturing technology of 1990's 20th century. Performance Range Inlet diameter 125 1600 mm Outlet diameter 80 1400 mm Capacity 30000 m3/h Head 200 m Working temperature 105 Solid particles 80mg/L Permitted working pressure 2.5 MPa Permitted testing pressure 3.75 Mpa

Tobee®split case pump Specification: Size (discharge): 1 inch to 32 inch Capacity: 3.4~ 7500 m3/hr Head: 8.6~140m Efficiency:up to 92% Materials:cast iron, ss 304, ss 316, cd4mcu, duplex ss, bronze etc

S split case pump is a new generation of single stage double suction centrifugal split pump with high performance and efficiency upgraded from S type split case pump, it is mainly applied to liquid transferring occasions, including water works, air conditioner circulation water, heat supply pipe network system, building water supply, irrigation, drainage pump station, power station, industrial water supply system, fire fighting system, ship industry, water supply and drainage for mines. Product name : Single stage double suction Split case pump Item : KSB Omega type Features : ---Axially split casing ---Double suction single-stage impeller, hydraulically and statically balanced. ---Horizontal or vertical installation ---Shaft sealed by gland packing or mechanical seal ---Various materials available with cast iron, ductile iron, bronze and stainless steel, or with corrosion proof coating used in wet parts. Data sheet : Flow: up to 12300m3/h Head: up to 200m Speed: 1480r/min, 2950r/min (50HZ) 1750r/min, 3540r/min(60HZ) Temperature: 105max Working pressure:2.5MPa Application: ---Industrial and municipal water supply ---Chilled and condenser water circulating systems

Pump Size : DN 80 to 350 mm Capacity : up to 3200 m2/hr Head : up to 87 m Pressure : up to 10 bar Temperature : up to 800C Speed : up to 1450 rpm

Split Case Pumps

Horizontal Axially Split casing pump is a new generation of single stage double suction centrifugal split pump with high performance and efficiency upgraded from S type split case pump, it is mainly applied to liquid transferring occasions, including water works, air conditioner circulation water, heat supply pipe network system, building water supply, irrigation, drainage pump station, power station, industrial water supply system, fire fighting system, ship industry, water supply and drainage for mines. Product name : Single stage double suction Split case pump Item : Andritz type Features : ---Axially split casing ---Double suction single-stage impeller, hydraulically and statically balanced. ---Horizontal or vertical installation ---Shaft sealed by gland packing or mechanical seal ---Various materials available with cast iron, ductile iron, bronze and stainless steel, or with corrosion proof coating used in wet parts. Data sheet : Flow: up to 36000m3/h Head: up to 220m Frequency: 50HZ / 60HZ Temperature: 105 max Working pressure:2.5MPa Application: ---Industrial and municipal water supply ---Chilled and condenser water circulating systems

Kirloskar Horizontal Axially Split Casing Pumps type UP Thrubore Range : Delivery size upto 250 mm Capacity upto 950 m3/hr Heads upto 52 metres. Application : Suitable for handling water with slight impurities in Industries, Water Works, Storm Water, Irrigation, Sprinkler Irrigation, Fire-fighting, Air Conditioning Plants, Water Circulation, Waste Water Treatment Plants, Processing Plants, Power Plants, Fertiliser Plants, Refinery, Paper, Sugar and Textile Mills etc. Constructional Features : These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz. Special Features : * Direct or gear drive. * Rotating assembly available for inspection or maintenance by removing only upper half casing without disturbing suction and delivery piping and motor. * Pump axis horizontal or vertical * Vertical pump, direct drive or with universal shaft arrangement * Highest reliability. Material of Construction : Casing half Upper/Lower - C.I.. / Bronze / SGI / Cast Steel / CF8M Impeller - C.I. / Bronze / Ph.Br. / Cast Steel / CF8M Shaft - Carbon Steel / ST. Steel Other materials on request.

Wholesale High Performance Eifel Brand Name Pipeline Pumps Product Description Pump type: EA series stainless steel single stage end suction centrifugal pump Design Standard: European standard BS EN733/DIN24255 Structure: Horizontal,Axial End-Suction,Single-Stage,Volute Casing,Back pull-out Discharge Size: DN32~300mm Flange: DIN2501 PN16 GB/T17241.6 PN1.6 Casing: ASTM304/ASTM316 Impeller: ASTM304/ASTM316 Shaft: ASTM420 standard,ASTM304/ASTM316/ASTM1045 options on request Shaft Seal: Mechanical Seal standard,Gland Packing options on request Flow Rate(Q): 4~1584m3/h Head(H): 2~150m Speed: 1450/2900rpm(50Hz);1750/3500 rpm(60Hz) Max Temperature: 85�°C(standard);105�°C(option on request) Working Pressure: 1.0MPa(standard);1.6MPa(option on request) Conveying Medium: water/liquid Advantage: Interchangeable parts,high-effective,high performance,voice-saving,easily installed and maintained Applications : Food and chemical industry,water supply and drainage,HVAC and Cooling Tower,marine-ballasting&bilge,booster and pressurization set,irrigation and agriculture,fire-fighting system,plants,mines,air-condition systems,etc.

FP40-400 Double-Flow Axial Split Case Pump with efficiencies of up to 91%, split case pumps help to save valuable energy. All pumps are fitted with a double-flow radial impeller which achieves very favorable NPSH value. Centrifugal Pumps are operating successfully all over the world. They offer robustness and wear resistance and thus fulfil high customer expectations in terms of efficiency, life cycle, maintenance friendliness and economic efficiency. Fields of application: Cooling water, circulation water pumps Power stations industrial plants District heating networks Raw water pumps for water treatment Plants Drinking water pumps for water Supply systems

The XBD-HS Series fire pump is designed as per NFPA20 standard, the pump is used to provide water to stand pipe, sprinkler, chemical mitigation and hydrant systems for fire suppression in industrial and commercial facilities. The performance is similar to Peerless AEF series Product name :Split case fire pump (NFPA20 standard) Item :electric driven, diesel dirven pump set Features : XBD series fire fighting pumps, including multistage pump, horizontal End suction pump, horizontal split casing pumps ,vertical inline pumps designed and manufactured in accordance with International Standard, can be motor powered and diesel powered, these pumps are ideal for fire fighting applications in harbors and wharfs, airports ), as well as ocean ships and industrial and civil high buildings. Customer's requirements shall be tailored for higher capacities and pressure. Data sheet : Flow: up to 12300m3/h Head: up to 200m Speed: 1480r/min, 2950r/min (50HZ) 1750r/min, 3540r/min(60HZ) Temperature: 105; max Working pressure:2.5MPa Application: ---Industrial and municipal water supply ---Chilled and condenser water circulating systems ---Water treatment plants ---Fire fighting ---Irrigation and sprinkler pumping stations

MSH Split Case Pump Size (discharge): 1 inch to 32 inch Capacity: 3.4~ 15000 m3/hr Head: 8.6~140m Efficiency:Up to 92% Materials:Cast iron,SS 304,SS 316,Bronze etc MSH Split Case Pump Introduction: MSH Split Case Pump is Horizontal, Split-casing, and Double-suction centrifugal water pump. Double Volute casing is used to contract the axial force due to high head to extend the serve lift time of bearing. Because of the short distance of two bearing, the shaft is shortened to avoid much vibration.. Closed and Circulated cooling system is applied within the sealing house.The Shaft sleeve and O-ring are used to avoid any connection between the shaft and fluid. MSH Split Case Pump Features: Both inlet and outlet of this pump are placed under the axial line,, the pump casing is opened in the middle so it is unnecessary to remove the water inlet and outlet pipelines and motor.if repaired The pump moves CW viewing from the motor side. The pump moving CCW can also be made . Both pump casing and cover form the working chamber of the impeller and there are threaded holes for mounting vacuum and pressure meters on the flanges ant both inlet and outlet have water draining plug on the lower side of flange The impeller is static-balance and dynamic balance tested, fixed by the the side nuts and the Shaft sleeve nuts and its axial position can be adjusted via the nuts and axial force will be get balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axial end. This pump shaft is supported by two centripetal ball bearings, which are mounted inside of the bearing chamber on both ends of the pump and lubricated with grease. The double suction seal ring is used to reduce the leakage.. This pump is driven directly via flexible coupling.(V-belt driving will be available if required). The shaft seal is mechanical seal or packing seal . MSH Split Case pump Parameter Selection Table: Pump model Capacity(m3/h) Head(m) Speed(rpm) Power(KW) MSH150 112--220 35--84 2900 30--55 MSH200 160--351 31--100 2900 37--110 MSH250 324--612 8.6--65.1 1450 22--132 MSH300 504--1663 8.7--140 1450--1470 22--680 MSH350 745--1570 10--125 1450--1470 55--630 MSH400 900--1620 32--85.5 980--1480 440--500 MSH500 1150--3800 10.6--108 740--970 110--800 MSH600 2300--4000 13--80 730--970 145--730 MSH700 2111--4896 39.5--99.5 742--980 397--1252 MSHS800 3960--6878 23--84 600--750 450--1600 MSH1000 6600--9900 32--52 600 1250 MSH1200 5832--14400 6--95.7 500--745 710--3450 MSH Split Case pump On-site Application: MSH split case pump is suitable for transporting pure water or liquids with physical and chemical properties to water. Suitable for mine Suitable for water supply and drainage in factory. Suitable for power station. Suitable for urban water supply and drainage Suitable for flood control.

Performance Range Flow Rate (Q) Up to 8000 m3/h Head (H) Up to 210m Speed (RPM) 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ) Temperature -10 Celsius to 130 Celsius

With short gaps in the both ends of support, XS type pump works stably with less noise and vibration. It can be risen speed operation to meet wider usage. Being inlet and outlet located in the same center line, the pipelines arrangement looks simple and beautiful. The rotor can be operated in reverse direction to avoid damage to the pumps from water hammer. Unique design of high temperature, using middle support, thickening pump casing, seal cooling and oil lubrication bearing make XS type pump suitable for working at 200, especially for heat supply newtwork requirements. XS type pump case body can be vertically or horizontally installation acoording to different working condition, with mechanical seals or packing seals. Wtih industrial designs to the shape of XS type pump, the line of pump is clear and beautiful to in line with modern aesthetics. Cost advantage: 1. Using the advanced hydraulic model, the efficiency of XS pump is 2%~3% higher than the same type pumps. The operating cost minimum. 2. The vacuum height of XS type pump is risen 1-3 meter to reduce land construction investment and to extend the service life. 3. Using inport brand bearing, such as SKF, NSK and using various pump material make XS type pump suitable for any site working condition and minimize the maintenance cost. Maintenance advantage: 1. With container type mechanical seal, the mechanical seal of pump is very easy and simple to replace. 2. With elastic ripess assembling, the rotor parts is easy and rapid to assembly and disassembly. 3. It is unnecessary to make adjustment to any gap when assembling.

Centrifugal pump